Wheels, tyres. axle align. Wheel alignment

In this manual: Wheels, tyres. axle align. Wheel alignment
Technical data. Panel gaps - front — 1Body front. Lock carrier — 1Body front. Wings — 1Body front. Bulkhead — 1Bonnet, flaps, cab, central locking. Bonnet — 1Bonnet, flaps, cab, central locking. Rear lid — 1Bonnet, flaps, cab, central locking. Charging flap unit — 1Front door, central locking. Door — 1Front door, central locking. Door components — 1Front door, central locking. Central locking — 1Rear door,sliding door,wing doors,central locking. Door — 1Rear door,sliding door,wing doors,central locking. Door components — 1Sliding roof. Sliding sunroof — 1Bumper. Bumper, front — 1Bumper. Bumper, rear — 1Glazing & window mechanism. Repair notes — 1Glazing & window mechanism. Windscreen — 1Glazing & window mechanism. Rear windscreen — 1Glazing & window mechanism. Side windows — 1Glazing & window mechanism. Door windows — 1Exterior equipment. Spoiler — 1Exterior equipment. Mouldings, trims, extensions — 1Exterior equipment. Underbody cladding — 1Exterior equipment. Roof moulding and roof railing — 1Exterior equipment. Exterior mirror — 1Exterior equipment. Wheel housing liner — 1Exterior equipment. Lettering and emblems — 1Exterior equipment. Bicycle carrier — 1Exterior equipment. Trim film and protective film — 1Interior equipment. Compartments & covers — 1Interior equipment. Equipment — 1Interior equipment. Centre console — 1Interior equipment. Front centre armrest — 1Interior equipment. Interior mirror — 1Passenger protection. Seat belts — 1Passenger protection. Child seat anchors — 1Passenger protection. Airbag system — 1Passenger protection. Airbag control unit — 1Passenger protection. Front airbag, driver side — 1Passenger protection. Front passenger airbag — 1Passenger protection. Side airbags — 1Passenger protection. Curtain airbags — 1Passenger protection. Airbag crash sensors — 1Passenger protection. Seat occupied recognition — 1Trim, noise insulation. Front door trims — 1Trim, noise insulation. Rear door trims — 1Trim, noise insulation. Dash panel — 1Trim, noise insulation. Central tube for dash panel — 1Trim, noise insulation. Interior trims — 1Trim, noise insulation. Roof trims — 1Trim, noise insulation. Luggage compartment trims — 1Seat frames. Overview of seat variants — 1Seat frames. Front seats — 1Seat frames. Rear seats — 1Seat padding, covers. Front seat covers and padding — 1Seat padding, covers. Rear seat covers and padding — 1Vehicle-specific paintwork information. Explanation of symbols — 1Vehicle-specific paintwork information. Paintwork structure — 1Vehicle-specific paintwork information. Areas exposed to stone chipping — 1Vehicle-specific paintwork information. Masked sectors — 1Vehicle-specific paintwork information. Seam sealing — 1Vehicle-specific paintwork information. Underseal — 1Vehicle-specific paintwork information. Cavity sealing — 1Vehicle-specific paintwork information. Contrasting colours — 1Vehicle-specific paintwork information. Paintwork repair — 1Technical data. Acoustic considerations during vehicle development — 1Technical data. General procedure for identifying noises — 1Technical data. Volkswagen equipment for localising noises — 1Technical data. Borescope VAS 6748A — 1Technical data. Causes — 1Technical data. Locating water ingress — 1Technical data. Attachments — 1Technical data. Vehicle identification data — 1Technical data. Safety information — 1Technical data. Body parts and materials — 1Technical data. Alignment jig — 1Body front. Longitudinal member cross panel — 1Body front. Longitudinal member — 1Body front. Front wheel housing — 1Body centre, roof, frame. Roof — 1Body centre, roof, frame. A-pillar — 1Body centre, roof, frame. B-pillar — 1Body centre, roof, frame. Side member — 1Body, rear. Rear cross member — 1Body, rear. Rear cross panel — 1Body, rear. Luggage compartment floor — 1Body, rear. Rear longitudinal member — 1Body, rear. Side panel — 1Body, rear. Rear wheel housing — 1General information, Body. Basic information on body repairs — 1General information, Body. Explanation of symbols — 1General information, Body. Overview of materials used — 1General information, Body. Joining and separating techniques — 1General information, Body. Surface repair — 1General information, Body. Corrosion protection — 1General information, Body. Noise insulation — 1General information, Body. Plastic repair — 1General information, Body. Welding plastic attachments — 1General information, Body. General notes – windows — 1General information, Body. Glass repair — 1General information, Body. Use of adhesives — 1General information, Body. Self-adhesive components — 1General information, Body. Noises — 1General information, Body. Preparing for disposal — 1General information, Body. Leaks — 1General information, paint. Safety information — 1General information, paint. General information — 1Genuine products. Filler — 1Genuine products. Priming metal — 1Genuine products. Priming plastic materials — 1Genuine products. Surfacer — 1Genuine products. 2-pack top coats — 1Repair painting work. Paint finish – decorative strips and films — 1Repair painting work. Tips and tricks — 1Air conditioner. Overview of fitting locations — 1Air conditioner. Refrigerant circuit — 1Air conditioner. Valve unit of heat pump — 1Air conditioner. Air conditioner compressor — 1Air conditioner. Control motors — 1Air conditioner. Front heater and air conditioning unit — 1Air conditioner. Air duct — 1Air conditioner. Coolant circuit — 1Air conditioner. Other controlling and regulating components — 1Air conditioner. Air quality improvement system — 11-speed gearbox 0MH, rear, EQ310. Technical data — 11-speed gearbox 0MH, rear, EQ310. Gearbox mechanics,operation, construction,diff — 11-speed gearbox 0MH, rear, EQ310. Final drive, differential, differential lock — 1General information. High voltage — 1Electric drive EIP220, EIA200, EIA210. Technical data — 1Electric drive EIP220, EIA200, EIA210. Engine assy,cylinder block,crankcase — 1Electric drive EIP220, EIA200, EIA210. Engine cooling — 1Electric drive. High-voltage components, charging unit and voltage converter — 1Electric drive. Warning stickers — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing without wax — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing with wax — 1Electric drive. Power and control electronics for electric drive — 1Electric drive. Electric drive motor — 1Electric drive. Motor control unit — 1Electric drive. De-energising high-voltage system — 1Electric drive. Re-energise high-voltage system — 1Electric drive. Potential equalisation lines — 1Electric drive. Charging socket, with charging cable — 1Electric drive. Charging socket, with separate charging cable — 1Electric drive. Charging unit for high-voltage battery — 1Electric drive. Charging unit for high-voltage battery, with integrated voltage converter — 1Electric drive. Vehicle noise & engine sound — 1Electric drive. Accelerator pedal — 1Electric drive. Voltage converter — 1Electric drive. High-voltage cables, all-wheel drive — 1Electric drive. High-voltage cables, rear-wheel drive — 1Front suspension, drive shafts. Front axle — 1Front suspension, drive shafts. Subframe — 1Front suspension, drive shafts. Suspension strut, upper suspension link — 1Front suspension, drive shafts. Lower suspension link, swivel joint — 1Front suspension, drive shafts. Wheel bearing — 1Front suspension, drive shafts. Anti-roll bar — 1Rear suspension, drive shaft. Rear axle — 1Rear suspension, drive shaft. Subframe — 1Rear suspension, drive shaft. Anti-roll bar — 1Rear suspension, drive shaft. Suspension link, track rod — 1Rear suspension, drive shaft. Suspension strut, shock absorber, spring — 1Rear suspension, drive shaft. Wheel bearing assembly, trailing arm — 1Rear suspension, drive shaft. Drive shaft — 1Self-levelling air spring system. Electronically controlled damping — 1Self-levelling air spring system. Vehicle level sender — 1Wheels, tyres. axle align. Wheel alignment — 1Wheels, tyres. axle align. Wheels, tyres — 1Steering. Steering wheel — 1Steering. Steering column — 1Steering. Steering rack — 1Brake system. Technical data — 1ABS, ADR, TCS, EDL, ESP. Overview of fitting locations — 1ABS, ADR, TCS, EDL, ESP. Control unit and hydraulic unit — 1ABS, ADR, TCS, EDL, ESP. Sensors — 1Brake, brake mechanics. Front brake — 1Brake, brake mechanics. Rear brake — 1Brake, brake mechanics. Parking brake — 1Brake, brake mechanics. Brake pedal — 1Brakes, hydraulics, regulator, servo. Brake servo and brake master cylinder — 1Brakes, hydraulics, regulator, servo. Hydraulic system — 1Wheels and Tyres Guide. Wheels, tyres. axle align — 1Wheels, tyres. axle align. Instructions on using the guide — 1Wheels, tyres. axle align. Legislative and technical conditions — 1Wheels, tyres. axle align. Wheel change — 1Wheels, tyres. axle align. Fitting tyre — 1Wheels, tyres. axle align. Wheel bolts — 1Wheels, tyres. axle align. Information on tyres — 1Wheels, tyres. axle align. Handling problems — 1Wheels, tyres. axle align. Evaluating tyres — 1Wheels, tyres. axle align. Tyre wear — 1Starter-current supply-CC. Battery — 1Instruments, GCI. Dash panel insert — 1Instruments, GCI. Horn — 1Windscreen wipewash system. Windscreen wiper system — 1Windscreen wipewash system. Windscreen washer system — 1Windscreen wipewash system. Rear window wiper system — 1Windscreen wipewash system. Rear window washer system — 1Lights, lamps, switches outside. LED headlight — 1Lights, lamps, switches outside. LED matrix headlight — 1Lights, lamps, switches outside. Tail lights — 1Lights, lamps, switches outside. Lights in exterior mirror — 1Lights, lamps, switches outside. Number plate light — 1Lights, lamps, switches outside. Entry and start authorisation system — 1Lights, lamps, switches outside. Steering column switch module — 1Lights, lamps, switches outside. Towing bracket — 1Lights, lamps, switches inside, anti-theft system. Lights — 1Lights, lamps, switches inside, anti-theft system. Controls — 1Lights, lamps, switches inside, anti-theft system. Anti-theft alarm system — 1Lights, lamps, switches inside, anti-theft system. Cigarette lighter, socket — 1Wiring. Relay carriers, fuse holders, electronics boxes — 1Wiring. Control units — 1Infotainment. Componentscontrol units — 1Infotainment. Multifunction steering wheel — 1Driver assist systems. Senders, sensors, control units — 1Driver assist systems. Adaptive cruise control — 1Driver assist systems. Reversing camera system — 1Driver assist systems. Front camera for driver assist systems — 1Driver assist systems. Overhead view camera — 1Electrical system. Starter-current supply-CC — 1Electrical system. Windscreen wipe and wash system — 1Wiring. Wires and lines — 1Wiring. Cleaning contact surfaces — 1
~8min read
  • Notes on wheel alignment
  • Test requirements
  • Specifications for wheel alignment
  • Setting vehicle to initial position for wheel alignment
  • When does wheel alignment have to be checked?
  • Adjusting camber at front wheels
  • Adjusting camber at rear wheels
  • Adjusting toe setting at rear wheels
  • Adjusting toe setting at front wheels
  • Checking full steering lock
  • Preparations for testing

Notes on wheel alignment

Notes on wheel alignment

Wheel alignment must always be performed using wheel alignment equipment approved for the relevant brand.

All information required for wheel alignment is provided by the wheel alignment computer.

Vehicles pulling to one side; accident vehicles

This may be due to the rack not being positioned exactly in the centre of the steering rack unit when driving in a straight line.

This is enough to result in slight steering assistance in one direction, which causes the vehicle to pull to the left or right.

Test requirements

Test requirements

A wheel alignment platform and wheel alignment units which have been tested and correctly adjusted are basic requirements.

Suspension, wheel bearings and steering must have been checked for excessive play and damage.

Tread depth difference must be no more than 2 mm on one axle.

Tyres inflated to correct pressures.

Vehicle must be at unladen weight.

Spare wheel must be in specified location in vehicle.

Tool kit must be in specified location in vehicle.

Sliding plates and turntables must not be touching the end stop during the alignment procedure.

Alignment unit must be properly attached and adjusted; refer to operating instructions of equipment manufacturer.

Initial instruction must have been provided by manufacturer of wheel alignment unit.

Specifications for wheel alignment

Specifications for wheel alignment

Front axleStandard running gear + DCCSports running gear + DCCPR numbersG01 / G03G02 / G05Total toe (without load)10′ ± 10'10′ ± 10'Camber (in straight-ahead position)-36′ ± 30'-45′ ± 30'Maximum permissible camber difference between both vehicle sidesmax. 30'max. 30'Toe-out on turns with 20° steering angle1° 20′ ± 20′1° 20′ ± 20′Caster5° 29′ ± 30′5° 40′ ± 30′Maximum permissible caster difference between both vehicle sidesmax. 30'max. 30'Ride height422 ± 10 mm406 ± 10 mm

Camber is not adjustable on front axle. Only minor corrections can be achieved by shifting subframe.

Toe-out on turns can also be displayed as a negative value on the wheel alignment computer, depending on the manufacturer.

Rear axleStandard running gear + DCCSports running gear + DCCPR numbersG01 / G03G02Total track (at prescribed camber)16′ ± 10'16′ ± 10'Camber -1° 30′ ± 30′-1° 30′ ± 30′Maximum permissible camber difference between both vehicle sidesmax. 30'max. 30'Max. permissible deviation from direction of travelmax. 20'max. 20'Ride height 424 ± 10 mm414 ± 10 mm

Measuring ride height

– Ride height is defined by dimension -a- between centre of wheel hub and lower edge of wheel housing.

Setting vehicle to initial position for wheel alignment

Setting vehicle to initial position for wheel alignment

If ride height is not as specified → Rep. gr.44; Specifications for wheel alignment:

– Front axle: balance out ride height by adding weights to respective suspension turret.

– Rear axle: balance out ride height by placing weights in luggage compartment at respective side.

When does wheel alignment have to be checked?

When does wheel alignment have to be checked?

Wheel alignment must be checked:

♦ If there are problems with handling caused by the running gear

♦ If the vehicle has been involved in an accident or components have been renewed

♦ If suspension components have been removed or renewed

♦ If tyres are worn unevenly.

Components renewed

All vehicles (continued)

Front suspension component renewedWheel alignment check requiredRear suspension component renewedWheel alignment check required YesNo YesNoSuspension link X Lower suspension linkX Suspension link bush X Upper suspension link (front/rear)X Wheel bearing housingX Spring control armX Track rod/track rod ball jointX Track rodX Steering rackX Wheel bearing housingX SubframeX SubframeX Suspension strut X Spring XAnti-roll bar X Shock absorber X Anti-roll bar X

Components removed and installed

All vehicles (continued)

Front suspension component removed and reinstalledWheel alignment check requiredRear suspension component removed and reinstalledWheel alignment check required YesNo YesNo Suspension link X Lower suspension linkX Wheel bearing housing X Upper suspension link (front/rear)X Track rod/track rod ball jointX Track rodX Steering rackX Spring control armX Subframe X → Remark Wheel bearing housingX Suspension strut XSubframe X → Remark Anti-roll bar X Spring X Shock absorber X Anti-roll bar X

1) Prerequisite: the position of the subframe was fixed before the part was removed → Rep. gr.42; Fixing position of subframe.

2) Prerequisite: the position of the subframe was fixed before the part was removed → Rep. gr.42; Fixing position of subframe.

Adjusting camber at front wheels

Adjusting camber at front wheels

Front axle camber cannot be adjusted; it can only be corrected slightly by moving the subframe.

The subframe may be moved to the left or right, but NOT forwards or backwards in a longitudinal direction.

– Remove underbody trim (front) → General body repairs, exterior; Rep. gr.66; Underbody trim; Removing and installing underbody trim (front).

– Remove bolts -2- one by one and screw in new bolts loosely.

– Only remove next bolt -2- after replacing previously removed bolt with a new bolt -2-.

The camber adjustment range is limited by the tolerances of the holes in the subframe -1-. If the specified value is not obtained by moving the subframe -1-, the subframe and the body must be inspected.

– Camber can now be adjusted to specification by moving subframe -1-.

– Move subframe -1- sideways until camber is the same on both sides → Rep. gr.44; Wheel alignment specifications.

– Tighten bolts -2-.

Tightening torques

♦ → Rep. gr.40; Exploded view - subframe

♦ → General body repairs, exterior; Rep. gr.66; Underbody trim; Exploded view - underbody trim

Adjusting camber at rear wheels

Adjusting camber at rear wheels

– Loosen nut -4- on inside of spring control arm -3-.

– Adjust camber by turning eccentric bolt -2-.

Note

Maximum adjustment range is 90° to left or right of centre position.

– Tighten new nut -4-, counterholding at eccentric bolt -2-.

– Check camber meets specification → Rep. gr.44; Wheel alignment specifications.

Tightening torques

♦ → Rep. gr.42; Exploded view - spring control arm

Adjusting toe setting at rear wheels

Adjusting toe setting at rear wheels

– Loosen nut -5- on inside of track rod -3-.

– Adjust toe setting by turning eccentric bolt -2-.

Note

The maximum adjustment range is 90° to the left or right of the centre position.

– Tighten new nut -5-, counterholding at eccentric bolt -2-.

– Check toe setting meets specification → Rep. gr.44; Wheel alignment specifications.

Tightening torques

♦ → Rep. gr.42; Exploded view - track rod

Adjusting toe setting at front wheels

Adjusting toe setting at front wheels

– Loosen nut -2- (counterhold at hexagon flats -arrow A- on track rod -1-).

– Loosen track rod -1- at track rod ball joint -3-. To do so, apply suitable tool at hexagon flats -arrow A- and -arrow B-.

– Adjust toe setting at left and right wheels by turning hexagon flats -arrow A-. When doing this, counterhold at hexagon flats -arrow B-.

NOTICE

Risk of damage to boots if they are twisted.

– Make sure boot on steering rack is not damaged or twisted. Twisted rubber boots wear out quickly.

– Only tighten lock nut for threaded piece with vehicle standing on the ground.

– Tighten lock nut -2-.

– Check toe setting meets specification → Rep. gr.44; Wheel alignment specifications.

Tightening torques

♦ → Rep. gr.48; Exploded view - track rods

Checking full steering lock

Checking full steering lock

The wheel alignment unit is used to determine the full steering lock.

– If the value for the full steering lock is outside the permitted tolerances or the steering wheel is not straight, observe the following procedure:

– Check steering and suspension components for damage and deformation.

– Check symmetry of track rods.

– Renew any damaged components.

– Measure dimension -a- on both track rod ball joints. Adjust track rod ball joints to same dimension.

Important

● Dimension -a- must be the same on left and right track rod ball joint.

● Maximum permitted tolerance between left and right is < 2.5 mm.

– When returning steering to centre position, allow steering wheel to settle by rocking it evenly back and forth past centre position a few times.

Preparations for testing

Preparations for testing

♦ Proper toe setting is not possible without wheel runout compensation.

♦ Any existing lateral runout of the wheels must be compensated for, otherwise the result will be falsified.

♦ The specified toe-in tolerance may already be exceeded by the permitted amount of axial runout at the wheel rims. In such cases it is not possible to set the toe-in correctly without first compensating for the wheel runout.

♦ Observe the instructions from the manufacturer of the wheel alignment equipment.