Navigation
Wrong Disc/ Disc cannot be Read
In this manual: Navigation
6steps
~36min
2/5difficulty
Done 0 of 6
DTC 44-41 Wrong Disc
DTC 44-42 Disc cannot be Read
DESCRIPTION
DTC No. |
DTC Detection Condition |
Trouble Area |
| 44-41 | An unsuitable disc is inserted |
|
| 44-42 | The disc cannot be read. |
INSPECTION PROCEDURE
HINT: After the inspection is completed, clear the DTCs
1 CHECK DISC

- Check that the disc is not deformed or cracked.
OK: No deformation or cracks on the disc.
2 DISC CLEANING

- Disc cleaning
- If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
NOTICE: Do not use a conventional record cleaner or antistatic preservative.
3 CLEAR DTC
- Clear the DTC
4 RECHECK DTC
- Recheck DTCs and check if the same trouble occurs again.
OK: Malfunction disappears
5 REPLACE DISC WITH ANOTHER AND RECHECK
- Replace the disc with another and recheck.
- Replace the disc with another normal one.
- Clear the DTCs.
- Recheck for DTCs and check if the same trouble occurs again.
OK: Malfunction disappears.
END
Test yourself
A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?