P0471 exhaust gas pressure sensor 1
DTC Logic
DTC DETECTION LOGIC

NOTE
:
If DTC P0471 is displayed with DTC P0470 or P2226, first perform trouble diagnosis for DTC P0470 or P2226.
Refer to EC-944, "DTC Logic" (P0470), EC-1002, "DTC Logic" (P2226).
Diagnosis Procedure
1.CHECK GROUND CONNECTIONS 1. Turn ignition switch OFF and wait at least 20 seconds.2. Check ground connection E38. Refer to Ground inspection in GI-44, "Circuit Inspection".
Is the inspection result normal? YES >> GO TO 2.
NO >> Repair or replace ground connection.
2.CHECK EXHAUST GAS PRESSURE SENSOR 1 AND EXHAUST GAS PIPE INSTALLATIONCheck exhaust gas pressure sensor and exhaust gas pipe for poor installation and damage.
Is the inspection result normal? YES >> GO TO 3.
NO >> Install exhaust gas pressure sensor and exhaust gas pipe properly.
3.CHECK EXHAUST GAS PRESSURE SENSOR 1 POWER SUPPLY CIRCUIT 1. Disconnect exhaust pressure sensor 1 harness connector. 2. Turn ignition switch ON.3. Check the voltage between exhaust gas pressure sensor 1 harness connector and ground.

Is the inspection result normal? YES >> GO TO 4.
NO >> Repair open circuit or short to ground or short to power in harness or connectors.
4.CHECK EXHAUST GAS PRESSURE SENSOR 1 GROUND CIRCUIT FOR OPEN AND SHORT 1. Turn ignition switch OFF and wait at least 20 seconds.2. Check the continuity between exhaust gas pressure sensor 1 harness connector and ECM harness connector.

3. Also check harness for short to ground and short to power.
Is the inspection result normal? YES >> GO TO 5.
NO >> Repair open circuit or short to ground or short to power in harness or connectors.
5.CHECK EXHAUST PRESSURE SENSOR 1 INPUT SIGNAL CIRCUIT FOR OPEN AND SHORT1. Check the continuity between exhaust gas pressure sensor 1 harness connector and ECM harness connector.

2. Also check harness for short to ground and short to power.
Is the inspection result normal? YES >> GO TO 6.
NO >> Repair open circuit or short to ground or short to power in harness or connectors.
6.CHECK INTERMITTENT INCIDENTRefer to GI-42, "Intermittent Incident".
Is the inspection result normal? YES >> Replace exhaust gas pressure sensor 1.
NO >> Repair or replace.