Engine Control System K9K
P060A ECM
In this manual: Engine Control System K9K
~1min read
DTC Logic
DTC DETECTION LOGIC

Diagnosis Procedure
1.INSPECTION START 1. Turn ignition switch ON. 2. Erase DTC. 3. Turn ignition switch OFF and wait for 20 seconds.4. Turn ignition switch ON and perform the self-diagnosis.
Is the DTC P060A displayed again? YES >> GO TO 2.
NO >> INSPECTION END
2.REPLACE ECM 1. Replace ECM.2. Go to EC-879, "Work Procedure".
>> INSPECTION END
Was this page helpful?