Removal and Installation — Engine Mount

Special Service Tools / General Equipment

Removal

1. 1
   Position the vehicle in NEUTRAL on the lift.
   Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
2. 2
   Remove the brackets and the lower splash shield.

   

3. 3
   Place a jack and a wooden block under the front of the oil pan to support the engine.
   Use common shop equipment: Jack trolley
   Use common shop equipment: wooden block

   

4. 4
   Remove the degas bottle.
   Refer to: Degas Bottle (303-03C Engine Cooling, Removal and Installation).
5. 5
   Remove the bolts, nuts and engine mount.

   

Installation

1. 1
   
   Hand-tighten the engine mount fasteners.
   

   1. Tighten the engine mount nuts.
      Torque: 81 lb-ft (110 N·m)

   2. Tighten the engine mount bolts.
      Torque: 129 lb-ft (175 N·m)

   

2. 2
   Install the degas bottle.
   Refer to: Degas Bottle (303-03C Engine Cooling, Removal and Installation).
3. 3
   Remove the jack and wooden block from under the engine.
   Use common shop equipment: Jack trolley
   Use common shop equipment: wooden block

   

4. 4
   Install the lower shield and brackets.