Rear Heater (if equipped)

The rear heater can be controlled by pressing the main switch on the instrument panel when the ignition switch is in the "ON" position.

Rear Heater Main Switch

The rear heater main switch is located on the instrument panel.

The main switch is used to turn the rear heater power ON and OFF.

When the button is pressed, the power turns ON and the indicator light in the switch illuminates. When the button is pressed again, the power turns OFF and the light goes out.

CONTROL PANEL

Rear Heater and Air Conditioner (Rotary Type)

Rear Heater and Air Conditioner (Lever Type)

1. Mode Selector Lever

The air flow can be directed in three modes.

Three symbols are used for this: Floor Heat, Bi-level, and Vent Air.

2. Temperature Control

Lever type - Select the desired temperature by moving the lever smoothly to the left or right.

Rotary type - Select the desired temperature by turning the knob left or right.

Red - high temperature (heating) Blue - ambient temperature (ventilation)

3. Blower Control

The blower can be controlled at three speeds (when the ignition switch and the rear heater main switch are in the "ON" position) to adjust the amount of air circulating through the vehicle.

The blower speed increases when the switch is turned to the right.