Engine Control System K9K
Malfunction indicator
In this manual: Engine Control System K9K
~1min read
Component Function Check
1.CHECK MI FUNCTION 1. Turn ignition switch ON.2. Make sure that MI lights up.
Is the inspection result normal? YES >> INSPECTION END
NO >> Go to EC-1019, "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK CAN COMMUNICATION LINERefer to LAN-17, "Trouble Diagnosis Flow Chart" Is the inspection result normal? YES >> GO TO 2.
NO >> Repair or replace.
2.CHECK COMBINATION METERRefer to MWI-23, "CONSULT-III Function".
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace.
3.CHECK INTERMITTENT INCIDENTRefer to GI-42, "Intermittent Incident", ???GROUND INSPECTION??? and ???INCIDENT SIMULATION TESTS???.
Is the inspection result normal? YES >> Replace combination meter.
NO >> Repair or replace.
Was this page helpful?