Hyundai Elantra CN7 Quiz

Intake and Exhaust Systems - Intake Manifold Installation

In this manual: Intake and Exhaust Systems - Intake Manifold Installation
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read

1. Install a new intake manifold gasket and install the intake manifold.

Be careful not to drop the injectors when installing the fuel rail.

2. Установите топливный коллектор вместе с форсунками.

2. Install the fuel rail together with the injectors.

3. Connect the fuel injector wiring harness connector.

4. Install the intake manifold support bracket.

5. Connect the high-pressure fuel hose.

6. Connect the positive crankcase ventilation hose and the brake booster vacuum hose.

7. Connect the intake air hose to the throttle body.

8. Connect the accelerator pedal cable.

9. Connect the idle speed control actuator wiring harness connector and the throttle position sensor wiring harness connector.

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.