Trim, noise insulation. Roof trims

In this manual: Trim, noise insulation. Roof trims
Technical data. Panel gaps - front — 1Body front. Lock carrier — 1Body front. Wings — 1Body front. Bulkhead — 1Bonnet, flaps, cab, central locking. Bonnet — 1Bonnet, flaps, cab, central locking. Rear lid — 1Bonnet, flaps, cab, central locking. Charging flap unit — 1Front door, central locking. Door — 1Front door, central locking. Door components — 1Front door, central locking. Central locking — 1Rear door,sliding door,wing doors,central locking. Door — 1Rear door,sliding door,wing doors,central locking. Door components — 1Sliding roof. Sliding sunroof — 1Bumper. Bumper, front — 1Bumper. Bumper, rear — 1Glazing & window mechanism. Repair notes — 1Glazing & window mechanism. Windscreen — 1Glazing & window mechanism. Rear windscreen — 1Glazing & window mechanism. Side windows — 1Glazing & window mechanism. Door windows — 1Exterior equipment. Spoiler — 1Exterior equipment. Mouldings, trims, extensions — 1Exterior equipment. Underbody cladding — 1Exterior equipment. Roof moulding and roof railing — 1Exterior equipment. Exterior mirror — 1Exterior equipment. Wheel housing liner — 1Exterior equipment. Lettering and emblems — 1Exterior equipment. Bicycle carrier — 1Exterior equipment. Trim film and protective film — 1Interior equipment. Compartments & covers — 1Interior equipment. Equipment — 1Interior equipment. Centre console — 1Interior equipment. Front centre armrest — 1Interior equipment. Interior mirror — 1Passenger protection. Seat belts — 1Passenger protection. Child seat anchors — 1Passenger protection. Airbag system — 1Passenger protection. Airbag control unit — 1Passenger protection. Front airbag, driver side — 1Passenger protection. Front passenger airbag — 1Passenger protection. Side airbags — 1Passenger protection. Curtain airbags — 1Passenger protection. Airbag crash sensors — 1Passenger protection. Seat occupied recognition — 1Trim, noise insulation. Front door trims — 1Trim, noise insulation. Rear door trims — 1Trim, noise insulation. Dash panel — 1Trim, noise insulation. Central tube for dash panel — 1Trim, noise insulation. Interior trims — 1Trim, noise insulation. Roof trims — 1Trim, noise insulation. Luggage compartment trims — 1Seat frames. Overview of seat variants — 1Seat frames. Front seats — 1Seat frames. Rear seats — 1Seat padding, covers. Front seat covers and padding — 1Seat padding, covers. Rear seat covers and padding — 1Vehicle-specific paintwork information. Explanation of symbols — 1Vehicle-specific paintwork information. Paintwork structure — 1Vehicle-specific paintwork information. Areas exposed to stone chipping — 1Vehicle-specific paintwork information. Masked sectors — 1Vehicle-specific paintwork information. Seam sealing — 1Vehicle-specific paintwork information. Underseal — 1Vehicle-specific paintwork information. Cavity sealing — 1Vehicle-specific paintwork information. Contrasting colours — 1Vehicle-specific paintwork information. Paintwork repair — 1Technical data. Acoustic considerations during vehicle development — 1Technical data. General procedure for identifying noises — 1Technical data. Volkswagen equipment for localising noises — 1Technical data. Borescope VAS 6748A — 1Technical data. Causes — 1Technical data. Locating water ingress — 1Technical data. Attachments — 1Technical data. Vehicle identification data — 1Technical data. Safety information — 1Technical data. Body parts and materials — 1Technical data. Alignment jig — 1Body front. Longitudinal member cross panel — 1Body front. Longitudinal member — 1Body front. Front wheel housing — 1Body centre, roof, frame. Roof — 1Body centre, roof, frame. A-pillar — 1Body centre, roof, frame. B-pillar — 1Body centre, roof, frame. Side member — 1Body, rear. Rear cross member — 1Body, rear. Rear cross panel — 1Body, rear. Luggage compartment floor — 1Body, rear. Rear longitudinal member — 1Body, rear. Side panel — 1Body, rear. Rear wheel housing — 1General information, Body. Basic information on body repairs — 1General information, Body. Explanation of symbols — 1General information, Body. Overview of materials used — 1General information, Body. Joining and separating techniques — 1General information, Body. Surface repair — 1General information, Body. Corrosion protection — 1General information, Body. Noise insulation — 1General information, Body. Plastic repair — 1General information, Body. Welding plastic attachments — 1General information, Body. General notes – windows — 1General information, Body. Glass repair — 1General information, Body. Use of adhesives — 1General information, Body. Self-adhesive components — 1General information, Body. Noises — 1General information, Body. Preparing for disposal — 1General information, Body. Leaks — 1General information, paint. Safety information — 1General information, paint. General information — 1Genuine products. Filler — 1Genuine products. Priming metal — 1Genuine products. Priming plastic materials — 1Genuine products. Surfacer — 1Genuine products. 2-pack top coats — 1Repair painting work. Paint finish – decorative strips and films — 1Repair painting work. Tips and tricks — 1Air conditioner. Overview of fitting locations — 1Air conditioner. Refrigerant circuit — 1Air conditioner. Valve unit of heat pump — 1Air conditioner. Air conditioner compressor — 1Air conditioner. Control motors — 1Air conditioner. Front heater and air conditioning unit — 1Air conditioner. Air duct — 1Air conditioner. Coolant circuit — 1Air conditioner. Other controlling and regulating components — 1Air conditioner. Air quality improvement system — 11-speed gearbox 0MH, rear, EQ310. Technical data — 11-speed gearbox 0MH, rear, EQ310. Gearbox mechanics,operation, construction,diff — 11-speed gearbox 0MH, rear, EQ310. Final drive, differential, differential lock — 1General information. High voltage — 1Electric drive EIP220, EIA200, EIA210. Technical data — 1Electric drive EIP220, EIA200, EIA210. Engine assy,cylinder block,crankcase — 1Electric drive EIP220, EIA200, EIA210. Engine cooling — 1Electric drive. High-voltage components, charging unit and voltage converter — 1Electric drive. Warning stickers — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing without wax — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing with wax — 1Electric drive. Power and control electronics for electric drive — 1Electric drive. Electric drive motor — 1Electric drive. Motor control unit — 1Electric drive. De-energising high-voltage system — 1Electric drive. Re-energise high-voltage system — 1Electric drive. Potential equalisation lines — 1Electric drive. Charging socket, with charging cable — 1Electric drive. Charging socket, with separate charging cable — 1Electric drive. Charging unit for high-voltage battery — 1Electric drive. Charging unit for high-voltage battery, with integrated voltage converter — 1Electric drive. Vehicle noise & engine sound — 1Electric drive. Accelerator pedal — 1Electric drive. Voltage converter — 1Electric drive. High-voltage cables, all-wheel drive — 1Electric drive. High-voltage cables, rear-wheel drive — 1Front suspension, drive shafts. Front axle — 1Front suspension, drive shafts. Subframe — 1Front suspension, drive shafts. Suspension strut, upper suspension link — 1Front suspension, drive shafts. Lower suspension link, swivel joint — 1Front suspension, drive shafts. Wheel bearing — 1Front suspension, drive shafts. Anti-roll bar — 1Rear suspension, drive shaft. Rear axle — 1Rear suspension, drive shaft. Subframe — 1Rear suspension, drive shaft. Anti-roll bar — 1Rear suspension, drive shaft. Suspension link, track rod — 1Rear suspension, drive shaft. Suspension strut, shock absorber, spring — 1Rear suspension, drive shaft. Wheel bearing assembly, trailing arm — 1Rear suspension, drive shaft. Drive shaft — 1Self-levelling air spring system. Electronically controlled damping — 1Self-levelling air spring system. Vehicle level sender — 1Wheels, tyres. axle align. Wheel alignment — 1Wheels, tyres. axle align. Wheels, tyres — 1Steering. Steering wheel — 1Steering. Steering column — 1Steering. Steering rack — 1Brake system. Technical data — 1ABS, ADR, TCS, EDL, ESP. Overview of fitting locations — 1ABS, ADR, TCS, EDL, ESP. Control unit and hydraulic unit — 1ABS, ADR, TCS, EDL, ESP. Sensors — 1Brake, brake mechanics. Front brake — 1Brake, brake mechanics. Rear brake — 1Brake, brake mechanics. Parking brake — 1Brake, brake mechanics. Brake pedal — 1Brakes, hydraulics, regulator, servo. Brake servo and brake master cylinder — 1Brakes, hydraulics, regulator, servo. Hydraulic system — 1Wheels and Tyres Guide. Wheels, tyres. axle align — 1Wheels, tyres. axle align. Instructions on using the guide — 1Wheels, tyres. axle align. Legislative and technical conditions — 1Wheels, tyres. axle align. Wheel change — 1Wheels, tyres. axle align. Fitting tyre — 1Wheels, tyres. axle align. Wheel bolts — 1Wheels, tyres. axle align. Information on tyres — 1Wheels, tyres. axle align. Handling problems — 1Wheels, tyres. axle align. Evaluating tyres — 1Wheels, tyres. axle align. Tyre wear — 1Starter-current supply-CC. Battery — 1Instruments, GCI. Dash panel insert — 1Instruments, GCI. Horn — 1Windscreen wipewash system. Windscreen wiper system — 1Windscreen wipewash system. Windscreen washer system — 1Windscreen wipewash system. Rear window wiper system — 1Windscreen wipewash system. Rear window washer system — 1Lights, lamps, switches outside. LED headlight — 1Lights, lamps, switches outside. LED matrix headlight — 1Lights, lamps, switches outside. Tail lights — 1Lights, lamps, switches outside. Lights in exterior mirror — 1Lights, lamps, switches outside. Number plate light — 1Lights, lamps, switches outside. Entry and start authorisation system — 1Lights, lamps, switches outside. Steering column switch module — 1Lights, lamps, switches outside. Towing bracket — 1Lights, lamps, switches inside, anti-theft system. Lights — 1Lights, lamps, switches inside, anti-theft system. Controls — 1Lights, lamps, switches inside, anti-theft system. Anti-theft alarm system — 1Lights, lamps, switches inside, anti-theft system. Cigarette lighter, socket — 1Wiring. Relay carriers, fuse holders, electronics boxes — 1Wiring. Control units — 1Infotainment. Componentscontrol units — 1Infotainment. Multifunction steering wheel — 1Driver assist systems. Senders, sensors, control units — 1Driver assist systems. Adaptive cruise control — 1Driver assist systems. Reversing camera system — 1Driver assist systems. Front camera for driver assist systems — 1Driver assist systems. Overhead view camera — 1Electrical system. Starter-current supply-CC — 1Electrical system. Windscreen wipe and wash system — 1Wiring. Wires and lines — 1
~5min read
  • Assembly overview - moulded headliner, vehicles with sliding sunroof
  • Assembly overview - moulded headliner, vehicles without sliding sunroof
  • Removing and installing roof end strip
  • Removing and installing moulded headliner
  • Installing roof reinforcement to body

Assembly overview - moulded headliner, vehicles with sliding sunroof

Assembly overview - moulded headliner, vehicles with sliding sunroof

1 - Roof reinforcement

❏ → Rep. gr.70; Installing roof reinforcement to body

2 - Moulded headliner

❏ → Rep. gr.70; Removing and installing moulded headliner

3 - Roof end strip

❏ → Rep. gr.70; Removing and installing roof end strip

4 - Clip

❏ Qty. 4

5 - Clip

❏ Qty. 20

Assembly overview - moulded headliner, vehicles without sliding sunroof

Assembly overview - moulded headliner, vehicles without sliding sunroof

1 - Front roof reinforcement

❏ → Rep. gr.70; Installing roof reinforcement to body

2 - Rear roof reinforcement

❏ → Rep. gr.70; Installing roof reinforcement to body

3 - Roof end strip

❏ → Rep. gr.70; Removing and installing roof end strip

4 - Moulded headliner

❏ → Rep. gr.70; Removing and installing moulded headliner

5 - Clip

❏ Qty. 4

Removing and installing roof end strip

Removing and installing roof end strip

Special tools and workshop equipment required

♦ removal tool -T40280-

♦ wedge -T10383-

Removing

– Use wedge -T10383- to unclip roof end strip -1-.

Installing

Install in reverse order of removal, observing the following:

– Remove any retaining clips left in body using removal tool -T40280-, and insert them into roof end strip for installation.

Removing and installing moulded headliner

Removing and installing moulded headliner

Special tools and workshop equipment required

♦ pliers -T10558A-

Removing

– Release upper A-pillar trims → Rep. gr.70; Removing and installing upper A-pillar trim.

– Remove C-pillar trims → Rep. gr.70; Removing and installing C-pillar trim.

– Remove sun visors → Rep. gr.68; Removing and installing sun visor.

– Remove sun visor centre mount → Rep. gr.68; Removing and installing sun visor centre mount.

– Remove front interior light -WX1- → Electrical system; Rep. gr.96; Controls; Removing and installing front interior light [WX1].

– Remove roof grab handles → Rep. gr.68; Removing and installing roof grab handle.

Vehicles with glass panel

– Open sunroof roller blind.

All vehicles (continued)

– Release rear seat backrests, and fold them forwards.

– Move front seats to foremost and lowest position.

– Free off upper B-pillar trim -1- in area of inner door seal.

– Use commercially available plastic wedge to unclip lower B-pillar trim -1- at sides in direction of -arrow A-.

– Remove upper B-pillar trim -1- in direction of -arrow B-.

NOTICE

Risk of damage from incorrect handling.

– Do not kink moulded headliner.

Important

● When carrying out the steps below, always make sure that the pliers -T10558A- is positioned centrally in the retaining clips.

– Unclip retaining clips -2- from moulded headliner retaining frame -1- using pliers -T10558A-.

– Hold moulded headliner -1- pretensioned in direction of -arrow- in such a way that released retaining clips -2- do not engage again.

The aid of an additional person is required for the subsequent work steps.

– While holding moulded headliner -1- in position, unclip retaining clips -2- in rear area.

Vehicles with glass panel

– Unclip retaining clips -1- all around.

All vehicles (continued)

– Disconnect electrical connector.

– Carefully remove moulded headliner -1- through rear lid opening in direction of -arrow-.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.70; Assembly overview – moulded headliner

Installing roof reinforcement to body

Installing roof reinforcement to body

Special tools and workshop equipment required

♦ electric cutter -V.A.G 1561B-

♦ hand-cartridge gun -V.A.G 1628-

♦ scraper -V.A.G 1561/20-

Removing

– Remove moulded headliner → Rep. gr.70; Removing and installing moulded headliner.

– Cut roof reinforcements -1- and -2- into approx. 6 cm wide strips -3-.

– Pull strips -3- in direction of -arrow- off roof.

– Remove adhesive residue using electric cutter -V.A.G 1561B- and scraper -V.A.G 1561/20-.

Important

● If paintwork is damaged during removal of roof reinforcement, restore paint finish in accordance with specifications → Vehicle-specific paint information; Rep. gr.54; Paintwork structure; Paintwork structure of factory paintwork, clear coat.

Installing

Important

● Observe processing instructions for the adhesive when installing roof reinforcements.

Vehicles without sliding sunroof

– Using hand-cartridge gun -V.A.G 1628-, apply 1-component assembly adhesive → Electronic parts catalogue (ETKA) in beads -2- of 6 mm in diameter to roof reinforcements -1- in accordance with the following dimensions:

♦ Dimension -a- = 95 mm

♦ Dimension -b- = 105 mm

♦ Dimension -c- = 20 mm

♦ Dimension -d- = 830 mm

♦ Dimension -e- = 25 mm

– Position front roof reinforcement -1- according to dimension -a- centrally on roof, and press it on across entire surface.

♦ Dimension -a-: 21 mm from front sheet-metal edge

♦ Dimension -b-: 146 mm from front sheet-metal edge

– Position rear roof reinforcement -2- according to dimension -c- centrally on roof; and press it on across entire surface.

♦ Dimension -d-: 25 mm from rear sheet metal edge

♦ Dimension -e-: 40 mm side distance to side panel

All vehicles (continued)

Vehicles with sliding sunroof

– Using hand-cartridge gun -V.A.G 1628-, apply 1-component assembly adhesive → Electronic parts catalogue (ETKA) in beads -2- of 6 mm in diameter to roof reinforcement -1- in accordance with the following dimensions:

♦ Dimension -a- = 95 mm

♦ Dimension -b- = 20 mm

♦ Dimension -c- = 900 mm

♦ Dimension -d- = 23 mm

– Position front roof reinforcement -1- according to dimension -a- centrally on roof, and press it on across entire surface.

♦ Dimension -a-: 18 mm from front sheet-metal edge

♦ Dimension -b-: 25 mm from rear sheet-metal edge

♦ Dimension -e-: 35 mm side distance to side panel

All vehicles (continued)

– Install moulded headliner → Rep. gr.70; Removing and installing moulded headliner.