Instruments, GCI. Horn
In this manual: Instruments, GCI. Horn
~1min read
- Assembly overview – horn
- Removing and installing horn or dual tone horn [H1]
Assembly overview – horn
Assembly overview – horn

1 - Horn or dual tone horn -H1-
❏ → Rep. gr.90; Removing and installing horn or dual tone horn [H1]
2 - Nut
❏ 14 N·m
3 - Electrical connector
4 - Bolt
❏ 6 N·m
5 - Bracket for horn or dual tone horn -H1-
Removing and installing horn or dual tone horn [H1]
Removing and installing horn or dual tone horn [H1]
The horn or dual tone horn -H1- will henceforth be referred to as “horn”.
Removing
– Remove front right wheel housing liner → General body repairs, exterior; Rep. gr.66; Wheel housing liner; Removing and installing front wheel housing liner.
– Disconnect connector -2-.
– Unscrew bolt -3-.
– Remove horn -1-.

Installing
Install in the reverse order of removal, observing the following:
Tightening torques
♦ → Rep. gr.90; Assembly overview – horn
Was this page helpful?