To set the speed limiter
In this manual: To set the speed limiter
2steps
~12min
1/5difficulty
Done 0 of 2

- To turn on the system, press the speed limiter button on the steering wheel.
The speed limiter indicator
will illuminate.

- Move the lever down (to SET-).
- Move the lever up (to RES+) or down (to SET-) and release it at the desired speed. Move the lever up (to RES+) or down (to SET-) and hold it. The speed will increase or decrease by 5 km/h (3 mph) each time.

The set speed will be displayed.

To drive faster than the set speed limit, the driver must fully press the accelerator pedal (more than 80%) until the kick-down mechanism engages and a click sound is emitted.
The set speed limit will then flash and a warning chime will sound until the driver returns the vehicle speed to within the set speed limit.
NOTE
- Pressing the accelerator pedal less than 50% will prevent the vehicle from exceeding the set speed limit and will keep the speed within the set limit.
- A click sound from the kick-down mechanism when the accelerator pedal is fully pressed is normal.
Test yourself
A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?