Glazing & window mechanism. Windscreen

In this manual: Glazing & window mechanism. Windscreen
Technical data. Panel gaps - front — 1Body front. Lock carrier — 1Body front. Wings — 1Body front. Bulkhead — 1Bonnet, flaps, cab, central locking. Bonnet — 1Bonnet, flaps, cab, central locking. Rear lid — 1Bonnet, flaps, cab, central locking. Charging flap unit — 1Front door, central locking. Door — 1Front door, central locking. Door components — 1Front door, central locking. Central locking — 1Rear door,sliding door,wing doors,central locking. Door — 1Rear door,sliding door,wing doors,central locking. Door components — 1Sliding roof. Sliding sunroof — 1Bumper. Bumper, front — 1Bumper. Bumper, rear — 1Glazing & window mechanism. Repair notes — 1Glazing & window mechanism. Windscreen — 1Glazing & window mechanism. Rear windscreen — 1Glazing & window mechanism. Side windows — 1Glazing & window mechanism. Door windows — 1Exterior equipment. Spoiler — 1Exterior equipment. Mouldings, trims, extensions — 1Exterior equipment. Underbody cladding — 1Exterior equipment. Roof moulding and roof railing — 1Exterior equipment. Exterior mirror — 1Exterior equipment. Wheel housing liner — 1Exterior equipment. Lettering and emblems — 1Exterior equipment. Bicycle carrier — 1Exterior equipment. Trim film and protective film — 1Interior equipment. Compartments & covers — 1Interior equipment. Equipment — 1Interior equipment. Centre console — 1Interior equipment. Front centre armrest — 1Interior equipment. Interior mirror — 1Passenger protection. Seat belts — 1Passenger protection. Child seat anchors — 1Passenger protection. Airbag system — 1Passenger protection. Airbag control unit — 1Passenger protection. Front airbag, driver side — 1Passenger protection. Front passenger airbag — 1Passenger protection. Side airbags — 1Passenger protection. Curtain airbags — 1Passenger protection. Airbag crash sensors — 1Passenger protection. Seat occupied recognition — 1Trim, noise insulation. Front door trims — 1Trim, noise insulation. Rear door trims — 1Trim, noise insulation. Dash panel — 1Trim, noise insulation. Central tube for dash panel — 1Trim, noise insulation. Interior trims — 1Trim, noise insulation. Roof trims — 1Trim, noise insulation. Luggage compartment trims — 1Seat frames. Overview of seat variants — 1Seat frames. Front seats — 1Seat frames. Rear seats — 1Seat padding, covers. Front seat covers and padding — 1Seat padding, covers. Rear seat covers and padding — 1Vehicle-specific paintwork information. Explanation of symbols — 1Vehicle-specific paintwork information. Paintwork structure — 1Vehicle-specific paintwork information. Areas exposed to stone chipping — 1Vehicle-specific paintwork information. Masked sectors — 1Vehicle-specific paintwork information. Seam sealing — 1Vehicle-specific paintwork information. Underseal — 1Vehicle-specific paintwork information. Cavity sealing — 1Vehicle-specific paintwork information. Contrasting colours — 1Vehicle-specific paintwork information. Paintwork repair — 1Technical data. Acoustic considerations during vehicle development — 1Technical data. General procedure for identifying noises — 1Technical data. Volkswagen equipment for localising noises — 1Technical data. Borescope VAS 6748A — 1Technical data. Causes — 1Technical data. Locating water ingress — 1Technical data. Attachments — 1Technical data. Vehicle identification data — 1Technical data. Safety information — 1Technical data. Body parts and materials — 1Technical data. Alignment jig — 1Body front. Longitudinal member cross panel — 1Body front. Longitudinal member — 1Body front. Front wheel housing — 1Body centre, roof, frame. Roof — 1Body centre, roof, frame. A-pillar — 1Body centre, roof, frame. B-pillar — 1Body centre, roof, frame. Side member — 1Body, rear. Rear cross member — 1Body, rear. Rear cross panel — 1Body, rear. Luggage compartment floor — 1Body, rear. Rear longitudinal member — 1Body, rear. Side panel — 1Body, rear. Rear wheel housing — 1General information, Body. Basic information on body repairs — 1General information, Body. Explanation of symbols — 1General information, Body. Overview of materials used — 1General information, Body. Joining and separating techniques — 1General information, Body. Surface repair — 1General information, Body. Corrosion protection — 1General information, Body. Noise insulation — 1General information, Body. Plastic repair — 1General information, Body. Welding plastic attachments — 1General information, Body. General notes – windows — 1General information, Body. Glass repair — 1General information, Body. Use of adhesives — 1General information, Body. Self-adhesive components — 1General information, Body. Noises — 1General information, Body. Preparing for disposal — 1General information, Body. Leaks — 1General information, paint. Safety information — 1General information, paint. General information — 1Genuine products. Filler — 1Genuine products. Priming metal — 1Genuine products. Priming plastic materials — 1Genuine products. Surfacer — 1Genuine products. 2-pack top coats — 1Repair painting work. Paint finish – decorative strips and films — 1Repair painting work. Tips and tricks — 1Air conditioner. Overview of fitting locations — 1Air conditioner. Refrigerant circuit — 1Air conditioner. Valve unit of heat pump — 1Air conditioner. Air conditioner compressor — 1Air conditioner. Control motors — 1Air conditioner. Front heater and air conditioning unit — 1Air conditioner. Air duct — 1Air conditioner. Coolant circuit — 1Air conditioner. Other controlling and regulating components — 1Air conditioner. Air quality improvement system — 11-speed gearbox 0MH, rear, EQ310. Technical data — 11-speed gearbox 0MH, rear, EQ310. Gearbox mechanics,operation, construction,diff — 11-speed gearbox 0MH, rear, EQ310. Final drive, differential, differential lock — 1General information. High voltage — 1Electric drive EIP220, EIA200, EIA210. Technical data — 1Electric drive EIP220, EIA200, EIA210. Engine assy,cylinder block,crankcase — 1Electric drive EIP220, EIA200, EIA210. Engine cooling — 1Electric drive. High-voltage components, charging unit and voltage converter — 1Electric drive. Warning stickers — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing without wax — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing with wax — 1Electric drive. Power and control electronics for electric drive — 1Electric drive. Electric drive motor — 1Electric drive. Motor control unit — 1Electric drive. De-energising high-voltage system — 1Electric drive. Re-energise high-voltage system — 1Electric drive. Potential equalisation lines — 1Electric drive. Charging socket, with charging cable — 1Electric drive. Charging socket, with separate charging cable — 1Electric drive. Charging unit for high-voltage battery — 1Electric drive. Charging unit for high-voltage battery, with integrated voltage converter — 1Electric drive. Vehicle noise & engine sound — 1Electric drive. Accelerator pedal — 1Electric drive. Voltage converter — 1Electric drive. High-voltage cables, all-wheel drive — 1Electric drive. High-voltage cables, rear-wheel drive — 1Front suspension, drive shafts. Front axle — 1Front suspension, drive shafts. Subframe — 1Front suspension, drive shafts. Suspension strut, upper suspension link — 1Front suspension, drive shafts. Lower suspension link, swivel joint — 1Front suspension, drive shafts. Wheel bearing — 1Front suspension, drive shafts. Anti-roll bar — 1Rear suspension, drive shaft. Rear axle — 1Rear suspension, drive shaft. Subframe — 1Rear suspension, drive shaft. Anti-roll bar — 1Rear suspension, drive shaft. Suspension link, track rod — 1Rear suspension, drive shaft. Suspension strut, shock absorber, spring — 1Rear suspension, drive shaft. Wheel bearing assembly, trailing arm — 1Rear suspension, drive shaft. Drive shaft — 1Self-levelling air spring system. Electronically controlled damping — 1Self-levelling air spring system. Vehicle level sender — 1Wheels, tyres. axle align. Wheel alignment — 1Wheels, tyres. axle align. Wheels, tyres — 1Steering. Steering wheel — 1Steering. Steering column — 1Steering. Steering rack — 1Brake system. Technical data — 1ABS, ADR, TCS, EDL, ESP. Overview of fitting locations — 1ABS, ADR, TCS, EDL, ESP. Control unit and hydraulic unit — 1ABS, ADR, TCS, EDL, ESP. Sensors — 1Brake, brake mechanics. Front brake — 1Brake, brake mechanics. Rear brake — 1Brake, brake mechanics. Parking brake — 1Brake, brake mechanics. Brake pedal — 1Brakes, hydraulics, regulator, servo. Brake servo and brake master cylinder — 1Brakes, hydraulics, regulator, servo. Hydraulic system — 1Wheels and Tyres Guide. Wheels, tyres. axle align — 1Wheels, tyres. axle align. Instructions on using the guide — 1Wheels, tyres. axle align. Legislative and technical conditions — 1Wheels, tyres. axle align. Wheel change — 1Wheels, tyres. axle align. Fitting tyre — 1Wheels, tyres. axle align. Wheel bolts — 1Wheels, tyres. axle align. Information on tyres — 1Wheels, tyres. axle align. Handling problems — 1Wheels, tyres. axle align. Evaluating tyres — 1Wheels, tyres. axle align. Tyre wear — 1Starter-current supply-CC. Battery — 1Instruments, GCI. Dash panel insert — 1Instruments, GCI. Horn — 1Windscreen wipewash system. Windscreen wiper system — 1Windscreen wipewash system. Windscreen washer system — 1Windscreen wipewash system. Rear window wiper system — 1Windscreen wipewash system. Rear window washer system — 1Lights, lamps, switches outside. LED headlight — 1Lights, lamps, switches outside. LED matrix headlight — 1Lights, lamps, switches outside. Tail lights — 1Lights, lamps, switches outside. Lights in exterior mirror — 1Lights, lamps, switches outside. Number plate light — 1Lights, lamps, switches outside. Entry and start authorisation system — 1Lights, lamps, switches outside. Steering column switch module — 1Lights, lamps, switches outside. Towing bracket — 1Lights, lamps, switches inside, anti-theft system. Lights — 1Lights, lamps, switches inside, anti-theft system. Controls — 1Lights, lamps, switches inside, anti-theft system. Anti-theft alarm system — 1Lights, lamps, switches inside, anti-theft system. Cigarette lighter, socket — 1Wiring. Relay carriers, fuse holders, electronics boxes — 1Wiring. Control units — 1Infotainment. Componentscontrol units — 1Infotainment. Multifunction steering wheel — 1Driver assist systems. Senders, sensors, control units — 1Driver assist systems. Adaptive cruise control — 1Driver assist systems. Reversing camera system — 1Driver assist systems. Front camera for driver assist systems — 1Driver assist systems. Overhead view camera — 1Electrical system. Starter-current supply-CC — 1Electrical system. Windscreen wipe and wash system — 1Wiring. Wires and lines — 1Wiring. Cleaning contact surfaces — 1
~6min read
  • Assembly overview – windscreen
  • Removing and installing windscreen

Assembly overview – windscreen

Assembly overview – windscreen

1 - Windscreen

❏ Depending on equipment/version

❏ → Rep. gr.64; Removing and installing windscreen

❏ → General information – body; Rep. gr.52; General notes – windows; Removing broken window

2 - Body flange

❏ → General information – body; Rep. gr.52; Use of adhesives; Preparing body flange for installation

3 - Centring pin

❏ Position depends on model

❏ Depending on equipment/version

❏ Qty. 2

4 - Mounting for centring pin

❏ Position depends on model

5 - Water deflector

❏ → Rep. gr.66; Removing and installing water deflector strip

6 - Retaining strip

❏ → Rep. gr.66; Removing and installing retaining strip

7 - Plenum chamber cover

❏ → Rep. gr.50; Removing and installing plenum chamber cover

8 - Disconnect electrical connector for heated windscreen -Z2-

❏ Depending on model

❏ Depending on equipment/version

9 - Retaining plate for interior mirror

❏ → General body repairs, interior; Rep. gr.68; Interior mirror; Bonding retaining plate for interior mirror

Removing and installing windscreen

Removing and installing windscreen

Special tools and workshop equipment required

♦ Cutting cord -VAS 861 001/1A-

♦ Removal kit for flush bonded windows -V.A.G 1474B-

♦ Removal kit for flush bonded windows -VAS 6452-

♦ Setting gauge -3371-

♦ Windscreen removal set -VAS 861 001A-

Removal of the windscreen is described using window removal set -VAS 861 001A-.

It is also possible to use removal tool for flush bonded windows -V.A.G 1474B- or cutting tool for bonded windows -VAS 6452-.

Removing

– Remove A-pillar upper trims on left and right → General body repairs, interior; Rep. gr.70; Trims, interior; Removing and installing A-pillar trim.

– Remove left and right sun visors → General body repairs, interior; Rep. gr.68; Equipment; Removing and installing sun visor.

– Remove interior mirror → General body repairs, interior; Rep. gr.68; Interior mirror; Removing and installing interior mirror.

Vehicles with rain and light sensor -G397-:

– Remove rain and light sensor -G397- → Electrical system; Rep. gr.92; Windscreen wiper system; Removing and installing rain and light sensor G397.

All vehicles (continued)

For vehicles with front camera for driver assist systems -R242-.

– Remove front camera for driver assist systems -R242- → Driver assist systems; Rep. gr.98; Senders/sensors/control units; Removing and installing front camera for driver assist systems R242.

All vehicles (continued)

NOTICE

Risk of damage from incorrect handling.

– Do not kink moulded headliner.

– Lower moulded headliner in area of windscreen far enough to allow windscreen to be cut out without causing damage to moulded headliner → General body repairs, interior; Rep. gr.70; Roof trims; Removing and installing moulded headliner.

– Remove plenum chamber cover → Rep. gr.50; Removing and installing plenum chamber cover.

– Remove water deflector strip on left and right → Rep. gr.66; Trims/extensions/cladding; Removing and installing water deflector strip.

Vehicles with heated windscreen -Z2-

– Disconnect electrical connector for heated windscreen -Z2-.

– Remove front roof module -WX3- → Electrical system; Rep. gr.96; Controls; Removing and installing front roof module [WX3].

– Unbolt earth cable for heated windscreen -Z2-.

All vehicles (continued)

– In vehicle interior, insert cutting guard from windscreen removal set between cutting cord and dash panel.

– Insert cutting cord -VAS 861 001/1A- -2- in awl -1- from windscreen removal set.

CAUTION

Risk of injury to hands and eyes due to glass splinters.

Danger of cutting yourself.

– Put on safety goggles.

– Put on protective gloves.

NOTICE

Risk of damage to surfaces of components.

– Mask off surrounding components in the visible area with commercially available adhesive tape.

– Cover exit area of awl -1- on body flange with adhesive tape.

– In this area, pierce awl -1- from inside towards outside through adhesive bead, and pull through cutting cord -2- towards outside.

– Lay cutting cord -1- all around beneath windscreen.

– When inserting cutting cord -2- between roof and windscreen, use threading aid -1-.

– Secure outer end of cutting cord -1- to right hinge -2- -arrow-.

– Secure cutting device -1- from windscreen removal set at lower left inner side of window.

– Insert cutting cord -3- into cutting out device -1- -arrow-.

– Tension cutting cord -3- with cutting out device -1-.

– Insert cutting guard -2- between cutting cord -3- and dash panel cover.

– Cut out windscreen in lower area using cutting cord -1-.

– Move cutting device -1- to upper left corner of windscreen.

– Cut out windscreen in direction of -arrow- in area of left A-pillar using cutting cord -1-.

– Move cutting device -2- to upper right corner of windscreen.

– Insert cutting guard -1- between cutting cord -3- and moulded headliner.

– Cut out windscreen in upper area using cutting cord -1-.

– Move cutting device -1- to lower right corner of windscreen.

– Cut out windscreen in direction of -arrow- in area of right A-pillar using cutting cord -1-.

Important

● The aid of an additional person is required for the subsequent work steps.

– Use 2 commercially available suction lifters to lift windscreen out of vehicle.

Installing

Old undamaged windscreen

– → General information - body; Rep. gr.52; Using adhesives; Preparing undamaged windows for installation.

All vehicles (continued)

New windscreen

– → General information - body; Rep. gr.52; Using adhesives; Preparing new windows for installation.

All vehicles (continued)

– → General information - body; Rep. gr.52; Using adhesives; Preparing body flange for installation.

– Observe → General information - body; Rep. gr.52; Using adhesives; Notes on installing bonded windows.

– Observe → General information - body; Rep. gr.52; Using adhesives; Minimum drying times for bonded windows.

– Apply window adhesive all around windscreen → General information - body; Rep. gr.52; Using adhesives; Notes on installing bonded windows.

Dimensions for cross-section of adhesive bead:

♦ Height = 10 mm ±1 mm

♦ Width = 6.5 mm ±0.5 mm

Further installation is carried out in reverse order of removal. Observe the following when doing this:

– Check gaps with setting gauge -3371-, observing → Rep. gr.00; front gaps while doing so.