Ford Escape Quiz
Powertrain

Removal and Installation - Oil Pressure Switch

In this manual: Powertrain
General Information — 26Chassis — 160Powertrain — 323Electrical — 356Body and Paint — 290
3steps
~18min
2/5difficulty
01020304050118N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Materials

Name Specification
Motorcraft® PTFE Thread Sealant
TA-24-B		 WSK-M2G350-A2

Removal

  1. Position the vehicle in NEUTRAL on the lift.
    Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
  2. Remove the brackets and the lower splash shield.
  3. Shown without oil cooler, with oil cooler similar.
    Disconnect the electrical connector and remove the EOP switch.
    Material: Motorcraft® PTFE Thread Sealant / TA-24-B (WSK-M2G350-A2)
    Torque: 97 lb-in (11 N·m)

Installation

  1. To install, reverse the removal procedure.

Test yourself

A quick Ford Escape quiz: every answer comes with an explanation and a link to the manual page.