Adaptive Learning Drive Cycle - General Procedures

Initialization

1. 1
   Using a scan tool, clear the DTCs and the transmission adaptive tables.
2. 2
   Bring the transmission to normal operating temperature.
3. 3
   With the engine running and the brake applied, select the gears in the following order, pausing in each gear for 4 seconds: N, R, N, D, R, D, N. Repeat this pattern 2 times. If any shifts feel soft or harsh, repeat this procedure.
4. 4
   Drive the vehicle and accelerate with moderate throttle so that the upshift occurs at 2000 RPM up to 80 km/h, and brake moderately to a stop. Repeat this pattern 2 times.
5. 5
   Drive the vehicle and accelerate with moderate throttle so that the upshift occurs at 3000 RPM up to 80 km/h, and brake moderately to a stop. Repeat this pattern 2 times.
6. 6
   With the engine running and the brake applied, select the gears in the following order, pausing in each gear for 4 seconds: N, R, N, D, R, D, N. Repeat this pattern 2 times.