Brakes
Brake Pipes and Hoses
In this manual: Brakes
~1min read
GENERAL INFORMATION
When replacing pipes, immediately plug the connection being disassembled. ReplacementPROCEDURE
1. When disconnecting the hose, first loosen the union nut, then remove the hose retaining clip from the bracket.
2. Loosen the union nuts of the connections using special wrenches.
3. If the connection is heavily corroded, a gas wrench may be used, but it is recommended to replace the disconnected pipes.
4. It is recommended to purchase brake pipes and hoses only from a Nissan service center.
5. Bend new pipes to fit in place and secure them along their entire length.
6. After connecting, make sure there are no kinks.
Test yourself
A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?