Hyundai Palisade Quiz
Engine Control System/Fuel System

Injector

In this manual: Engine Control System/Fuel System
General Information — 10Engine Mechanical System — 56Engine Electrical System — 28Emission Control System — 21Engine Control System/Fuel System — 42Automatic Transmission System (A8LF1) — 33All-Wheel Drive (AWD) System — 16Drive Shaft and Axle — 19Suspension System — 28Steering — 17Restraints — 20Brake System — 39Body (Interior and Exterior) — 142Body Electrical System — 171Heating, Ventilation, and Air Conditioning — 47Advanced Driver Assistance System (ADAS) — 44
~1min read

Description and Operation

Description

Based on information from various sensors, the ECM calculates the amount of fuel to be injected. The fuel injector is a solenoid valve; the injection quantity is controlled by the injection duration. The engine control module (ECM) controls each injector by grounding its control circuit. When the ECM supplies power to the injector by grounding the control circuit, the circuit voltage should be low (theoretically 0 V) and fuel is injected. When the ECM de-energizes the injector by opening the control circuit, the fuel injector closes, and the circuit voltage briefly peaks and then stabilizes at the system voltage.
Hyundai Palisade. Description and operation

Specifications

Specification

Item Specification
Coil Resistance (Ω) 1,30–1,44 [20 °C]
Fuel Pressure
[kPa (bar, kgf/cm2)]		 2000 - 1990 MY
(20 - 200, 20.4 - 203)
Operating Voltage (V) 6 - 16
Pin 2

Troubleshooting

Signal Waveform

Hyundai Palisade. Troubleshooting

Circuit Diagrams

Wiring Diagram

Hyundai Palisade. Schematic diagrams
Harness Connector
Hyundai Palisade. Schematic diagrams

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.