Passenger protection. Seat belts

In this manual: Passenger protection. Seat belts
Technical data. Panel gaps - front — 1Body front. Lock carrier — 1Body front. Wings — 1Body front. Bulkhead — 1Bonnet, flaps, cab, central locking. Bonnet — 1Bonnet, flaps, cab, central locking. Rear lid — 1Bonnet, flaps, cab, central locking. Charging flap unit — 1Front door, central locking. Door — 1Front door, central locking. Door components — 1Front door, central locking. Central locking — 1Rear door,sliding door,wing doors,central locking. Door — 1Rear door,sliding door,wing doors,central locking. Door components — 1Sliding roof. Sliding sunroof — 1Bumper. Bumper, front — 1Bumper. Bumper, rear — 1Glazing & window mechanism. Repair notes — 1Glazing & window mechanism. Windscreen — 1Glazing & window mechanism. Rear windscreen — 1Glazing & window mechanism. Side windows — 1Glazing & window mechanism. Door windows — 1Exterior equipment. Spoiler — 1Exterior equipment. Mouldings, trims, extensions — 1Exterior equipment. Underbody cladding — 1Exterior equipment. Roof moulding and roof railing — 1Exterior equipment. Exterior mirror — 1Exterior equipment. Wheel housing liner — 1Exterior equipment. Lettering and emblems — 1Exterior equipment. Bicycle carrier — 1Exterior equipment. Trim film and protective film — 1Interior equipment. Compartments & covers — 1Interior equipment. Equipment — 1Interior equipment. Centre console — 1Interior equipment. Front centre armrest — 1Interior equipment. Interior mirror — 1Passenger protection. Seat belts — 1Passenger protection. Child seat anchors — 1Passenger protection. Airbag system — 1Passenger protection. Airbag control unit — 1Passenger protection. Front airbag, driver side — 1Passenger protection. Front passenger airbag — 1Passenger protection. Side airbags — 1Passenger protection. Curtain airbags — 1Passenger protection. Airbag crash sensors — 1Passenger protection. Seat occupied recognition — 1Trim, noise insulation. Front door trims — 1Trim, noise insulation. Rear door trims — 1Trim, noise insulation. Dash panel — 1Trim, noise insulation. Central tube for dash panel — 1Trim, noise insulation. Interior trims — 1Trim, noise insulation. Roof trims — 1Trim, noise insulation. Luggage compartment trims — 1Seat frames. Overview of seat variants — 1Seat frames. Front seats — 1Seat frames. Rear seats — 1Seat padding, covers. Front seat covers and padding — 1Seat padding, covers. Rear seat covers and padding — 1Vehicle-specific paintwork information. Explanation of symbols — 1Vehicle-specific paintwork information. Paintwork structure — 1Vehicle-specific paintwork information. Areas exposed to stone chipping — 1Vehicle-specific paintwork information. Masked sectors — 1Vehicle-specific paintwork information. Seam sealing — 1Vehicle-specific paintwork information. Underseal — 1Vehicle-specific paintwork information. Cavity sealing — 1Vehicle-specific paintwork information. Contrasting colours — 1Vehicle-specific paintwork information. Paintwork repair — 1Technical data. Acoustic considerations during vehicle development — 1Technical data. General procedure for identifying noises — 1Technical data. Volkswagen equipment for localising noises — 1Technical data. Borescope VAS 6748A — 1Technical data. Causes — 1Technical data. Locating water ingress — 1Technical data. Attachments — 1Technical data. Vehicle identification data — 1Technical data. Safety information — 1Technical data. Body parts and materials — 1Technical data. Alignment jig — 1Body front. Longitudinal member cross panel — 1Body front. Longitudinal member — 1Body front. Front wheel housing — 1Body centre, roof, frame. Roof — 1Body centre, roof, frame. A-pillar — 1Body centre, roof, frame. B-pillar — 1Body centre, roof, frame. Side member — 1Body, rear. Rear cross member — 1Body, rear. Rear cross panel — 1Body, rear. Luggage compartment floor — 1Body, rear. Rear longitudinal member — 1Body, rear. Side panel — 1Body, rear. Rear wheel housing — 1General information, Body. Basic information on body repairs — 1General information, Body. Explanation of symbols — 1General information, Body. Overview of materials used — 1General information, Body. Joining and separating techniques — 1General information, Body. Surface repair — 1General information, Body. Corrosion protection — 1General information, Body. Noise insulation — 1General information, Body. Plastic repair — 1General information, Body. Welding plastic attachments — 1General information, Body. General notes – windows — 1General information, Body. Glass repair — 1General information, Body. Use of adhesives — 1General information, Body. Self-adhesive components — 1General information, Body. Noises — 1General information, Body. Preparing for disposal — 1General information, Body. Leaks — 1General information, paint. Safety information — 1General information, paint. General information — 1Genuine products. Filler — 1Genuine products. Priming metal — 1Genuine products. Priming plastic materials — 1Genuine products. Surfacer — 1Genuine products. 2-pack top coats — 1Repair painting work. Paint finish – decorative strips and films — 1Repair painting work. Tips and tricks — 1Air conditioner. Overview of fitting locations — 1Air conditioner. Refrigerant circuit — 1Air conditioner. Valve unit of heat pump — 1Air conditioner. Air conditioner compressor — 1Air conditioner. Control motors — 1Air conditioner. Front heater and air conditioning unit — 1Air conditioner. Air duct — 1Air conditioner. Coolant circuit — 1Air conditioner. Other controlling and regulating components — 1Air conditioner. Air quality improvement system — 11-speed gearbox 0MH, rear, EQ310. Technical data — 11-speed gearbox 0MH, rear, EQ310. Gearbox mechanics,operation, construction,diff — 11-speed gearbox 0MH, rear, EQ310. Final drive, differential, differential lock — 1General information. High voltage — 1Electric drive EIP220, EIA200, EIA210. Technical data — 1Electric drive EIP220, EIA200, EIA210. Engine assy,cylinder block,crankcase — 1Electric drive EIP220, EIA200, EIA210. Engine cooling — 1Electric drive. High-voltage components, charging unit and voltage converter — 1Electric drive. Warning stickers — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing without wax — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing with wax — 1Electric drive. Power and control electronics for electric drive — 1Electric drive. Electric drive motor — 1Electric drive. Motor control unit — 1Electric drive. De-energising high-voltage system — 1Electric drive. Re-energise high-voltage system — 1Electric drive. Potential equalisation lines — 1Electric drive. Charging socket, with charging cable — 1Electric drive. Charging socket, with separate charging cable — 1Electric drive. Charging unit for high-voltage battery — 1Electric drive. Charging unit for high-voltage battery, with integrated voltage converter — 1Electric drive. Vehicle noise & engine sound — 1Electric drive. Accelerator pedal — 1Electric drive. Voltage converter — 1Electric drive. High-voltage cables, all-wheel drive — 1Electric drive. High-voltage cables, rear-wheel drive — 1Front suspension, drive shafts. Front axle — 1Front suspension, drive shafts. Subframe — 1Front suspension, drive shafts. Suspension strut, upper suspension link — 1Front suspension, drive shafts. Lower suspension link, swivel joint — 1Front suspension, drive shafts. Wheel bearing — 1Front suspension, drive shafts. Anti-roll bar — 1Rear suspension, drive shaft. Rear axle — 1Rear suspension, drive shaft. Subframe — 1Rear suspension, drive shaft. Anti-roll bar — 1Rear suspension, drive shaft. Suspension link, track rod — 1Rear suspension, drive shaft. Suspension strut, shock absorber, spring — 1Rear suspension, drive shaft. Wheel bearing assembly, trailing arm — 1Rear suspension, drive shaft. Drive shaft — 1Self-levelling air spring system. Electronically controlled damping — 1Self-levelling air spring system. Vehicle level sender — 1Wheels, tyres. axle align. Wheel alignment — 1Wheels, tyres. axle align. Wheels, tyres — 1Steering. Steering wheel — 1Steering. Steering column — 1Steering. Steering rack — 1Brake system. Technical data — 1ABS, ADR, TCS, EDL, ESP. Overview of fitting locations — 1ABS, ADR, TCS, EDL, ESP. Control unit and hydraulic unit — 1ABS, ADR, TCS, EDL, ESP. Sensors — 1Brake, brake mechanics. Front brake — 1Brake, brake mechanics. Rear brake — 1Brake, brake mechanics. Parking brake — 1Brake, brake mechanics. Brake pedal — 1Brakes, hydraulics, regulator, servo. Brake servo and brake master cylinder — 1Brakes, hydraulics, regulator, servo. Hydraulic system — 1Wheels and Tyres Guide. Wheels, tyres. axle align — 1Wheels, tyres. axle align. Instructions on using the guide — 1Wheels, tyres. axle align. Legislative and technical conditions — 1Wheels, tyres. axle align. Wheel change — 1Wheels, tyres. axle align. Fitting tyre — 1Wheels, tyres. axle align. Wheel bolts — 1Wheels, tyres. axle align. Information on tyres — 1Wheels, tyres. axle align. Handling problems — 1Wheels, tyres. axle align. Evaluating tyres — 1Wheels, tyres. axle align. Tyre wear — 1Starter-current supply-CC. Battery — 1Instruments, GCI. Dash panel insert — 1Instruments, GCI. Horn — 1Windscreen wipewash system. Windscreen wiper system — 1Windscreen wipewash system. Windscreen washer system — 1Windscreen wipewash system. Rear window wiper system — 1Windscreen wipewash system. Rear window washer system — 1Lights, lamps, switches outside. LED headlight — 1Lights, lamps, switches outside. LED matrix headlight — 1Lights, lamps, switches outside. Tail lights — 1Lights, lamps, switches outside. Lights in exterior mirror — 1Lights, lamps, switches outside. Number plate light — 1Lights, lamps, switches outside. Entry and start authorisation system — 1Lights, lamps, switches outside. Steering column switch module — 1Lights, lamps, switches outside. Towing bracket — 1Lights, lamps, switches inside, anti-theft system. Lights — 1Lights, lamps, switches inside, anti-theft system. Controls — 1Lights, lamps, switches inside, anti-theft system. Anti-theft alarm system — 1Lights, lamps, switches inside, anti-theft system. Cigarette lighter, socket — 1Wiring. Relay carriers, fuse holders, electronics boxes — 1Wiring. Control units — 1Infotainment. Componentscontrol units — 1Infotainment. Multifunction steering wheel — 1Driver assist systems. Senders, sensors, control units — 1Driver assist systems. Adaptive cruise control — 1Driver assist systems. Reversing camera system — 1Driver assist systems. Front camera for driver assist systems — 1Driver assist systems. Overhead view camera — 1Electrical system. Starter-current supply-CC — 1Electrical system. Windscreen wipe and wash system — 1Wiring. Wires and lines — 1
~16min read
0204060801004030N·mlb·ft
Tightening torque found on this page
  • Overview of fitting locations – seat belts and anchorage points
  • Assembly overview – front three-point seat belt
  • Assembly overview ? rear outer three-point seat belt
  • Assembly overview – rear centre three-point seat belt
  • Assembly overview ? front belt buckle
  • Assembly overview – rear belt buckle
  • Removing and installing front three-point seat belt [NX10]/[NX11]
  • Removing and installing rear outer three-point seat belt
  • Removing and installing rear centre three-point seat belt
  • Removing and installing rear right belt buckle
  • Removing and installing rear belt guide
  • Removing and installing front belt guide
  • Removing and installing front belt end fitting
  • Removing and installing rear outer belt end fitting
  • Removing and installing front belt buckle
  • Removing and installing rear centre belt buckle

Overview of fitting locations – seat belts and anchorage points

Overview of fitting locations – seat belts and anchorage points

1 - Front belt buckles

❏ With driver side belt switch -E24-/front passenger side belt switch -E25-

❏ → Rep. gr.69; Assembly overview – front belt buckle

❏ → Rep. gr.69; Removing and installing front belt buckle

2 - Front belt end fitting

❏ With igniter for driver side seat belt tensioner 2 -N297-/igniter for front passenger side seat belt tensioner 2 -N298-

❏ → Rep. gr.69; Assembly overview – front three-point seat belt

❏ → Rep. gr.69; Removing and installing front three-point seat belt

3 - Front three-point seat belt

❏ Front left seat belt -NX10- with driver seat belt tensioner igniter 1 -N153-/front passenger seat belt tensioner igniter 1 -N154-

❏ With control unit for front left belt tensioner -J854-

❏ Front right seat belt -NX11- with driver seat belt tensioner igniter 1 -N153-/front passenger seat belt tensioner igniter 1 -N154-

❏ With control unit for front right belt tensioner -J855-

❏ → Rep. gr.69; Assembly overview – front three-point seat belt

❏ → Rep. gr.69; Removing and installing front three-point seat belt

4 - Rear outer belt end fitting

❏ → Rep. gr.69; Assembly overview – rear outer three-point seat belt

❏ → Rep. gr.69; Removing and installing rear outer belt end fitting

5 - Outer rear three-point seat belt

❏ With rear belt tensioner igniter on driver side -N196-/rear belt tensioner igniter on passenger side -N197-

❏ → Rep. gr.69; Assembly overview – rear outer three-point seat belt

❏ → Rep. gr.69; Removing and installing rear outer three-point seat belt

6 - Rear centre three-point seat belt

❏ → Rep. gr.69; Assembly overview – rear centre three-point seat belt

❏ → Rep. gr.69; Removing and installing rear centre three-point seat belt

7 - Twin belt buckle -FX4-

❏ Left-hand drive vehicles with belt switch for seat row 2, driver side -F390- and belt switch for seat row 2, middle -F391-

❏ Right-hand drive vehicles with belt switch for seat row 2, passenger side -F392- and belt switch for seat row 2, middle -F391-

❏ → Rep. gr.69; Assembly overview – rear belt buckle

❏ → Rep. gr.69; Removing and installing rear belt buckle

8 - Belt buckle

❏ Left-hand drive vehicles: belt switch for seat row 2, passenger side -F392-

❏ Right-hand drive vehicles: belt switch for seat row 2, driver side -F390-

❏ → Rep. gr.69; Assembly overview – rear belt buckle

❏ → Rep. gr.69; Removing and installing rear belt buckle

Assembly overview – front three-point seat belt

Assembly overview – front three-point seat belt

Overview shown for left side of vehicle as an example

1 - Bolt

❏ 40 N·m

2 - Front belt guide

❏ → Rep. gr.69; Removing and installing front belt guide

3 - Belt webbing

4 - Electrical connector

5 - Electrical connector

6 - Front three-point seat belt, basic version

❏ Depending on equipment/version

❏ With driver seat belt tensioner igniter 1 -N153- or front passenger seat belt tensioner igniter 1 -N154-

❏ → Rep. gr.69; Removing and installing front three-point seat belt

7 - Front three-point seat belt, electrically reversible version

❏ Depending on equipment/version

❏ Front left seat belt -NX10- or front right seat belt -NX11-

❏ With control unit for front left belt tensioner -J854- or control unit for front right belt tensioner -J855-

❏ With driver seat belt tensioner igniter 1 -N153- or front passenger seat belt tensioner igniter 1 -N154-

❏ → Rep. gr.69; Removing and installing front three-point seat belt

8 - Nut

❏ 40 N·m

9 - Front belt end fitting

❏ With igniter for driver side seat belt tensioner 2 -N297- or igniter for front passenger side seat belt tensioner 2 -N298-

❏ → Rep. gr.69; Removing and installing front belt end fitting

10 - Electrical connector

11 - Bolt

❏ 40 N·m

12 - Electrical connector

13 - Spreader rivet

Assembly overview ? rear outer three-point seat belt

Assembly overview ? rear outer three-point seat belt

The overview is shown for the left side of vehicle as an example.

1 - Bolt

❏ 40 N·m

2 - Electrical connector

3 - Outer rear three-point seat belt

❏ Depending on equipment/version

❏ With rear belt tensioner igniter on driver side -N196- or rear belt tensioner igniter on passenger side -N197-

❏ → Chapter „Removing and installing rear outer three-point seat belt“

4 - Nut

❏ 40 N·m

5 - Rear outer belt end fitting

❏ → Rep. gr.69; Removing and installing rear outer belt end fitting

Assembly overview – rear centre three-point seat belt

Assembly overview – rear centre three-point seat belt

1 - Frame, rear seat backrest

2 - Rear belt guide

❏ → Rep. gr.69; Removing and installing rear belt guide

3 - Rear centre three-point seat belt

❏ → Rep. gr.69; Removing and installing rear three-point seat belt

4 - Rear centre belt end fitting

❏ → Rep. gr.69; Removing and installing rear three-point seat belt

5 - Front right belt buckle

❏ Depending on equipment/version

❏ Left-hand drive vehicles: belt switch for seat row 2, passenger side -F392-

❏ Right-hand drive vehicles: belt switch for seat row 2, driver side -F390-

❏ → Rep. gr.69; Removing and installing rear right belt buckle

6 - Bolt

❏ 40 N·m

7 - Nut

❏ 40 N·m

Assembly overview ? front belt buckle

Assembly overview ? front belt buckle

The overview is shown for the left side of vehicle as an example.

1 - Front seat

❏ → Rep. gr.72; Assembly overview – front seat

2 - Front belt buckle, with driver side belt switch -E24- or front passenger side belt switch -E25-

❏ → Rep. gr.69; Removing and installing front belt buckle

3 - Electrical connector

4 - Bracket

5 - Bolt

❏ 40 N·m

Assembly overview – rear belt buckle

Assembly overview – rear belt buckle

1 - Front right belt buckle

❏ Left-hand drive vehicles: belt switch for seat row 2, passenger side -F392-

❏ Right-hand drive vehicles: belt switch for seat row 2, driver side -F390-

❏ → Rep. gr.69; Removing and installing rear right belt buckle

2 - Bolt

❏ 40 N·m

3 - Rear centre belt buckle

❏ Depending on equipment/version

❏ With belt switch for seat row 2, middle -F391-

❏ → Rep. gr.69; Removing and installing rear centre belt buckle

4 - Rear left belt buckle

❏ Left-hand drive vehicles: belt switch for seat row 2, driver side -F390-

❏ Right-hand drive vehicles: belt switch for seat row 2, passenger side -F392-

❏ → Rep. gr.69; Removing and installing rear belt buckle

Removing and installing front three-point seat belt [NX10]/[NX11]

Removing and installing front three-point seat belt [NX10]/[NX11]

Front left seat belt -NX10- and front right seat belt -NX11- are referred to hereafter as three-point seat belt.

Removing

– Disconnect battery earth cable → Electrical system; Rep. gr.27; Battery; Disconnecting and connecting battery.

– Remove front belt guide → Rep. gr.69; Removing and installing front belt guide.

– Remove front belt end fitting → Rep. gr.69; Removing and installing front belt end fitting.

– Unscrew bolt -1-.

– Remove belt guide fitting -2- with belt webbing.

Basic version

CAUTION

It is possible to trigger pyrotechnic components unintentionally.

Risk of injury

– Discharge static electricity by briefly touching door striker plate.

– Disconnect electrical connector -1-.

– Unscrew bolt -arrow-.

– Remove front three-point seat belt -2-.

All vehicles (continued)

Electrically reversible version

CAUTION

It is possible to trigger pyrotechnic components unintentionally.

Risk of injury

– Discharge static electricity by briefly touching door striker plate.

– Disconnect electrical connectors -1- and -2-.

– Remove spreader rivet -upper arrow-.

– Unscrew bolt -lower arrow-.

– Remove front three-point seat belt -3-.

All vehicles (continued)

Installing

Install in reverse order of removal, observing the following:

If parts of the belt system are removed because of an accident:

– Renew all bolts of belt system → Rep. gr.69; Assembly overview - front three-point seat belt.

All vehicles (continued)

– Insert front seat belt with anti-twist protection -1- in direction of -arrow- into mounting and tighten bolt.

Electrical connector must engage audibly.

– Connect electrical connector.

Continued

– Connect battery earth cable → Electrical system; Rep. gr.27; Battery; Disconnecting and connecting battery.

CAUTION

Pyrotechnic components can trigger unintentionally.

Risk of injury.

– Keep far away from pyrotechnic components when switching on ignition.

– Switch on ignition.

In event of renewal of front three-point automatic seat belt, electrically reversible version:

– Carry out function “Adapt” using → Vehicle diagnostic tester → Rep. gr.00; Access to diagnoses.

Continued

Tightening torques

♦ → Rep. gr.69; Assembly overview – front three-point seat belt

Removing and installing rear outer three-point seat belt

Removing and installing rear outer three-point seat belt

Rear three-point seat belt with rear belt tensioner igniter on driver side -N196- or rear belt tensioner igniter on passenger side -N197- is referred to hereafter as rear three-point seat belt.

Removal and installation are described for left side of vehicle as an example.

Removing

– Remove C-pillar trim → Rep. gr.70; Removing and installing C-pillar trim.

– Remove rear outer belt end fitting → Rep. gr.69; Removing and installing rear outer belt end fitting.

– Disconnect battery earth cable → Electrical system; Rep. gr.27; Battery; Disconnecting and connecting battery.

– Unscrew bolt -4-.

– Detach rear outer three-point seat belt -2- in direction of -arrow- from mounting bracket -1-.

CAUTION

It is possible to trigger pyrotechnic components unintentionally.

Risk of injury

– Discharge static electricity by briefly touching door striker plate.

– Disconnect electrical connector -3-.

Installing

Install in reverse order of removal, observing the following:

If parts of the belt system are removed because of an accident:

– Renew all bolts of belt system → Rep. gr.69; Assembly overview - rear outer three-point seat belt.

All vehicles (continued)

Connect electrical connectors until they engage audibly.

– Fit electrical connectors.

Continued

CAUTION

It is possible to trigger pyrotechnic components unintentionally.

Risk of injury.

– Stay as far back as possible from pyrotechnic components when switching on the ignition.

– Switch on ignition.

Tightening torques

♦ → Rep. gr.69; Assembly overview – rear outer three-point seat belt

Removing and installing rear centre three-point seat belt

Removing and installing rear centre three-point seat belt

Removing

– Remove bench seat → Rep. gr.72; Removing and installing bench seat/individual seats.

– Remove rear right belt buckle → Rep. gr.69; Removing and installing rear belt buckle.

– Remove cover and padding of rear seat backrest → Rep. gr.74; Removing and installing cover and padding of rear seat backrest.

– Unscrew nut -1-.

– Detach rear centre three-point seat belt -2-, and remove it.

– Guide out belt webbing -3-.

Installing

Install in reverse order of removal, observing the following:

– Insert rear centre three-point seat belt ensuring that anti-twist protection engages in mounting, and tighten nut.

Tightening torques

♦ → Rep. gr.69; Assembly overview – rear centre three-point seat belt

Removing and installing rear right belt buckle

Removing and installing rear right belt buckle

Rear right belt buckle with belt switch for seat row 2, driver side -F390- or belt switch for seat row 2, passenger side -F392- is referred to hereafter as rear right belt buckle.

Removing

– Remove bench seat → Rep. gr.72; Removing and installing bench seat/individual seats.

– Disconnect electrical connector -3-, and move it aside.

– Unscrew bolt -1-.

– Remove rear right belt buckle -2-.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.69; Assembly overview – rear belt buckle

Removing and installing rear belt guide

Removing and installing rear belt guide

Removing

– Push cover and padding downwards in area of rear belt guide -1-.

– Using a screwdriver, release locking devices -arrows-.

– Unclip rear belt guide -1- upwards.

– Guide out belt webbing -3- through opening -4-, and detach rear belt guide -1- from rear seat backrest -2-.

Installing

Install in reverse order of removal.

Removing and installing front belt guide

Removing and installing front belt guide

Removing

– Remove upper B-pillar trim → Rep. gr.70; Removing and installing upper B-pillar trim.

– Remove lower B-pillar trim → Rep. gr.70; Removing and installing lower B-pillar trim.

– Press together front belt guide -1- in direction of -arrow A-.

– At the same time, pull out front belt guide -1- in direction of -arrow B-.

– With bars pressed together -arrows A-, pull out front belt guide -1- in direction of -arrow C-.

– Guide out belt webbing, and remove front belt guide -1-.

Installing

Install in reverse sequence of removal.

Removing and installing front belt end fitting

Removing and installing front belt end fitting

Removing

Front belt end fitting with igniter for driver-side seat belt tensioner 2 -N297- or igniter for front passenger-side seat belt tensioner 2 -N298- will henceforth be referred to as “belt end fitting”.

– Disconnect battery earth cable → Electrical system; Rep. gr.27; Battery; Disconnecting and connecting battery.

– Remove front sill panel moulding → Rep. gr.70; Removing and installing front sill panel moulding.

– Remove upper B-pillar trim → Rep. gr.70; Removing and installing upper B-pillar trim.

– Remove lower B-pillar trim → Rep. gr.70; Removing and installing lower B-pillar trim.

– Remove front seat → Rep. gr.72; Removing and installing front seat.

– Push floor covering in area of front belt end fitting towards vehicle centre.

CAUTION

It is possible to trigger pyrotechnic components unintentionally.

Risk of injury

– Discharge static electricity by briefly touching door striker plate.

– Using a small screwdriver, release connector lock -2- in direction of -arrow-, and disconnect electrical connector -1-.

– Unscrew nut -2-.

– Position a screwdriver between clip -4- and body flange -3-.

– Press clip -4- downwards slightly, and detach front belt end fitting -1- inwards.

– Guide out front belt end fitting -2- through opening in upper B-pillar trim -1-.

Installing

Install in reverse order of removal, observing the following:

– Connect electrical connectors until they engage audibly.

– Connect battery earth cable → Electrical system; Rep. gr.27; Battery; Disconnecting and connecting battery.

CAUTION

It is possible to trigger pyrotechnic components unintentionally.

Risk of injury.

– Stay as far back as possible from pyrotechnic components when switching on the ignition.

– Switch on ignition.

Tightening torques

♦ → Rep. gr.69; Assembly overview – front three-point seat belt

Removing and installing rear outer belt end fitting

Removing and installing rear outer belt end fitting

Removing

– Remove rear sill panel moulding → Rep. gr.70; Removing and installing rear sill panel moulding.

– Unscrew nut -1-.

– Detach rear outer belt end fitting -2-.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.69; Assembly overview – rear outer three-point seat belt

Removing and installing front belt buckle

Removing and installing front belt buckle

The front belt buckle with driver side belt switch -E24- or front passenger side belt switch -E25- will henceforth be referred to as “front belt buckle”.

Removing

– Remove front seat → Rep. gr.72; Removing and installing front seat.

– Disconnect and move aside electrical connector -arrow-.

– Unscrew bolt -1-.

– Remove front belt buckle -2-.

Installing

Install in reverse order of removal, observing the following:

– Position belt buckle in such a way that anti-twist protection engages in recess in seat frame.

Tightening torques

♦ → Rep. gr.69; Assembly overview – front belt buckle

Removing and installing rear centre belt buckle

Removing and installing rear centre belt buckle

Twin belt buckle -FX4- with belt switch for seat row 2, middle -F391- and belt switch for seat row 2, driver side -F390- or belt switch for seat row 2, passenger side -F392- is referred to hereafter as rear centre belt buckle.

Removing

– Remove bench seat → Rep. gr.72; Removing and installing bench seat/individual seats.

– Disconnect electrical connector -3-, and move it aside.

– Unscrew bolt -2-.

– Remove rear centre belt buckle -1-.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.69; Assembly overview – rear belt buckle