Hyundai Sonata LF Quiz
Engine Control System/Fuel System

RCV Control Solenoid Valve Repair Procedures

In this manual: Engine Control System/Fuel System
General Information — 9Engine Mechanical System — 90Engine Electrical System — 58Emission Control System — 24Engine Control System/Fuel System — 114Drive Shaft and Axle — 15Suspension System — 35Steering — 19Restraints — 50Brake System — 54Body (Interior and Exterior) — 213Body Electrical System — 241Heating, Ventilation, and Air Conditioning — 56DCT (Dual Clutch Transmission) System — 52
8steps
~48min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 8

Inspection

  1. Turn the ignition off.
  2. Disconnect the RCV connector.
  3. Measure the resistance between RCV terminals 1 and 2.
  4. Make sure the resistance is within specification.

    Specification: Refer to "Specifications"

Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Remove the air cleaner cover (A). (Refer to Engine Mechanical System - "Air Cleaner")
  3. Disconnect the RCV control solenoid valve connector (A) and the vapor hoses (B).
  4. Remove the RCV solenoid valve (D) by loosening the mounting bolts (C).

Installation
  • Install the component with the specified torque.
  • Note that internal damage may occur if the component is dropped. If the component has been dropped, inspect it before installation.
  1. Install in the reverse order of removal. RCV solenoid valve bracket bolt: 9.8 ~ 11.8 N·m

Test yourself

A quick Hyundai Sonata LF quiz: every answer comes with an explanation and a link to the manual page.