Engine Mounts - Installation

TRANSMISSION MOUNT

1. To prevent the mount stopper from moving, make sure it is correctly inserted into the inner tube of the mount.

2. Install the mount stopper in place, making sure it is correctly positioned.

FRONT ENGINE MOUNT

1. Install the engine mount so that it is at the correct angle (A) to the bracket.

Models with automatic transmission: 27° - 33° Models with manual transmission: 11° - 17°

REAR ENGINE MOUNT

1. Install the engine mount so that it is at the correct angle (B) to the bracket.

Models with automatic transmission: 30° - 36° Models with manual transmission: 17° - 23°

SUBFRAME BUSHINGS

• The bushings of the front and rear subframe crossmembers serve as guides.

• Make sure the support bushings are correctly oriented during installation.

1. Direction marks (arrows) are provided in two places on the upper surface of the subframe crossmembers and on the upper surface of the corresponding support bushings.

2. When installing the support bushings into the inner tubes of the subframe crossmembers, align the arrow on the bushing with the arrow on the subframe crossmember.