A part-time 2-speed WF1AM transfer uses a touch select 2-4 and high-low system, enabling the driver to switch between 2WD, 4H and 4L modes by turning the transfer position switch.
Through these switch signals, the 4 wheel drive control ECU actuates the shift motor in the transfer shift actuator and another shift motor in the A.D.D. actuator (differential vacuum actuator assembly).
2. DRIVING MODE SWITCHING PATTERN
Text in Illustration
*1
Transfer Position Switch
-
-
3. INDICATOR LIGHT AND WARNING BUZZER OPERATING CONDITIONS
Mode
4HI Indicator Light
4LO Indicator Light
Warning Buzzer
2WD
Not illuminated
Not illuminated
Not sounding
Switching from 2WD to 4H
Blinking
Not illuminated
Not sounding
2WD to 4L switch request (not permitted)
Blinking
Not illuminated
Sounding
4H
Illuminated
Not illuminated
Not sounding
Switching from 4H to 2WD
Blinking
Not illuminated
Not sounding
Switching from 4H to 4L
Illuminated
Blinking
Not sounding
4H to 4L switch request (not permitted)
Illuminated
Blinking
Sounding
4L
Not illuminated
Illuminated
Not sounding
Switching from 4L to 2WD
Blinking
Illuminated
Not sounding
4L to 2WD switch request (not permitted)
Blinking
Illuminated
Sounding
Switching from 4L to 4H
Blinking
Illuminated
Not sounding
Malfunctioning
Rapidly blinking
Rapidly blinking
Not sounding
Blinking: Blinks at 0.5 second intervals (0.5 seconds on and 0.5 seconds off)
Rapidly blinking: Blinks at 0.25 second intervals (0.25 seconds on and 0.25 seconds off)
4. FUNCTION OF COMPONENTS
Components
Functions
Transfer position switch
Allows switching between the 3 drive modes: 2WD, 4HI and 4LO.
Combination meter assembly
4HI indicator light
Illuminates to inform the user of 4HI mode status.
Blinks to inform the user of mode switching.
Rapidly blinks to inform the user of a system malfunction.
4LO indicator light
Illuminates to inform the user of 4LO mode status.
Blinks to inform the user of mode switching.
Rapidly blinks to inform the user of a system malfunction.
Warning buzzer
Sounds an alarm if a violation of the conditions required for mode shifting occurs when the transfer mode is shifted.
Skid control ECU
Outputs wheel speed signals to the 4 wheel drive control ECU via CAN communication.
Speed sensors
Detects the speeds of all 4 wheels and sends that information to the skid control ECU.
ECM
Outputs information such as the shift lever position and engine speed to the 4 wheel drive control ECU via CAN communication.
Park/neutral position switch
Detects the shift lever position and sends that information to the ECM.
4 wheel drive control ECU
Determines the vehicle status from wheel and engine speed signals received via CAN communication, and according to the operation of the transfer position switch, switches to the requested 4WD mode by operating the transfer shift actuator assembly.
Transfer shift actuator assembly
Operates the transfer shift motor according to commands sent from the 4 wheel drive control ECU and switches to 4WD mode.
Transfer indicator switch
Detects the 2WD, 4HI and 4LO positions and sends that information to the 4 wheel drive control ECU.