DTC NO. | Fail-safe Operation | Fail-safe Deactivation Condition |
U0100 |
Prohibits switching to 4L or switching from 4L for all shift positions |
CAN communication signal from ECM is received |
U0122 |
Prohibits all switching except from 4H to 2WD |
CAN communication signal from skid control ECU is received |
U0416 |
Prohibits all switching except from 4H to 2WD |
Wheel speed sensor malfunction signals from skid control ECU return to normal |
P0560 |
Maintains current 4WD mode |
B terminal voltage becomes 9.5 V or higher (for 1 second) |
P17A0 |
Prohibits switching from 2WD to 4H |
Recovers from open circuit in the A.D.D. shift motor drive circuit (for 1 second) |
P17A1 |
Prohibits switching from 2WD to 4H |
Recovers from short to ground in the A.D.D. shift motor drive circuit (for 1 second) |
P17A2 |
Prohibits switching from 2WD to 4H |
Recovers from short to B+ in the A.D.D. shift motor (for 1 second) |
P17A4 |
Prohibits switching from 2WD to 4H |
A.D.D. actuator limit switch (2 lines) signal returns to normal (for 1 second) |
P17A5 |
Prohibits switching from 2WD to 4H while the vehicle is being drive |
Recovers from open circuit in the solenoid coil drive circuit and the ignition switch turned from off to ON |
P17A6 |
Prohibits switching from 2WD to 4H while the vehicle is being driven |
Recovers from short to ground in the solenoid coil drive circuit and the ignition switch is turned from off to ON |
P17A7 |
Prohibits switching from 2WD to 4H while the vehicle is being driven |
Recovers from short to B+ in the solenoid coil drive circuit and the ignition switch is turned from off to ON |
P17A8 |
Prohibits all switching (maintains the current position) |
Recovers from open circuit in the transfer shift motor drive circuit and the ignition switch is turned from off to ON |
P17A9 |
Prohibits all switching (maintains the current position) |
Recovers from short to ground in the transfer shift motor drive circuit and the ignition switch is turned from off to ON |
P17AA |
Prohibits all switching (maintains the current position) |
Recovers from short to B+ in the transfer shift motor drive circuit and the ignition switch is turned from off to ON |
P17AB |
Prohibits all switching (maintains the current position) |
Recovers from short to ground in the transfer shift actuator limit switch and the ignition |
P17AC |
Prohibits all switching (maintains the current position) |
Transfer shift actuator limit switch signal is returns to normal and the ignition switch is turned from off to ON |
P2772 |
Prohibits all switching (maintains the current position) |
4WD HIGH and LOW position signals return to normal (for 1 second) |
P279E |
Prohibits all switching (maintains the current position) |
Transfer position switch signal returns to normal (for 1 second) |