Toyota Sienna Quiz
Navigation

Gyro Error

In this manual: Navigation
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
2steps
~12min
1/5difficulty
Done 0 of 2

DTC 58-10 Gyro Error

DTC 80-10 Gyro Error

DESCRIPTION

DTC No.

DTC Detection Condition

Trouble Area
58-10 Ground short, power supply short, or open circuit in the gyro signal
  • Gyro sensor
  • Radio and navigation assembly
80-10 Ground short, power supply short, or open circuit in the gyro signal

INSPECTION PROCEDURE

HINT: After the inspection is completed, clear the DTCs.

1 CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)

CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)
  1. Enter the "Navigation Check" mode (Vehicle Sensors).
  2. Check the gyro voltage.

Standard voltage: 0.1 to 4.5 V

2 CLEAR DTC

  1. Clear the DTCs

3 RECHECK DTC

  1. Recheck for DTCs and check if the same trouble occurs again.

HINT: If DTCs are detected frequently, replace the radio and navigation assembly.

OK: Malfunction disappears

END

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.