Body front. Wings

In this manual: Body front. Wings
Technical data. Panel gaps - front — 1Body front. Lock carrier — 1Body front. Wings — 1Body front. Bulkhead — 1Bonnet, flaps, cab, central locking. Bonnet — 1Bonnet, flaps, cab, central locking. Rear lid — 1Bonnet, flaps, cab, central locking. Charging flap unit — 1Front door, central locking. Door — 1Front door, central locking. Door components — 1Front door, central locking. Central locking — 1Rear door,sliding door,wing doors,central locking. Door — 1Rear door,sliding door,wing doors,central locking. Door components — 1Sliding roof. Sliding sunroof — 1Bumper. Bumper, front — 1Bumper. Bumper, rear — 1Glazing & window mechanism. Repair notes — 1Glazing & window mechanism. Windscreen — 1Glazing & window mechanism. Rear windscreen — 1Glazing & window mechanism. Side windows — 1Glazing & window mechanism. Door windows — 1Exterior equipment. Spoiler — 1Exterior equipment. Mouldings, trims, extensions — 1Exterior equipment. Underbody cladding — 1Exterior equipment. Roof moulding and roof railing — 1Exterior equipment. Exterior mirror — 1Exterior equipment. Wheel housing liner — 1Exterior equipment. Lettering and emblems — 1Exterior equipment. Bicycle carrier — 1Exterior equipment. Trim film and protective film — 1Interior equipment. Compartments & covers — 1Interior equipment. Equipment — 1Interior equipment. Centre console — 1Interior equipment. Front centre armrest — 1Interior equipment. Interior mirror — 1Passenger protection. Seat belts — 1Passenger protection. Child seat anchors — 1Passenger protection. Airbag system — 1Passenger protection. Airbag control unit — 1Passenger protection. Front airbag, driver side — 1Passenger protection. Front passenger airbag — 1Passenger protection. Side airbags — 1Passenger protection. Curtain airbags — 1Passenger protection. Airbag crash sensors — 1Passenger protection. Seat occupied recognition — 1Trim, noise insulation. Front door trims — 1Trim, noise insulation. Rear door trims — 1Trim, noise insulation. Dash panel — 1Trim, noise insulation. Central tube for dash panel — 1Trim, noise insulation. Interior trims — 1Trim, noise insulation. Roof trims — 1Trim, noise insulation. Luggage compartment trims — 1Seat frames. Overview of seat variants — 1Seat frames. Front seats — 1Seat frames. Rear seats — 1Seat padding, covers. Front seat covers and padding — 1Seat padding, covers. Rear seat covers and padding — 1Vehicle-specific paintwork information. Explanation of symbols — 1Vehicle-specific paintwork information. Paintwork structure — 1Vehicle-specific paintwork information. Areas exposed to stone chipping — 1Vehicle-specific paintwork information. Masked sectors — 1Vehicle-specific paintwork information. Seam sealing — 1Vehicle-specific paintwork information. Underseal — 1Vehicle-specific paintwork information. Cavity sealing — 1Vehicle-specific paintwork information. Contrasting colours — 1Vehicle-specific paintwork information. Paintwork repair — 1Technical data. Acoustic considerations during vehicle development — 1Technical data. General procedure for identifying noises — 1Technical data. Volkswagen equipment for localising noises — 1Technical data. Borescope VAS 6748A — 1Technical data. Causes — 1Technical data. Locating water ingress — 1Technical data. Attachments — 1Technical data. Vehicle identification data — 1Technical data. Safety information — 1Technical data. Body parts and materials — 1Technical data. Alignment jig — 1Body front. Longitudinal member cross panel — 1Body front. Longitudinal member — 1Body front. Front wheel housing — 1Body centre, roof, frame. Roof — 1Body centre, roof, frame. A-pillar — 1Body centre, roof, frame. B-pillar — 1Body centre, roof, frame. Side member — 1Body, rear. Rear cross member — 1Body, rear. Rear cross panel — 1Body, rear. Luggage compartment floor — 1Body, rear. Rear longitudinal member — 1Body, rear. Side panel — 1Body, rear. Rear wheel housing — 1General information, Body. Basic information on body repairs — 1General information, Body. Explanation of symbols — 1General information, Body. Overview of materials used — 1General information, Body. Joining and separating techniques — 1General information, Body. Surface repair — 1General information, Body. Corrosion protection — 1General information, Body. Noise insulation — 1General information, Body. Plastic repair — 1General information, Body. Welding plastic attachments — 1General information, Body. General notes – windows — 1General information, Body. Glass repair — 1General information, Body. Use of adhesives — 1General information, Body. Self-adhesive components — 1General information, Body. Noises — 1General information, Body. Preparing for disposal — 1General information, Body. Leaks — 1General information, paint. Safety information — 1General information, paint. General information — 1Genuine products. Filler — 1Genuine products. Priming metal — 1Genuine products. Priming plastic materials — 1Genuine products. Surfacer — 1Genuine products. 2-pack top coats — 1Repair painting work. Paint finish – decorative strips and films — 1Repair painting work. Tips and tricks — 1Air conditioner. Overview of fitting locations — 1Air conditioner. Refrigerant circuit — 1Air conditioner. Valve unit of heat pump — 1Air conditioner. Air conditioner compressor — 1Air conditioner. Control motors — 1Air conditioner. Front heater and air conditioning unit — 1Air conditioner. Air duct — 1Air conditioner. Coolant circuit — 1Air conditioner. Other controlling and regulating components — 1Air conditioner. Air quality improvement system — 11-speed gearbox 0MH, rear, EQ310. Technical data — 11-speed gearbox 0MH, rear, EQ310. Gearbox mechanics,operation, construction,diff — 11-speed gearbox 0MH, rear, EQ310. Final drive, differential, differential lock — 1General information. High voltage — 1Electric drive EIP220, EIA200, EIA210. Technical data — 1Electric drive EIP220, EIA200, EIA210. Engine assy,cylinder block,crankcase — 1Electric drive EIP220, EIA200, EIA210. Engine cooling — 1Electric drive. High-voltage components, charging unit and voltage converter — 1Electric drive. Warning stickers — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing without wax — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing with wax — 1Electric drive. Power and control electronics for electric drive — 1Electric drive. Electric drive motor — 1Electric drive. Motor control unit — 1Electric drive. De-energising high-voltage system — 1Electric drive. Re-energise high-voltage system — 1Electric drive. Potential equalisation lines — 1Electric drive. Charging socket, with charging cable — 1Electric drive. Charging socket, with separate charging cable — 1Electric drive. Charging unit for high-voltage battery — 1Electric drive. Charging unit for high-voltage battery, with integrated voltage converter — 1Electric drive. Vehicle noise & engine sound — 1Electric drive. Accelerator pedal — 1Electric drive. Voltage converter — 1Electric drive. High-voltage cables, all-wheel drive — 1Electric drive. High-voltage cables, rear-wheel drive — 1Front suspension, drive shafts. Front axle — 1Front suspension, drive shafts. Subframe — 1Front suspension, drive shafts. Suspension strut, upper suspension link — 1Front suspension, drive shafts. Lower suspension link, swivel joint — 1Front suspension, drive shafts. Wheel bearing — 1Front suspension, drive shafts. Anti-roll bar — 1Rear suspension, drive shaft. Rear axle — 1Rear suspension, drive shaft. Subframe — 1Rear suspension, drive shaft. Anti-roll bar — 1Rear suspension, drive shaft. Suspension link, track rod — 1Rear suspension, drive shaft. Suspension strut, shock absorber, spring — 1Rear suspension, drive shaft. Wheel bearing assembly, trailing arm — 1Rear suspension, drive shaft. Drive shaft — 1Self-levelling air spring system. Electronically controlled damping — 1Self-levelling air spring system. Vehicle level sender — 1Wheels, tyres. axle align. Wheel alignment — 1Wheels, tyres. axle align. Wheels, tyres — 1Steering. Steering wheel — 1Steering. Steering column — 1Steering. Steering rack — 1Brake system. Technical data — 1ABS, ADR, TCS, EDL, ESP. Overview of fitting locations — 1ABS, ADR, TCS, EDL, ESP. Control unit and hydraulic unit — 1ABS, ADR, TCS, EDL, ESP. Sensors — 1Brake, brake mechanics. Front brake — 1Brake, brake mechanics. Rear brake — 1Brake, brake mechanics. Parking brake — 1Brake, brake mechanics. Brake pedal — 1Brakes, hydraulics, regulator, servo. Brake servo and brake master cylinder — 1Brakes, hydraulics, regulator, servo. Hydraulic system — 1Wheels and Tyres Guide. Wheels, tyres. axle align — 1Wheels, tyres. axle align. Instructions on using the guide — 1Wheels, tyres. axle align. Legislative and technical conditions — 1Wheels, tyres. axle align. Wheel change — 1Wheels, tyres. axle align. Fitting tyre — 1Wheels, tyres. axle align. Wheel bolts — 1Wheels, tyres. axle align. Information on tyres — 1Wheels, tyres. axle align. Handling problems — 1Wheels, tyres. axle align. Evaluating tyres — 1Wheels, tyres. axle align. Tyre wear — 1Starter-current supply-CC. Battery — 1Instruments, GCI. Dash panel insert — 1Instruments, GCI. Horn — 1Windscreen wipewash system. Windscreen wiper system — 1Windscreen wipewash system. Windscreen washer system — 1Windscreen wipewash system. Rear window wiper system — 1Windscreen wipewash system. Rear window washer system — 1Lights, lamps, switches outside. LED headlight — 1Lights, lamps, switches outside. LED matrix headlight — 1Lights, lamps, switches outside. Tail lights — 1Lights, lamps, switches outside. Lights in exterior mirror — 1Lights, lamps, switches outside. Number plate light — 1Lights, lamps, switches outside. Entry and start authorisation system — 1Lights, lamps, switches outside. Steering column switch module — 1Lights, lamps, switches outside. Towing bracket — 1Lights, lamps, switches inside, anti-theft system. Lights — 1Lights, lamps, switches inside, anti-theft system. Controls — 1Lights, lamps, switches inside, anti-theft system. Anti-theft alarm system — 1Lights, lamps, switches inside, anti-theft system. Cigarette lighter, socket — 1Wiring. Relay carriers, fuse holders, electronics boxes — 1Wiring. Control units — 1Infotainment. Componentscontrol units — 1Infotainment. Multifunction steering wheel — 1Driver assist systems. Senders, sensors, control units — 1Driver assist systems. Adaptive cruise control — 1Driver assist systems. Reversing camera system — 1Driver assist systems. Front camera for driver assist systems — 1Driver assist systems. Overhead view camera — 1Electrical system. Starter-current supply-CC — 1Electrical system. Windscreen wipe and wash system — 1Wiring. Wires and lines — 1Wiring. Cleaning contact surfaces — 1
~5min read
0102030405086N·mlb·ft
Tightening torque found on this page
  • Assembly overview – wing
  • Removing and installing wing
  • Removing and installing wing bracket
  • Removing and installing end plate
  • Removing and installing front deformation element bracket
  • Removing and installing rear deformation element bracket

Assembly overview – wing

Assembly overview – wing

Overview shown for left side of vehicle as an example

1 - A-pillar cover

❏ → Rep. gr.66; Removing and installing A-pillar cover

2 - Bracket for deformation element

❏ Rear

❏ → Rep. gr.50; Removing and installing rear deformation element bracket

3 - Bolt

❏ Qty. 6

❏ 8 N·m

4 - Wing

❏ → Rep. gr.50; Removing and installing wing

5 - A-pillar end plate

❏ → Rep. gr.50; Removing and installing end plate

6 - Nut

❏ Qty. 2

❏ 2,5 N·m

7 - Guide profile

❏ Different versions → see Electronic parts catalogue (ETKA)

8 - Bolt with two captive washers

❏ Connecting wing panel brace with wing and guide profile

❏ Qty. 2

❏ 8 N·m

9 - Wing panel brace

❏ → Rep. gr.50; Removing and installing wing bracket

10 - Bolt

❏ Deformation element

❏ Wing panel brace

❏ Qty. 4

❏ 8 N·m

11 - Deformation element

❏ Front

❏ → Rep. gr.50; Removing and installing front deformation element bracket

Removing and installing wing

Removing and installing wing

Removal and installation are described for left side of vehicle as an example.

Removing

– Remove headlight → Electrical system; Rep. gr.94; Headlights; Removing and installing headlights.

– Remove wheel housing liner → Rep. gr.66; Removing and installing front wheel housing liner.

– Remove A-pillar cover → Rep. gr.66; Removing and installing A-pillar cover.

Vehicles with A-pillar cover bracket

– Remove A-pillar cover bracket → Rep. gr.66; Mouldings, trims, extensions; Removing and installing A-pillar cover bracket.

All vehicles (continued)

– Unscrew nut -5-, and detach guide profile -6-.

– Unscrew centre hex studs -7-.

– Pull off closure section in upper area.

– Unscrew bolts -2-.

– Remove wing -1-.

Installing

Install in reverse order of removal, observing the following:

Vehicles with pop rivet nut in wing

If a new wing is installed

– Install pop rivet nut -1-.

Important

● Pop rivet nut -1- must be inserted prior to installation of wing -2-.

All vehicles (continued)

If A-pillar has been renewed:

– Install pop rivet nuts -1-.

Important

● Pop rivet nuts -1- must be inserted prior to installation of wing.

All vehicles (continued)

– Align wing free of tension with wing panel brace loosened → Rep. gr.50; Removing and installing wing bracket.

– Wax threaded connection for side member -1- → Rep. gr.00; General information, paint; Technical data; Corrosion protection of body parts, attachments and welded parts.

– Make sure that parts are parallel and gaps are even → Rep. gr.00; Gaps at front and → Rep. gr.00; Gaps in centre.

Tightening torques

♦ → Rep. gr.50; Assembly overview – wing

Removing and installing wing bracket

Removing and installing wing bracket

Special tools and workshop equipment required

♦ Setting gauge -3371-

Removal and installation are described for left side of vehicle as an example.

Design of wing panel brace may vary depending on equipment/version

Removing

– Remove wing → Rep. gr.50; Removing and installing wing.

– Unscrew bolts -2-.

– Remove wing bracket -1-.

Installing

Install in reverse order of removal, observing the following:

– Align wing free of stress.

– Check gaps with setting gauge -3371-, observing → Rep. gr.00; front gaps and → Rep. gr.00; centre gaps while doing so.

Tightening torques

♦ → Rep. gr.50; Assembly overview – wing

Removing and installing end plate

Removing and installing end plate

Removal and installation are described for the left side of vehicle as an example.

Removing

– Remove door → Rep. gr.57; Removing and installing door.

– Remove front wheel housing liner → Rep. gr.66; Removing and installing front wheel housing liner.

– Release locking devices -2-.

– Slightly pull end plate -1- at top in direction of -arrow A- off wing -3-, and pull it out in direction of -arrow B-.

Installing

Install in reverse order of removal, observing the following:

– Align end plate -1- against wing in direction of arrows -A- and -B-.

– Push end plate against wing in direction of arrow -A- until locking devices -2- engage.

Removing and installing front deformation element bracket

Removing and installing front deformation element bracket

Special tools and workshop equipment required

♦ Setting gauge -3371-

Removal and installation are described for left side of vehicle as an example.

Removing

– Remove wing → Rep. gr.50; Removing and installing wing.

– Unscrew bolts -2-.

– Remove deformable element -1-.

Installing

Install in reverse order of removal, observing the following:

Deformation elements must be aligned with bonnet and bumper cover along with the wing.

– Align wing free of stress.

– Verify gaps using setting gauge -3371-. Observe → Chapter „Panel gaps - front“ when doing this.

Tightening torques

♦ → Rep. gr.50; Assembly overview – wing

Removing and installing rear deformation element bracket

Removing and installing rear deformation element bracket

Special tools and workshop equipment required

♦ Setting gauge -3371-

Removal and installation are described for left side of vehicle as an example.

Removing

– Remove wing → Rep. gr.50; Removing and installing wing.

– Unscrew bolts -2-.

– Remove bracket for deformation element -1-.

Installing

Install in reverse order of removal, observing the following:

– Align wing free of stress.

– Verify gaps using setting gauge -3371-. Observe → Chapter „Panel gaps - front“ when doing this.

Tightening torques

♦ → Rep. gr.50; Assembly overview – wing