Engine, Hybrid System
Dtc Check / Clear
In this manual: Engine, Hybrid System
~1min read
DTC CHECK / CLEAR
1. CHECK DTC
(a) Check the DTCs.
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Read the DTCs following the prompts on the Techstream screen. Enter the following menus: Chassis / Four Wheel Drive / Trouble Codes.
(5) Check the details of the DTCs (See page
).
2. CLEAR DTC
(a) Clear the DTCs.
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Operate the Techstream to clear the DTCs. Enter the following menus: Chassis / Four Wheel Drive / Trouble Codes.
(5) According to the display on the Techstream, select the trouble code data display with the clear button.
Was this page helpful?