P0045 TC boost control solenoid valve
DTC Logic
DTC DETECTION LOGIC

Diagnosis Procedure
1.CHECK TURBOCHARGER BOOST CONTROL SOLENOID VALVE POWER SUPPLY CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect turbocharger boost control solenoid valve harness connector. 3. Turn ignition switch ON.4. Check the voltage between turbocharger boost control solenoid valve harness connector and ground.

Is the inspection result normal? YES >> GO TO 3.
NO >> GO TO 2.
2.DETECT MALFUNCTIONING PARTCheck the following.
• Harness for open or short between IPDM E/R and turbocharger boost control solenoid valve
>> Repair open circuit or short to ground or short to power in harness or connectors.
3.CHECK TURBOCHARGER BOOST CONTROL SOLENOID VALVE OUTPUT SIGNAL CIRCUIT FOR OPEN AND SHORT 1. Turn ignition switch OFF. 2. Disconnect ECM harness connector.3. Check the continuity between turbocharger boost control solenoid valve harness connector and ECM harness connector.

4. Also check harness for short to ground and short to power.
Is the inspection result normal? YES >> GO TO 4.
NO >> Repair open circuit or short to ground or short to power in harness or connectors.
4.CHECK TURBOCHARGER BOOST CONTROL SOLENOID VALVERefer to EC-894, "Component Inspection".
Is the inspection result normal? YES >> GO TO 5.
NO >> Replace turbocharger boost control solenoid valve.
5.CHECK INTERMITTENT INCIDENTRefer to GI-42, "Intermittent Incident", ???INCIDENT SIMULATION TESTS??? and ???GROUND INSPECTION???.
>> INSPECTION END
Component Inspection
1.CHECK TURBOCHARGER BOOST CONTROL SOLENOID VALVE 1. Turn ignition switch OFF. 2. Disconnect turbocharger boost control solenoid valve harness connector.3. Check resistance between turbocharger boost control solenoid valve terminals as follows.

Is the inspection result normal? YES >> INSPECTION END
NO >> Replace turbocharger boost control solenoid valve.