Hyundai Accent Quiz
Brake System

Inspection

In this manual: Brake System
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

PROCEDURE

1. Check the caliper for wear, damage, cracks and rust.
2. Check the piston for rust, damage, cracks and wear on the outer surface.
3. Check the sleeve and guide pin for damage and rust.
4. Check the spring and boots for damage.
5. Check the mounting bolt for wear, damage, cracks and rust.

Do not use sandpaper to clean the piston surface.
All rubber parts must be replaced with new ones.

6. Measure the brake disc thickness. Using a dial indicator, measure the brake disc runout at a small distance from the outer edge.

Brake disc thickness:

Standard: 19 mm
Minimum allowable: 17 mm
Maximum allowable runout: 0.05 mm.

7. При необходимости, замените тормозной диск.

7. If necessary, replace the brake disc.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.