Driving

Stop & Start system

~13min read

The Stop & Start system stops and restarts the engine based on your operation of the clutch pedal while the vehicle is stopped.

Using the Stop & Start system

■ Stopping the engine

1. With the clutch pedal fully depressed, depress the brake pedal and bring the vehicle to a stop.

2. Shift the shift lever to N, then release the clutch pedal.

The Stop & Start indicator comes on.

Toyota CH-R. Utilisation des systèmes d'aide à la conduite

■ Restarting the engine Make sure the shift lever is in N, then depress the clutch pedal.

The Stop & Start indicator turns off.

Turning off the Stop & Start system

Press the Stop & Start system off button to turn off the system.

The Stop & Start system off indicator comes on.

Press the button again to turn the Stop & Start system back on; the Stop & Start system off indicator turns off.

Toyota CH-R. Utilisation des systèmes d'aide à la conduite

■ Automatic reactivation of the Stop & Start system Even if the Stop & Start system has been turned off by pressing the Stop & Start system off button, it turns back on automatically once you set the ignition switch to "LOCK" and then to "START".

■ If you press the Stop & Start system off button while the vehicle is stopped

  • When the engine has been stopped by the Stop & Start system, pressing the Stop & Start system off button causes the engine to restart.

    From the next time the vehicle stops (once the Stop & Start system is off), the engine will not stop.

  • If you press the Stop & Start system off button while the Stop & Start system is inactive, the system turns back on but the engine does not stop.

    At the next stop of the vehicle (once the Stop & Start system is on), the engine will stop.

■ Operating conditions

  • The Stop & Start system operates when all of the following conditions are met:
    • The windshield defogger is off.
    • The driver's seat belt is fastened.
    • The engine is sufficiently warmed up.
    • The driver's door is closed.
    • The clutch pedal is not depressed.
    • The outside temperature is above -5 °C (23 °F).
    • The shift lever is in N.
    • The hood is closed.
  • In the following situations, the engine may not be stopped by the Stop & Start system. This does not indicate a malfunction of the Stop & Start system.
    • You are using the air conditioning system when the outside temperature is very high or very low.
    • The battery is not sufficiently charged, such as when the vehicle has been parked for a long time and the battery has discharged, the electrical load is high, the battery is extremely cold or its condition has deteriorated, or it is being periodically recharged.
    • The vacuum level in the brake booster is low.
    • You are turning the steering wheel.
    • Traffic or other conditions require the vehicle to stop repeatedly.
    • The vehicle is being driven at high altitude.
    • The engine coolant or transmission fluid temperature is extremely low or high.
    • The battery electrolyte temperature is extremely low or high.
    • For a few minutes after the battery terminals have been disconnected and reconnected.
    • For a few minutes after the battery has been replaced.
  • In the following situations, the engine restarts automatically if it was stopped by the Stop & Start system. (For the engine to be stopped by the Stop & Start system, the vehicle must be driven first.)
    • The air conditioning system is operating.
    • The windshield defogger is operating.
    • You are turning the steering wheel.
    • The driver's seat belt is unfastened.
    • The driver's door is open.
    • You press the Stop & Start system off button.
    • The vehicle begins to roll on a slope.
  • In the following situations, the engine may restart automatically if it was stopped by the Stop & Start system. (For the engine to be stopped by the Stop & Start system, the vehicle must be driven first.)
    • You pump or depress the brake pedal very forcefully.
    • You are using the air conditioning system.
    • The battery is not sufficiently charged.

■ Hood

  • Even if you open the hood while the engine is stopped by the Stop & Start system, the engine stalls and cannot be restarted by the automatic restart function. In this case, restart the engine using the normal starting procedure.
  • If you close the hood after starting the engine with the hood open, the Stop & Start system does not operate. Close the hood, stop the engine, wait at least 30 seconds, then start the engine again.

■ When to use the Stop & Start system

  • If you move the shift lever to a position other than P with the clutch pedal released while the engine is stopped by the Stop & Start system, a warning beep sounds and the Stop & Start indicator flashes. This indicates that the engine has only been stopped by the Stop & Start system, not switched off completely.
  • When the system is inoperative, inactive or malfunctioning, the driver is informed by warning messages and a warning buzzer.
  • When the engine is restarted by the Stop & Start system, the power outlet may temporarily be unusable. This does not indicate a malfunction.
  • Installing and removing electrical equipment and wireless devices may affect the Stop & Start system. For more details, contact a Toyota dealer, an authorized Toyota repairer, or any reliable repairer.

■ If the windshield fogs up while the engine is stopped by the Stop & Start system Turn on the windshield defogger. (The engine restarts automatically.)

If the windshield often fogs up, press the Stop & Start off switch to turn off the system.

■ If an odor comes from the air conditioning system while the engine is stopped by the Stop & Start system Press the Stop & Start off switch to turn off the Stop & Start system.

■ Operation of the air conditioning system while the engine is stopped by the Stop & Start system

  • If you use the air conditioning system in automatic mode, the blower fan speed may decrease or the blower may stop completely while the engine is stopped by the Stop & Start system, in order to limit temperature variations in the cabin.
  • To make sure the air conditioning system will operate while the vehicle is stopped, turn off the Stop & Start system by pressing the Stop & Start off switch.

■ Setting the idling stop time with the air conditioning system on You can set the length of time the Stop & Start system remains active while the air conditioning system is on, by following the procedure described below.

(It is not possible to set the length of time the Stop & Start system remains active while the air conditioning system is off.)

  • Setting up via the multi-information display

1. Use the instrument cluster selector to select "Toyota CH-R. Utilisation des systèmes d'aide à la conduiteSetup" and pressToyota CH-R. Utilisation des systèmes d'aide à la conduite .

2. Select the desired option and pressToyota CH-R. Utilisation des systèmes d'aide à la conduite.

Toyota CH-R. Utilisation des systèmes d'aide à la conduite
  • Setting via the Stop & Start off switch
    Each time you press and hold the Stop & Start off switch for more than 3 seconds, the system switches between the standard and extended time.

    You can check the system status in the settings display on the multi-information display.

■ Stop & Start system protection function

  • If the audio system produces excessive volume, it may be automatically shut off to reduce battery consumption. If this happens, turn the start switch off, wait at least 3 seconds, then turn it to "ACC" or "ON" to reactivate the audio system.
  • The audio system may not reactivate if the battery terminals have been disconnected and reconnected. If this happens, turn the start switch off and perform the following action twice to reactivate the audio system normally.
    • Turn the start switch to "ON", then to OFF.

■ Replacing the battery

■ Checking the Stop & Start system status

■ Messages on the multi-information display In the following situations,Toyota CH-R. Utilisation des systèmes d'aide à la conduiteand a message will appear on the multi-information display.

  • When the engine cannot be stopped by the Stop & Start system
Message Explanation
Toyota CH-R. Utilisation des systèmes d'aide à la conduite"For A/C system.

"

  • You are using the air conditioning system while the outside temperature is high or low.

    If the difference between the set temperature and the cabin temperature is small, the system is active.

  • Toyota CH-R. Utilisation des systèmes d'aide à la conduiteis active.
Toyota CH-R. Utilisation des systèmes d'aide à la conduite"Battery charging."
  • The battery may be under-charged.

    Engine stop is temporarily prohibited to give priority to recharging the battery. However, if the engine has been running for some time, stopping is allowed.

  • A maintenance charge may be in progress, which is a periodic charge lasting a few minutes after the battery terminals have been disconnected and reconnected, or after the battery has been replaced, etc.

    After a maintenance charge of approximately 5 to 60 minutes, the system is operational.

If the message is displayed continuously (more than 60 seconds), the battery condition may be degraded. Contact a Toyota dealer, an authorized Toyota repairer, or any reliable repairer.

Toyota CH-R. Utilisation des systèmes d'aide à la conduite"For brake system."
  • The vehicle is being driven at high altitude.
  • The vacuum level in the brake booster is low.

When the vacuum level in the brake booster reaches a predefined value, the system is active.

Toyota CH-R. Utilisation des systèmes d'aide à la conduite"Steering wheel turned." You have turned the steering wheel.
Toyota CH-R. Utilisation des systèmes d'aide à la conduite"Hood open" You have opened the hood.
Toyota CH-R. Utilisation des systèmes d'aide à la conduite"Driver's seat belt not fastened." The driver's seat belt is not fastened.
Toyota CH-R. Utilisation des systèmes d'aide à la conduite"Stop & Start unavailable"
  • The Stop & Start system is temporarily deactivated.

    Engine has been running for some time.

  • The engine may have been started with the hood open.

Close the hood, stop the engine, wait at least 30 seconds, then restart the engine.

Toyota CH-R. Utilisation des systèmes d'aide à la conduite"System temp. low" The battery may be cold. Running the engine for a while allows the system to recover as the temperature in the engine compartment rises.
Toyota CH-R. Utilisation des systèmes d'aide à la conduite"System temp. high" The battery may be extremely hot. If the engine compartment is allowed to cool sufficiently, the system will recover.
Toyota CH-R. Utilisation des systèmes d'aide à la conduite"Battery not approved." A battery that is not compatible with the Stop & Start system may have been installed. The Stop & Start system does not operate. Have the vehicle inspected by a Toyota dealer, a Toyota-approved repairer, or any reliable repairer.
Toyota CH-R. Utilisation des systèmes d'aide à la conduite"For A/C system.

"

  • You have turned on or are using the air conditioning system.
  • Toyota CH-R. Utilisation des systèmes d'aide à la conduitehas been switched on.
Toyota CH-R. Utilisation des systèmes d'aide à la conduite"Battery charging." The battery may be undercharged. The engine is restarted to give priority to recharging the battery. Running the engine for a while allows the system to recover.
Toyota CH-R. Utilisation des systèmes d'aide à la conduite"For brake system." You have kept depressing the brake pedal, or have pumped it. The system becomes active again once the engine has started running and the vacuum in the brake booster has reached a predefined level.
Toyota CH-R. Utilisation des systèmes d'aide à la conduite"Steering wheel turned." You have turned the steering wheel.
Toyota CH-R. Utilisation des systèmes d'aide à la conduite"Driver's seat belt not fastened." You have unfastened the driver's seat belt.
Toyota CH-R. Utilisation des systèmes d'aide à la conduite"Stop & Start system active. Shift to N and depress the clutch pedal to restart." You have moved the shift lever to a position other than N without depressing the clutch pedal. To restart the engine, move the shift lever to N, then depress the clutch pedal.

■ If the message "Stop & Start system malfunction. See your dealer." is shown on the multi-information display The system may be malfunctioning. Have the vehicle inspected by a Toyota dealer, a Toyota-approved repairer, or any reliable repairer.

■ If the Stop & Start system off indicator continues to flash The system may be malfunctioning. Have the vehicle inspected by a Toyota dealer, a Toyota-approved repairer, or any reliable repairer.

WARNING

■ When the Stop & Start system is operating

  • Keep the shift lever in N and depress the brake pedal or set the parking brake while the engine is stopped by the Stop & Start system (while the Stop & Start indicator is on).
  • Do not allow a passenger to leave the vehicle while the engine is stopped by the Stop & Start system (while the Stop & Start indicator is on).

    An accident could occur due to the engine's automatic restart function.

  • If the vehicle is in a poorly ventilated area, make sure the engine is not stopped by the Stop & Start system. The engine could restart automatically, causing exhaust gases to build up and enter the vehicle, which could result in serious health problems or death.
NOTE

■ To ensure proper operation of the system If any of the following situations occur, the Stop & Start system may not operate properly. Have your vehicle inspected by a Toyota dealer, a Toyota-approved repairer, or any reliable repairer.

  • While the driver's seat belt is fastened, the driver and front passenger seat belt reminder light flashes.
  • Even though the driver's seat belt is not fastened, the driver and front passenger seat belt reminder light does not come on.
  • Even though the driver's door is closed, the door open warning is shown on the multi-information display, or the interior light is on while the interior light switch is in the door-open linked position.
  • Even though the driver's door is open, the door open warning is not shown on the multi-information display, or the interior light does not come on while the interior light switch is in the door-open linked position.

■ When the engine has stalled If the system is functioning, immediately depress the clutch pedal so the engine can restart.