Hyundai Accent Quiz
Brake System

Removal

In this manual: Brake System
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

PROCEDURE

1. Disconnect the brake lines from the master cylinder.

2. Снимите главный тормозной цилиндр.

2. Remove the master cylinder.

Brake fluid dissolves paint, plastic and wire insulation. If brake fluid gets on the painted surfaces of the vehicle or its components, wash them immediately with plenty of water.

3. Disconnect the vacuum hose from the vacuum brake booster.
4. Inside the vehicle, remove the spring cotter pin and remove the clevis pin with head and cotter pin hole.
5. Remove the stop lamp switch.

6. Отверните четыре гайки крепления вакуумного усилителя тормозов.

6. Remove the four nuts securing the vacuum brake booster.
7. Remove the vacuum brake booster.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.