Screen Flicker or Color Distortion

INSPECTION PROCEDURE

1 CHECK DISPLAY SETTING

1. 1
   Enter the display adjustment screen by pressing the "DISPLAY" switch.
2. 2
   Reset display settings (contrast, brightness) and check that the screen appears normal

   

3. 3
   Press the "INFO" switch and then select "Screen Setting."

   

4. 4
   Set the "Switch Color" to "Green" (initial setting) and check if the display returns to normal.

OK: Returns to normal.

END

2 CHECK CABIN

1. Check that the cabin temperature is warmer than -20C (-4.0F).

OK: Cabin is warmer than -20C (-4.0F).

3 CHECK COLOR BAR (DISPLAY CHECK MODE)

1. 1
   Enter the "Display Check" mode (Color Bar Check).
2. 2
   Check that the color bars match the displayed names.

OK: Color bars match the displayed names.

4 CHECK NAVI COLOR BAR (NAVIGATION CHECK MODE)

1. 1
   Enter the "Navigation Check" mode (NAVI Color Bar Check).
2. 2
   Check that the color bars match the displayed names.

OK: Color bars match the displayed names.

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE