Toyota Sienna Quiz
Navigation

Display does not Dim when Light Control Switch is Turned ON

In this manual: Navigation
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
5steps
~30min
2/5difficulty
Done 0 of 5

INSPECTION PROCEDURE

1 CHECK IMAGE QUALITY SETTING

CHECK IMAGE QUALITY SETTING
  1. Enter the display adjustment screen by pressing the "DISPLAY" switch.
  2. Turn the light control switch to the TAIL position.
  3. Check if "DAY MODE" on the display adjustment is ON.

OK: "DAY MODE" is ON.

TURN "DAY MODE" SETTING OFF

2 CHECK VEHICLE SIGNAL (DISPLAY CHECK MODE)

CHECK VEHICLE SIGNAL (DISPLAY CHECK MODE)
  1. Enter the "Display Check" mode (Vehicle Signal Check).
  2. Check that the display changes between ON and OFF according to the light control switch operation.

OK

OK

HINT: The display is updated once per second. It is normal for the display to lag behind the actual switch operation.

REPLACE RADIO AND NAVIGATION ASSEMBLY

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.