P0487 EGR volume control valve
DTC Logic
DTC DETECTION LOGIC

Diagnosis Procedure
1.CHECK EGR VOLUME CONTROL VALVE CONTROL CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect EGR volume control valve harness connector and ECM harness connector.3. Check the continuity between EGR volume control valve terminal harness connector and ECM harness connector.

4. Also check harness for short to ground and short to power.
OK or NG OK >> GO TO 2.
NG >> Repair open circuit or short to ground or short to power in harness or connectors.
2.CHECK EGR VOLUME CONTROL VALVERefer to EC-952, "Component Inspection".
OK or NG OK >> GO TO 3.
NG >> Replace EGR volume control valve. Refer to EC-881, "Work Procedure".
3.CHECK EGR VOLUME CONTROL VALVE CONTROL POSITION SENSORRefer to EC-952, "Component Inspection".
OK or NG OK >> GO TO 4.
NG >> Replace EGR volume control valve. Refer to EC-881, "Work Procedure".
4.CHECK INTERMITTENT INCIDENTRefer to GI-42, "Intermittent Incident".
>> INSPECTION END
Component Inspection
EGR VOLUME CONTROL VALVE
1. Disconnect EGR volume control valve harness connector.2. Check resistance EGR volume control valve harness connector.

If NG, replace EGR volume control valve. Refer to EC-881, "Work Procedure".
EGR VOLUME CONTROL VALVE CONTROL POSITION SENSOR
1. Disconnect EGR volume control valve harness connector.2. Check continuity EGR volume control valve harness connector.

If NG, replace EGR volume control valve. Refer to EC-881, "Work Procedure".