Camshaft - Installation

1. Remove all traces of the old gasket and sealant from the mating surfaces of the cylinder head and the cylinder head cover.

2. Apply sealant (Loctite No. 5999) to the cylinder head cover.

3. Install the cylinder head cover.

Tightening torque Cylinder head cover bolts: 8 - 10 N·m 4. Connect the accelerator pedal cable.

5. Connect the positive crankcase ventilation (PCV) hose and the PCV valve hose to the cylinder head cover.

6. Connect the spark plug high-tension cables to the spark plugs.

7. Install the upper timing belt cover and tighten the four bolts.

8. Install the center cover and tighten the five bolts.

Tightening torque Center cover bolts: 2.5 - 3.5 N·m

9. Install the oil filler cap.

10. Install the engine cover.

TIMING CHAIN GUIDE

1. Inspect the chain guide for bending, cracks, or other damage. If necessary, replace the chain guide.

2. Inspect the rubber pad of the chain guide for excessive wear.

If necessary, replace the chain guide.

TIMING CHAIN

Inspect the chain links (bushings and plates) for wear. Replace the chain if wear is excessive.