Toyota Sienna Quiz
Navigation

CD Sound Skips

In this manual: Navigation
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
4steps
~24min
2/5difficulty
Done 0 of 4

INSPECTION PROCEDURE

1 CHECK CD

CHECK CD
  1. Check the CD.

OK: The CD is clean.

HINT: If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

NOTICE: Do not use a conventional record cleaner or antistatic preservative.

2 CHECK CD

CHECK CD
  1. Check that the CD is not deformed or cracked.

OK: No deformation or cracks on the CD.

3 CHECK OPERATION ANOTHER CD

  1. Check using another CD.
  2. Check if the problem recurs using another CD.

OK: The problem does not occur

4 CHECK RADIO AND NAVIGATION ASSEMBLY

  1. Check the radio and navigation assembly installation condition.
  2. Check that the radio and navigation assembly is properly installed.

OK: Radio and navigation assembly is properly installed.

REPLACE RADIO AND NAVIGATION ASSEMBLY

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.