Interior equipment. Compartments & covers

In this manual: Interior equipment. Compartments & covers
Technical data. Panel gaps - front — 1Body front. Lock carrier — 1Body front. Wings — 1Body front. Bulkhead — 1Bonnet, flaps, cab, central locking. Bonnet — 1Bonnet, flaps, cab, central locking. Rear lid — 1Bonnet, flaps, cab, central locking. Charging flap unit — 1Front door, central locking. Door — 1Front door, central locking. Door components — 1Front door, central locking. Central locking — 1Rear door,sliding door,wing doors,central locking. Door — 1Rear door,sliding door,wing doors,central locking. Door components — 1Sliding roof. Sliding sunroof — 1Bumper. Bumper, front — 1Bumper. Bumper, rear — 1Glazing & window mechanism. Repair notes — 1Glazing & window mechanism. Windscreen — 1Glazing & window mechanism. Rear windscreen — 1Glazing & window mechanism. Side windows — 1Glazing & window mechanism. Door windows — 1Exterior equipment. Spoiler — 1Exterior equipment. Mouldings, trims, extensions — 1Exterior equipment. Underbody cladding — 1Exterior equipment. Roof moulding and roof railing — 1Exterior equipment. Exterior mirror — 1Exterior equipment. Wheel housing liner — 1Exterior equipment. Lettering and emblems — 1Exterior equipment. Bicycle carrier — 1Exterior equipment. Trim film and protective film — 1Interior equipment. Compartments & covers — 1Interior equipment. Equipment — 1Interior equipment. Centre console — 1Interior equipment. Front centre armrest — 1Interior equipment. Interior mirror — 1Passenger protection. Seat belts — 1Passenger protection. Child seat anchors — 1Passenger protection. Airbag system — 1Passenger protection. Airbag control unit — 1Passenger protection. Front airbag, driver side — 1Passenger protection. Front passenger airbag — 1Passenger protection. Side airbags — 1Passenger protection. Curtain airbags — 1Passenger protection. Airbag crash sensors — 1Passenger protection. Seat occupied recognition — 1Trim, noise insulation. Front door trims — 1Trim, noise insulation. Rear door trims — 1Trim, noise insulation. Dash panel — 1Trim, noise insulation. Central tube for dash panel — 1Trim, noise insulation. Interior trims — 1Trim, noise insulation. Roof trims — 1Trim, noise insulation. Luggage compartment trims — 1Seat frames. Overview of seat variants — 1Seat frames. Front seats — 1Seat frames. Rear seats — 1Seat padding, covers. Front seat covers and padding — 1Seat padding, covers. Rear seat covers and padding — 1Vehicle-specific paintwork information. Explanation of symbols — 1Vehicle-specific paintwork information. Paintwork structure — 1Vehicle-specific paintwork information. Areas exposed to stone chipping — 1Vehicle-specific paintwork information. Masked sectors — 1Vehicle-specific paintwork information. Seam sealing — 1Vehicle-specific paintwork information. Underseal — 1Vehicle-specific paintwork information. Cavity sealing — 1Vehicle-specific paintwork information. Contrasting colours — 1Vehicle-specific paintwork information. Paintwork repair — 1Technical data. Acoustic considerations during vehicle development — 1Technical data. General procedure for identifying noises — 1Technical data. Volkswagen equipment for localising noises — 1Technical data. Borescope VAS 6748A — 1Technical data. Causes — 1Technical data. Locating water ingress — 1Technical data. Attachments — 1Technical data. Vehicle identification data — 1Technical data. Safety information — 1Technical data. Body parts and materials — 1Technical data. Alignment jig — 1Body front. Longitudinal member cross panel — 1Body front. Longitudinal member — 1Body front. Front wheel housing — 1Body centre, roof, frame. Roof — 1Body centre, roof, frame. A-pillar — 1Body centre, roof, frame. B-pillar — 1Body centre, roof, frame. Side member — 1Body, rear. Rear cross member — 1Body, rear. Rear cross panel — 1Body, rear. Luggage compartment floor — 1Body, rear. Rear longitudinal member — 1Body, rear. Side panel — 1Body, rear. Rear wheel housing — 1General information, Body. Basic information on body repairs — 1General information, Body. Explanation of symbols — 1General information, Body. Overview of materials used — 1General information, Body. Joining and separating techniques — 1General information, Body. Surface repair — 1General information, Body. Corrosion protection — 1General information, Body. Noise insulation — 1General information, Body. Plastic repair — 1General information, Body. Welding plastic attachments — 1General information, Body. General notes – windows — 1General information, Body. Glass repair — 1General information, Body. Use of adhesives — 1General information, Body. Self-adhesive components — 1General information, Body. Noises — 1General information, Body. Preparing for disposal — 1General information, Body. Leaks — 1General information, paint. Safety information — 1General information, paint. General information — 1Genuine products. Filler — 1Genuine products. Priming metal — 1Genuine products. Priming plastic materials — 1Genuine products. Surfacer — 1Genuine products. 2-pack top coats — 1Repair painting work. Paint finish – decorative strips and films — 1Repair painting work. Tips and tricks — 1Air conditioner. Overview of fitting locations — 1Air conditioner. Refrigerant circuit — 1Air conditioner. Valve unit of heat pump — 1Air conditioner. Air conditioner compressor — 1Air conditioner. Control motors — 1Air conditioner. Front heater and air conditioning unit — 1Air conditioner. Air duct — 1Air conditioner. Coolant circuit — 1Air conditioner. Other controlling and regulating components — 1Air conditioner. Air quality improvement system — 11-speed gearbox 0MH, rear, EQ310. Technical data — 11-speed gearbox 0MH, rear, EQ310. Gearbox mechanics,operation, construction,diff — 11-speed gearbox 0MH, rear, EQ310. Final drive, differential, differential lock — 1General information. High voltage — 1Electric drive EIP220, EIA200, EIA210. Technical data — 1Electric drive EIP220, EIA200, EIA210. Engine assy,cylinder block,crankcase — 1Electric drive EIP220, EIA200, EIA210. Engine cooling — 1Electric drive. High-voltage components, charging unit and voltage converter — 1Electric drive. Warning stickers — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing without wax — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing with wax — 1Electric drive. Power and control electronics for electric drive — 1Electric drive. Electric drive motor — 1Electric drive. Motor control unit — 1Electric drive. De-energising high-voltage system — 1Electric drive. Re-energise high-voltage system — 1Electric drive. Potential equalisation lines — 1Electric drive. Charging socket, with charging cable — 1Electric drive. Charging socket, with separate charging cable — 1Electric drive. Charging unit for high-voltage battery — 1Electric drive. Charging unit for high-voltage battery, with integrated voltage converter — 1Electric drive. Vehicle noise & engine sound — 1Electric drive. Accelerator pedal — 1Electric drive. Voltage converter — 1Electric drive. High-voltage cables, all-wheel drive — 1Electric drive. High-voltage cables, rear-wheel drive — 1Front suspension, drive shafts. Front axle — 1Front suspension, drive shafts. Subframe — 1Front suspension, drive shafts. Suspension strut, upper suspension link — 1Front suspension, drive shafts. Lower suspension link, swivel joint — 1Front suspension, drive shafts. Wheel bearing — 1Front suspension, drive shafts. Anti-roll bar — 1Rear suspension, drive shaft. Rear axle — 1Rear suspension, drive shaft. Subframe — 1Rear suspension, drive shaft. Anti-roll bar — 1Rear suspension, drive shaft. Suspension link, track rod — 1Rear suspension, drive shaft. Suspension strut, shock absorber, spring — 1Rear suspension, drive shaft. Wheel bearing assembly, trailing arm — 1Rear suspension, drive shaft. Drive shaft — 1Self-levelling air spring system. Electronically controlled damping — 1Self-levelling air spring system. Vehicle level sender — 1Wheels, tyres. axle align. Wheel alignment — 1Wheels, tyres. axle align. Wheels, tyres — 1Steering. Steering wheel — 1Steering. Steering column — 1Steering. Steering rack — 1Brake system. Technical data — 1ABS, ADR, TCS, EDL, ESP. Overview of fitting locations — 1ABS, ADR, TCS, EDL, ESP. Control unit and hydraulic unit — 1ABS, ADR, TCS, EDL, ESP. Sensors — 1Brake, brake mechanics. Front brake — 1Brake, brake mechanics. Rear brake — 1Brake, brake mechanics. Parking brake — 1Brake, brake mechanics. Brake pedal — 1Brakes, hydraulics, regulator, servo. Brake servo and brake master cylinder — 1Brakes, hydraulics, regulator, servo. Hydraulic system — 1Wheels and Tyres Guide. Wheels, tyres. axle align — 1Wheels, tyres. axle align. Instructions on using the guide — 1Wheels, tyres. axle align. Legislative and technical conditions — 1Wheels, tyres. axle align. Wheel change — 1Wheels, tyres. axle align. Fitting tyre — 1Wheels, tyres. axle align. Wheel bolts — 1Wheels, tyres. axle align. Information on tyres — 1Wheels, tyres. axle align. Handling problems — 1Wheels, tyres. axle align. Evaluating tyres — 1Wheels, tyres. axle align. Tyre wear — 1Starter-current supply-CC. Battery — 1Instruments, GCI. Dash panel insert — 1Instruments, GCI. Horn — 1Windscreen wipewash system. Windscreen wiper system — 1Windscreen wipewash system. Windscreen washer system — 1Windscreen wipewash system. Rear window wiper system — 1Windscreen wipewash system. Rear window washer system — 1Lights, lamps, switches outside. LED headlight — 1Lights, lamps, switches outside. LED matrix headlight — 1Lights, lamps, switches outside. Tail lights — 1Lights, lamps, switches outside. Lights in exterior mirror — 1Lights, lamps, switches outside. Number plate light — 1Lights, lamps, switches outside. Entry and start authorisation system — 1Lights, lamps, switches outside. Steering column switch module — 1Lights, lamps, switches outside. Towing bracket — 1Lights, lamps, switches inside, anti-theft system. Lights — 1Lights, lamps, switches inside, anti-theft system. Controls — 1Lights, lamps, switches inside, anti-theft system. Anti-theft alarm system — 1Lights, lamps, switches inside, anti-theft system. Cigarette lighter, socket — 1Wiring. Relay carriers, fuse holders, electronics boxes — 1Wiring. Control units — 1Infotainment. Componentscontrol units — 1Infotainment. Multifunction steering wheel — 1Driver assist systems. Senders, sensors, control units — 1Driver assist systems. Adaptive cruise control — 1Driver assist systems. Reversing camera system — 1Driver assist systems. Front camera for driver assist systems — 1Driver assist systems. Overhead view camera — 1Electrical system. Starter-current supply-CC — 1Electrical system. Windscreen wipe and wash system — 1Wiring. Wires and lines — 1
~10min read
010203040501.51N·mlb·ft
Tightening torque found on this page
  • Overview of fitting locations - storage compartments/covers/trim panels
  • Assembly overview – dash panel trim on driver side, left-hand drive vehicles
  • Assembly overview - dash panel trim on front passenger side
  • Assembly overview - steering column trim
  • Assembly overview - glove compartment
  • Removing and installing dash panel trim on driver side, left-hand drive vehicles
  • Removing and installing dash panel trim on driver side, right-hand drive vehicles
  • Removing and installing gap cover for dash panel insert
  • Removing and installing dash panel cover (passenger side)
  • Removing and installing upper steering column trim
  • Removing and installing lower steering column trim
  • Removing and installing glove compartment opener
  • Removing and installing glove compartment cover
  • Removing and installing restrictor for glove compartment
  • Service position of glove compartment
  • Removing and installing information electronics cover

Overview of fitting locations - storage compartments/covers/trim panels

Overview of fitting locations - storage compartments/covers/trim panels

Overview is shown for left-hand drive vehicle as an example

1 - Cover for dash panel/head-up display

❏ → Rep. gr.70; Removing and installing cover for dash panel/head-up display

2 - Loudspeaker trim

❏ → Rep. gr.70; Removing and installing loudspeaker trim

3 - Dash panel

❏ → Rep. gr.70; Assembly overview - dash panel

❏ → Rep. gr.70; Removing and installing dash panel

4 - Glove compartment cover

❏ → Rep. gr.68; Assembly overview - glove compartment

❏ → Rep. gr.68; Removing and installing glove compartment cover

5 - Dash panel trim on front passenger side

❏ → Rep. gr.68; Removing and installing dash panel cover (passenger side)

6 - Centre console

❏ → Rep. gr.68; Assembly overview - centre console

❏ → Rep. gr.68; Removing and installing centre console

7 - Tunnel support cover

❏ → Rep. gr.70; Removing and installing tunnel support cover

8 - Steering column trim

❏ → Rep. gr.68; Assembly overview - steering column trim

9 - Dash panel cover on driver side

❏ → Rep. gr.68; Assembly overview - dash panel cover (driver side)

❏ → Rep. gr.68; Removing and installing dash panel cover on driver side

Assembly overview – dash panel trim on driver side, left-hand drive vehicles

Assembly overview – dash panel trim on driver side, left-hand drive vehicles

1 - Dash panel end cover

❏ → Rep. gr.70; Removing and installing dash panel end cover

2 - Retaining clip

❏ Qty. 5

3 - Dash panel trim on driver side

❏ → Rep. gr.68; Removing and installing dash panel trim on driver side, left-hand drive vehicles

4 - Bolt

❏ Qty. 3

❏ 1,5 N·m

5 - Fuse box cover

Assembly overview - dash panel trim on front passenger side

Assembly overview - dash panel trim on front passenger side

The overview shows a left-hand drive vehicle as an example. For right-hand drive vehicles, the layout is a mirror image.

1 - Dash panel trim on front passenger side

❏ → Rep. gr.68; Removing and installing dash panel trim on front passenger side

2 - Dash panel end cover

❏ → Rep. gr.70; Removing and installing dash panel end cover

3 - Bolt

❏ Qty. 7

❏ → Fig.

4 - Bolt

❏ Depending on equipment/version

❏ → Fig.

Specified torque and tightening sequence

BoltsSpecified torque-1- to -7-1.5 Nm-8- depending on equipment/version1.5 N·m

Assembly overview - steering column trim

Assembly overview - steering column trim

The overview shows a left-hand drive vehicle as an example.

1 - Gap cover for dash panel insert

❏ → Rep. gr.68; Removing and installing gap cover for dash panel insert

2 - Upper steering column trim

❏ → Rep. gr.68; Removing and installing upper steering column trim

3 - Lower steering column trim

❏ → Rep. gr.68; Removing and installing lower steering column trim

4 - Bolt

❏ 2,5 N·m

5 - Steering column electronics control unit -J527-

❏ → Electrical system; Rep. gr.94; Steering column switch module; Removing and installing steering column electronics control unit [J527]

Assembly overview - glove compartment

Assembly overview - glove compartment

Overview is shown for left-hand drive vehicle as an example

1 - Bolt

❏ Qty. 2

❏ 1,5 N·m

2 - Glove compartment cover

❏ → Rep. gr.68; Removing and installing glove compartment cover

3 - Glove compartment cover

❏ → Rep. gr.68; Removing and installing glove compartment cover

❏ → Rep. gr.68; Service position of glove compartment

4 - Restrictor in glove compartment

❏ → Rep. gr.68; Removing and installing restrictor for glove compartment

Removing and installing dash panel trim on driver side, left-hand drive vehicles

Removing and installing dash panel trim on driver side, left-hand drive vehicles

Removing

– Remove dash panel end cover on driver side → Rep. gr.70; Removing and installing dash panel end cover.

– Unclip fuse box cover -1- in bottom area and pull out downwards from dash panel trim on driver side -2-.

– Unscrew bolts -1- from dash panel trim on driver side -2-.

– Remove side clips -1- using commercially available plastic wedge.

– Remove dash panel trim on driver side -2-.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.68; Assembly overview – dash panel trim on driver side, left-hand drive vehicles

Removing and installing dash panel trim on driver side, right-hand drive vehicles

Removing and installing dash panel trim on driver side, right-hand drive vehicles

Removing

– Remove dash panel end cover on driver side → Rep. gr.70; Removing and installing dash panel end cover.

– Remove side clips using commercially available plastic wedge.

– Unclip dash panel trim on driver side -1- from mountings in base -2-.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.68; Assembly overview – dash panel trim on driver side, right-hand drive vehicles

Removing and installing gap cover for dash panel insert

Removing and installing gap cover for dash panel insert

Removal and installation are described for a left-hand drive vehicle as an example.

Removing

– Pull out steering wheel as far as possible, and move it to lowest position. Use the full range of the steering column adjustment for this purpose.

– Use a commercially available plastic wedge to unclip front trim of dash panel insert gap cover -1-.

– Unclip dash panel insert gap cover -1- upwards using commercially available plastic wedge.

Installing

Install in reverse order.

Removing and installing dash panel cover (passenger side)

Removing and installing dash panel cover (passenger side)

Removal and installation are described for a left-hand drive vehicle as an example.

– Remove dash panel end cover → Rep. gr.70; Removing and installing dash panel end cover.

– Remove dash panel trim on driver side → Rep. gr.68; Removing and installing dash panel trim on driver side.

– Remove centre vent → Rep. gr.70; Removing and installing steering centre vent.

– Remove tunnel support cover → Rep. gr.70; Removing and installing tunnel support cover.

Left-hand drive vehicles

– Remove glove compartment cover → Rep. gr.68; Removing and installing glove compartment cover.

All vehicles (continued)

Right-hand drive vehicles

– Remove glove compartment cover → Rep. gr.68; Removing and installing glove compartment cover.

– Unscrew bolt -2- from dash panel trim on front passenger side -1-.

All vehicles (continued)

– Unscrew bolts -2- from dash panel trim on front passenger side -1-.

– Remove dash panel trim on front passenger side -1-.

– Separate electrical connector.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.68; Assembly overview - dash panel cover (passenger side)

Removing and installing upper steering column trim

Removing and installing upper steering column trim

Removal and installation are described for a left-hand drive vehicle as an example.

Removing

– Remove steering wheel → Running gear, axles, steering; Rep. gr.48; Steering wheel; Removing and installing steering wheel.

– Using commercially available plastic wedge, lever upper steering column trim -2- in direction of -arrow- off steering column electronics control unit -J527--1-.

Installing

Install in reverse sequence of removal.

Removing and installing lower steering column trim

Removing and installing lower steering column trim

Removal and installation are described for a left-hand drive vehicle as an example.

Removing

– Remove upper steering column trim → Rep. gr.68; Removing and installing upper steering column trim.

– Unscrew bolt -2-.

– Swing lower steering column trim -1- in direction of -arrow A-, and unclip it.

– Disconnect electrical connector.

– Remove lower steering column trim -1- in direction of -arrow B-.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.68; Assembly overview - steering column trim

Removing and installing glove compartment opener

Removing and installing glove compartment opener

The glove compartment opening mechanism is clipped onto the rear of the dash panel trim on the front passenger side.

Removing

– Remove dash panel trim on front passenger side → Rep. gr.68; Removing and installing dash panel trim on front passenger side.

– Press retaining tabs -2- in direction of arrows -A and B-.

– Guide out glove box opening mechanism -1- from dash panel trim on front passenger side -3-.

Installing

Install in reverse order.

Removing and installing glove compartment cover

Removing and installing glove compartment cover

Removal and installation are described for a left-hand drive vehicle as an example.

Removing

– Bring glove compartment cover to service position → Rep. gr.68; Glove compartment, service position.

– Unclip glove compartment cover -1- from mountings -3- of dash panel cover on front passenger side -2-.

Installing

Install in reverse order.

Removing and installing restrictor for glove compartment

Removing and installing restrictor for glove compartment

Removal and installation are described for a left-hand drive vehicle as an example.

Removing

– Bring glove compartment cover to service position → Rep. gr.68; Glove compartment, service position.

– If fitted, disconnect electrical connector -3-.

– Turn restrictor -2- in direction of -arrow- in mounting of glove compartment on front passenger side -1-, and remove it.

Installing

Install in reverse order.

Service position of glove compartment

Service position of glove compartment

Moving to service position

Removal and installation are described for a left-hand drive vehicle as an example.

– Open glove compartment cover -2-.

– Push stops -1- from glove compartment cover -2- in direction of -arrow a-.

On right-hand drive vehicles, stops are located on side of glove compartment cover and must be pressed outwards for removal.

– Fold out glove compartment cover -2- as far as stop in direction of -arrow b-.

– Unclip push rod from restrictor at side of glove compartment cover -2-.

Moving from service position

– Clip in push rod of restrictor at side on glove compartment cover, and slowly close glove compartment cover until it is heard to engage.

Removing and installing information electronics cover

Removing and installing information electronics cover

Removing

– Use commercially available plastic wedge to unclip information electronics cover -arrows-.

Installing

Install in reverse order.