Seat frames. Front seats

In this manual: Seat frames. Front seats
Technical data. Panel gaps - front — 1Body front. Lock carrier — 1Body front. Wings — 1Body front. Bulkhead — 1Bonnet, flaps, cab, central locking. Bonnet — 1Bonnet, flaps, cab, central locking. Rear lid — 1Bonnet, flaps, cab, central locking. Charging flap unit — 1Front door, central locking. Door — 1Front door, central locking. Door components — 1Front door, central locking. Central locking — 1Rear door,sliding door,wing doors,central locking. Door — 1Rear door,sliding door,wing doors,central locking. Door components — 1Sliding roof. Sliding sunroof — 1Bumper. Bumper, front — 1Bumper. Bumper, rear — 1Glazing & window mechanism. Repair notes — 1Glazing & window mechanism. Windscreen — 1Glazing & window mechanism. Rear windscreen — 1Glazing & window mechanism. Side windows — 1Glazing & window mechanism. Door windows — 1Exterior equipment. Spoiler — 1Exterior equipment. Mouldings, trims, extensions — 1Exterior equipment. Underbody cladding — 1Exterior equipment. Roof moulding and roof railing — 1Exterior equipment. Exterior mirror — 1Exterior equipment. Wheel housing liner — 1Exterior equipment. Lettering and emblems — 1Exterior equipment. Bicycle carrier — 1Exterior equipment. Trim film and protective film — 1Interior equipment. Compartments & covers — 1Interior equipment. Equipment — 1Interior equipment. Centre console — 1Interior equipment. Front centre armrest — 1Interior equipment. Interior mirror — 1Passenger protection. Seat belts — 1Passenger protection. Child seat anchors — 1Passenger protection. Airbag system — 1Passenger protection. Airbag control unit — 1Passenger protection. Front airbag, driver side — 1Passenger protection. Front passenger airbag — 1Passenger protection. Side airbags — 1Passenger protection. Curtain airbags — 1Passenger protection. Airbag crash sensors — 1Passenger protection. Seat occupied recognition — 1Trim, noise insulation. Front door trims — 1Trim, noise insulation. Rear door trims — 1Trim, noise insulation. Dash panel — 1Trim, noise insulation. Central tube for dash panel — 1Trim, noise insulation. Interior trims — 1Trim, noise insulation. Roof trims — 1Trim, noise insulation. Luggage compartment trims — 1Seat frames. Overview of seat variants — 1Seat frames. Front seats — 1Seat frames. Rear seats — 1Seat padding, covers. Front seat covers and padding — 1Seat padding, covers. Rear seat covers and padding — 1Vehicle-specific paintwork information. Explanation of symbols — 1Vehicle-specific paintwork information. Paintwork structure — 1Vehicle-specific paintwork information. Areas exposed to stone chipping — 1Vehicle-specific paintwork information. Masked sectors — 1Vehicle-specific paintwork information. Seam sealing — 1Vehicle-specific paintwork information. Underseal — 1Vehicle-specific paintwork information. Cavity sealing — 1Vehicle-specific paintwork information. Contrasting colours — 1Vehicle-specific paintwork information. Paintwork repair — 1Technical data. Acoustic considerations during vehicle development — 1Technical data. General procedure for identifying noises — 1Technical data. Volkswagen equipment for localising noises — 1Technical data. Borescope VAS 6748A — 1Technical data. Causes — 1Technical data. Locating water ingress — 1Technical data. Attachments — 1Technical data. Vehicle identification data — 1Technical data. Safety information — 1Technical data. Body parts and materials — 1Technical data. Alignment jig — 1Body front. Longitudinal member cross panel — 1Body front. Longitudinal member — 1Body front. Front wheel housing — 1Body centre, roof, frame. Roof — 1Body centre, roof, frame. A-pillar — 1Body centre, roof, frame. B-pillar — 1Body centre, roof, frame. Side member — 1Body, rear. Rear cross member — 1Body, rear. Rear cross panel — 1Body, rear. Luggage compartment floor — 1Body, rear. Rear longitudinal member — 1Body, rear. Side panel — 1Body, rear. Rear wheel housing — 1General information, Body. Basic information on body repairs — 1General information, Body. Explanation of symbols — 1General information, Body. Overview of materials used — 1General information, Body. Joining and separating techniques — 1General information, Body. Surface repair — 1General information, Body. Corrosion protection — 1General information, Body. Noise insulation — 1General information, Body. Plastic repair — 1General information, Body. Welding plastic attachments — 1General information, Body. General notes – windows — 1General information, Body. Glass repair — 1General information, Body. Use of adhesives — 1General information, Body. Self-adhesive components — 1General information, Body. Noises — 1General information, Body. Preparing for disposal — 1General information, Body. Leaks — 1General information, paint. Safety information — 1General information, paint. General information — 1Genuine products. Filler — 1Genuine products. Priming metal — 1Genuine products. Priming plastic materials — 1Genuine products. Surfacer — 1Genuine products. 2-pack top coats — 1Repair painting work. Paint finish – decorative strips and films — 1Repair painting work. Tips and tricks — 1Air conditioner. Overview of fitting locations — 1Air conditioner. Refrigerant circuit — 1Air conditioner. Valve unit of heat pump — 1Air conditioner. Air conditioner compressor — 1Air conditioner. Control motors — 1Air conditioner. Front heater and air conditioning unit — 1Air conditioner. Air duct — 1Air conditioner. Coolant circuit — 1Air conditioner. Other controlling and regulating components — 1Air conditioner. Air quality improvement system — 11-speed gearbox 0MH, rear, EQ310. Technical data — 11-speed gearbox 0MH, rear, EQ310. Gearbox mechanics,operation, construction,diff — 11-speed gearbox 0MH, rear, EQ310. Final drive, differential, differential lock — 1General information. High voltage — 1Electric drive EIP220, EIA200, EIA210. Technical data — 1Electric drive EIP220, EIA200, EIA210. Engine assy,cylinder block,crankcase — 1Electric drive EIP220, EIA200, EIA210. Engine cooling — 1Electric drive. High-voltage components, charging unit and voltage converter — 1Electric drive. Warning stickers — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing without wax — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing with wax — 1Electric drive. Power and control electronics for electric drive — 1Electric drive. Electric drive motor — 1Electric drive. Motor control unit — 1Electric drive. De-energising high-voltage system — 1Electric drive. Re-energise high-voltage system — 1Electric drive. Potential equalisation lines — 1Electric drive. Charging socket, with charging cable — 1Electric drive. Charging socket, with separate charging cable — 1Electric drive. Charging unit for high-voltage battery — 1Electric drive. Charging unit for high-voltage battery, with integrated voltage converter — 1Electric drive. Vehicle noise & engine sound — 1Electric drive. Accelerator pedal — 1Electric drive. Voltage converter — 1Electric drive. High-voltage cables, all-wheel drive — 1Electric drive. High-voltage cables, rear-wheel drive — 1Front suspension, drive shafts. Front axle — 1Front suspension, drive shafts. Subframe — 1Front suspension, drive shafts. Suspension strut, upper suspension link — 1Front suspension, drive shafts. Lower suspension link, swivel joint — 1Front suspension, drive shafts. Wheel bearing — 1Front suspension, drive shafts. Anti-roll bar — 1Rear suspension, drive shaft. Rear axle — 1Rear suspension, drive shaft. Subframe — 1Rear suspension, drive shaft. Anti-roll bar — 1Rear suspension, drive shaft. Suspension link, track rod — 1Rear suspension, drive shaft. Suspension strut, shock absorber, spring — 1Rear suspension, drive shaft. Wheel bearing assembly, trailing arm — 1Rear suspension, drive shaft. Drive shaft — 1Self-levelling air spring system. Electronically controlled damping — 1Self-levelling air spring system. Vehicle level sender — 1Wheels, tyres. axle align. Wheel alignment — 1Wheels, tyres. axle align. Wheels, tyres — 1Steering. Steering wheel — 1Steering. Steering column — 1Steering. Steering rack — 1Brake system. Technical data — 1ABS, ADR, TCS, EDL, ESP. Overview of fitting locations — 1ABS, ADR, TCS, EDL, ESP. Control unit and hydraulic unit — 1ABS, ADR, TCS, EDL, ESP. Sensors — 1Brake, brake mechanics. Front brake — 1Brake, brake mechanics. Rear brake — 1Brake, brake mechanics. Parking brake — 1Brake, brake mechanics. Brake pedal — 1Brakes, hydraulics, regulator, servo. Brake servo and brake master cylinder — 1Brakes, hydraulics, regulator, servo. Hydraulic system — 1Wheels and Tyres Guide. Wheels, tyres. axle align — 1Wheels, tyres. axle align. Instructions on using the guide — 1Wheels, tyres. axle align. Legislative and technical conditions — 1Wheels, tyres. axle align. Wheel change — 1Wheels, tyres. axle align. Fitting tyre — 1Wheels, tyres. axle align. Wheel bolts — 1Wheels, tyres. axle align. Information on tyres — 1Wheels, tyres. axle align. Handling problems — 1Wheels, tyres. axle align. Evaluating tyres — 1Wheels, tyres. axle align. Tyre wear — 1Starter-current supply-CC. Battery — 1Instruments, GCI. Dash panel insert — 1Instruments, GCI. Horn — 1Windscreen wipewash system. Windscreen wiper system — 1Windscreen wipewash system. Windscreen washer system — 1Windscreen wipewash system. Rear window wiper system — 1Windscreen wipewash system. Rear window washer system — 1Lights, lamps, switches outside. LED headlight — 1Lights, lamps, switches outside. LED matrix headlight — 1Lights, lamps, switches outside. Tail lights — 1Lights, lamps, switches outside. Lights in exterior mirror — 1Lights, lamps, switches outside. Number plate light — 1Lights, lamps, switches outside. Entry and start authorisation system — 1Lights, lamps, switches outside. Steering column switch module — 1Lights, lamps, switches outside. Towing bracket — 1Lights, lamps, switches inside, anti-theft system. Lights — 1Lights, lamps, switches inside, anti-theft system. Controls — 1Lights, lamps, switches inside, anti-theft system. Anti-theft alarm system — 1Lights, lamps, switches inside, anti-theft system. Cigarette lighter, socket — 1Wiring. Relay carriers, fuse holders, electronics boxes — 1Wiring. Control units — 1Infotainment. Componentscontrol units — 1Infotainment. Multifunction steering wheel — 1Driver assist systems. Senders, sensors, control units — 1Driver assist systems. Adaptive cruise control — 1Driver assist systems. Reversing camera system — 1Driver assist systems. Front camera for driver assist systems — 1Driver assist systems. Overhead view camera — 1Electrical system. Starter-current supply-CC — 1Electrical system. Windscreen wipe and wash system — 1Wiring. Wires and lines — 1
~34min read
0204060801004030N·mlb·ft
Tightening torque found on this page
  • Overview of fitting locations – electrical and electronic components
  • Assembly overview – front seat, manually adjustable
  • Assembly overview – front seat, Top-Sport seat
  • Assembly overview – front seat, Top-Sport
  • Assembly overview – front backrest
  • Assembly overview - seat pan, manual adjustment
  • Assembly overview - seat pan, electric adjustment
  • Assembly overview – seat pan, fixed seat
  • Assembly overview – seat height adjustment, manual
  • Assembly overview – seat height adjustment, electrical
  • Assembly overview - lumbar support
  • Assembly overview ? seat rake adjustment
  • Assembly overview - seat depth adjuster
  • Removing and installing front seat
  • Removing and installing trim for backrest with integrated head restraint
  • Removing and installing seat longitudinal adjustment handle
  • Removing and installing seat height adjustment handle
  • Removing and installing seat height adjustment unit, manually adjustable
  • Removing and installing seat rake adjustment unit
  • Removing and installing front backrest
  • Removing and installing head restraint
  • Removing and installing integrated head restraint
  • Removing and installing head restraint guide
  • Removing and installing lumbar support adjustment switch E176/E177
  • Removing and installing backrest adjuster
  • Securing front seat to seat repair stand
  • Removing and installing lumbar support
  • Removing and installing seat adjustment operating unit [E470]/[E471]
  • Removing and installing bracket for seat trim
  • Removing and installing inner seat trim
  • Removing and installing outer seat trim
  • Removing and installing outer seat trim, front passenger seat without height adjustment
  • Removing and installing seat longitudinal adjustment motor [V28]/[V31]
  • Removing and installing seat depth adjuster
  • Removing and installing seat adjustment control unit
  • Removing and installing operating unit for memory settings [E464]/[E465]
  • Removing and installing wiring harness for seat frame

Overview of fitting locations – electrical and electronic components

Overview of fitting locations – electrical and electronic components

Overview shown for left side of vehicle as an example

1 - Inner side airbag, driver side

❏ With igniter for central airbag for occupant collision protection, driver side -N737-

❏ Fitted on driver side

❏ → Rep. gr.69; Assembly overview – front side airbag, inner side

❏ → Rep. gr.69; Removing and installing front side airbag, inner side

2 - Backrest heating element

❏ With heated backrest for front left seat -Z116- or heated backrest for front right seat -Z117-

❏ Depending on equipment/version

❏ → Rep. gr.74; Removing and installing backrest heating element [Z116]/[Z117]

3 - Lumbar support

❏ Depending on equipment/version

❏ Cannot be renewed individually

❏ → Rep. gr.72; Removing and installing lumbar support

4 - Front side airbag, outer side

❏ With side airbag igniter on driver side -N199- or side airbag igniter on front passenger side -N200-

❏ → Rep. gr.69; Assembly overview – front side airbag, outer side

❏ → Rep. gr.69; Removing and installing front side airbag, outer side

5 - Compressor for multicontour driver seat -V439-/compressor for multicontour front passenger seat -V440-

❏ Depending on equipment/version

❏ Cannot be renewed individually

❏ → Rep. gr.72; Removing and installing lumbar support

6 - Seat height adjuster

❏ With driver seat height adjustment motor -V245- or front passenger seat height adjustment motor -V246-

❏ Depending on equipment/version

❏ → Rep. gr.72; Assembly overview – seat height adjustment

❏ → Rep. gr.72; Removing and installing seat height adjuster

7 - Driver seat adjustment operating unit -E470-/front passenger seat adjustment operating unit -E471-

❏ Depending on equipment/version

❏ → Rep. gr.72; Removing and installing seat adjustment operating unit [E470]/[E471]

8 - Driver operating unit for memory settings -E464-/front passenger operating unit for memory settings -E465-

❏ Depending on equipment/version

❏ → Chapter „Removing and installing operating unit for memory settings [E464]/[E465]“

9 - Massage seat control unit

❏ With control unit for front left massage seat -J803- or control unit for front right massage seat -J804-

❏ Depending on equipment/version

❏ Cannot be renewed individually

❏ → Rep. gr.72; Removing and installing lumbar support

10 - Left footwell light -W9-/right footwell light -W10-

❏ → Electrical system; Rep. gr.96; Lights; Removing and installing footwell light W9/W10

11 - Seat occupied sensor on driver side -G1067-/seat occupied sensor on front passenger side -G128-

❏ → Rep. gr.69; Removing and installing front seat occupied sensor [G1067]/[G128]

12 - Driver seat lumbar support adjustment switch -E176-/front passenger seat lumbar support adjustment switch -E177-

❏ Depending on equipment/version

❏ → Rep. gr.72; Removing and installing lumbar support adjustment switch [E176]/[E177]

13 - Driver seat rake adjustment motor -V243-/front passenger seat rake adjustment motor -V244-

❏ Depending on equipment/version

❏ → Rep. gr.72; Removing and installing seat rake adjustment motor [V243]/[V244]

14 - Electrical wire

15 - Seat and steering column adjustment control unit with memory -J136-/front passenger seat adjustment control unit with memory -J521-

❏ Depending on equipment/version

❏ → Rep. gr.72; Removing and installing seat adjustment control unit

16 - Driver seat longitudinal adjustment motor -V28-/front passenger seat longitudinal adjustment motor -V31-

❏ Depending on equipment/version

❏ Cannot be renewed individually

❏ → Rep. gr.72; Removing and installing seat longitudinal adjustment motor [V28]/[V31]

17 - Front left seat heating -ZX11-/front right seat heating -ZX13-

❏ Depending on equipment/version

❏ → Rep. gr.74; Removing and installing seat heating element [ZX11]/[ZX13]

18 - Driver side belt switch -E24-/front passenger side belt switch -E25-

❏ → Rep. gr.69; Assembly overview – front belt buckle

❏ → Rep. gr.69; Removing and installing front belt buckle

19 - Driver seat backrest adjustment motor -V45-/front passenger seat backrest adjustment motor -V46-

❏ Depending on equipment/version

❏ Cannot be renewed individually

❏ → Rep. gr.72; Removing and installing front backrest

Assembly overview – front seat, manually adjustable

Assembly overview – front seat, manually adjustable

Overview shown for left side of vehicle as an example

1 - Front backrest

❏ → Rep. gr.72; Assembly overview – front backrest

❏ → Rep. gr.72; Removing and installing front backrest

2 - Head restraint

❏ → Rep. gr.72; Assembly overview – head restraint

❏ → Rep. gr.72; Removing and installing head restraint

3 - Backrest adjustment handle

❏ → Rep. gr.72; Removing and installing backrest adjustment handle

4 - Outer side trim

❏ → Rep. gr.72; Removing and installing outer seat trim

5 - Handle for seat height adjustment

❏ → Rep. gr.72; Removing and installing seat height adjustment handle

6 - Seat rail cover

❏ Qty. 4

7 - Seat longitudinal adjustment handle

❏ → Rep. gr.72; Removing and installing seat longitudinal adjustment handle

8 - Seat pan

❏ → Rep. gr.72; Assembly overview – seat pan

9 - Front belt buckle

❏ → Rep. gr.69; Assembly overview – front belt buckle

❏ → Rep. gr.69; Removing and installing front belt buckle

10 - Inner seat trim

❏ → Rep. gr.72; Removing and installing inner seat trim

11 - Bolt

❏ Qty. 4

❏ 40 N·m

12 - Centre armrest

❏ → Rep. gr.68; Assembly overview – front centre armrest

❏ → Rep. gr.68; Removing and installing front centre armrest

Assembly overview – front seat, Top-Sport seat

Assembly overview – front seat, Top-Sport seat

Overview shows left-side of vehicle as an example

1 - Front backrest

❏ → Rep. gr.72; Assembly overview – front backrest

❏ → Rep. gr.72; Removing and installing front backrest

2 - Bolt

❏ Qty. 3

❏ Renew after removing

❏ 6,5 N·m

3 - Outer seat trim

❏ → Rep. gr.72; Removing and installing outer seat trim

4 - Driver seat height adjustment motor -V245-/front passenger seat height adjustment motor -V246-

❏ → Rep. gr.72; Removing and installing seat height adjustment unit, electrically adjustable

5 - Seat rail cover

❏ Qty. 4

6 - Operating unit for front left seat adjustment -EX33-/operating unit for front right seat adjustment -EX34-

❏ → Rep. gr.72; Removing and installing seat adjustment operating unit [EX33]/[EX34]

7 - Driver operating unit for memory settings -E464-/front passenger operating unit for memory settings -E465-

❏ → Rep. gr.72; Removing and installing operating unit for memory settings [E464]/[E465]

8 - Driver seat lumbar support adjustment switch -E176-/front passenger seat lumbar support adjustment switch -E177-

❏ → Rep. gr.72; Removing and installing lumbar support adjustment switch [E176]/[E177]

9 - Bolt

❏ Qty. 4

❏ 40 N·m

10 - Seat pan

❏ → Rep. gr.72; Assembly overview – seat pan

11 - Driver seat longitudinal adjustment motor -V28-

❏ → Rep. gr.72; Removing and installing seat longitudinal adjustment motor [V28]

12 - Front belt buckle

❏ → Rep. gr.69; Assembly overview – front belt buckle

❏ → Rep. gr.69; Removing and installing front belt buckle

Assembly overview – front seat, Top-Sport

Assembly overview – front seat, Top-Sport

Overview shown for left side of vehicle as an example

1 - Front centre armrest

❏ → Rep. gr.68; Assembly overview – front centre armrest

❏ → Rep. gr.68; Removing and installing front centre armrest

2 - Front backrest

❏ → Rep. gr.72; Assembly overview – front backrest

❏ → Rep. gr.72; Removing and installing front backrest

3 - Bolt

❏ Qty. 4

❏ 40 N·m

4 - Bolt

❏ Qty. 3

❏ Renew after removing

❏ 6,5 N·m

5 - Driver seat height adjustment motor -V245-/front passenger seat height adjustment motor -V246-

❏ → Rep. gr.72; Removing and installing seat height adjustment unit, electrically adjustable

6 - Outer seat trim

❏ → Rep. gr.72; Removing and installing outer seat trim

7 - Seat rail cover

❏ Qty. 2 or 4 depending on model

8 - Driver operating unit for memory settings -E464-/front passenger operating unit for memory settings -E465-

❏ → Rep. gr.72; Removing and installing operating unit for memory settings [E464]/[E465]

9 - Driver seat adjustment operating unit -E470-/front passenger seat adjustment operating unit -E471-

❏ → Rep. gr.72; Removing and installing seat adjustment operating unit [E470]/[E471]

10 - Driver seat lumbar support adjustment switch -E176-/front passenger seat lumbar support adjustment switch -E177-

❏ → Rep. gr.72; Removing and installing lumbar support adjustment switch [E176]/[E177]

11 - Driver seat longitudinal adjustment motor -V28-

❏ → Rep. gr.72; Removing and installing seat longitudinal adjustment motor [V28]

12 - Seat depth adjustment handle

❏ → Rep. gr.72; Assembly overview – seat depth adjustment

❏ → Rep. gr.72; Removing and installing seat depth adjuster

13 - Seat depth adjuster trim

❏ → Rep. gr.72; Assembly overview – seat depth adjustment

❏ → Rep. gr.72; Removing and installing seat depth adjuster

14 - Seat pan

❏ → Rep. gr.72; Assembly overview – seat pan

15 - Front belt buckle

❏ → Rep. gr.69; Assembly overview – front belt buckle

❏ → Rep. gr.69; Removing and installing front belt buckle

Assembly overview – front backrest

Assembly overview – front backrest

Overview shown for left side of vehicle as an example

1 - Head restraint

❏ Depending on equipment/version

❏ → Rep. gr.72; Assembly overview – head restraint

❏ → Rep. gr.72; Removing and installing head restraint

2 - Head restraint guide

❏ Depending on equipment/version

❏ → Rep. gr.72; Assembly overview – head restraint

❏ → Rep. gr.72; Removing and installing head restraint guide

3 - Front backrest

❏ → Rep. gr.72; Removing and installing front backrest

4 - Backrest adjustment handle

❏ For vehicles without electric backrest adjustment

❏ → Rep. gr.72; Removing and installing backrest adjustment handle

5 - Bolt

❏ Qty. 4

❏ Renew after removing

❏ → Fig.

6 - Centre armrest

❏ → Rep. gr.68; Assembly overview – front centre armrest

❏ → Rep. gr.68; Removing and installing front centre armrest

Specified torque and tightening sequence

StageBoltsSpecified torque1-1- to -4-33 Nm

Assembly overview - seat pan, manual adjustment

Assembly overview - seat pan, manual adjustment

Overview shows left-side of vehicle as an example

1 - Padding

❏ → Rep. gr.74; Assembly overview – seat pan cover and padding

❏ → Rep. gr.74; Removing and installing seat pan cover and padding

❏ → Rep. gr.74; Separating seat pan cover from seat pan padding

2 - Seat pan

3 - Seat trim bracket

❏ → Rep. gr.72; Removing and installing bracket for seat trim

4 - Outer seat trim

❏ → Rep. gr.72; Removing and installing outer seat trim

5 - Backrest adjustment handle

❏ → Rep. gr.72; Removing and installing backrest adjustment handle

6 - Spreader rivet

❏ Left and right

7 - Lever for seat height adjustment

❏ → Rep. gr.72; Removing and installing seat height adjustment unit, manually adjustable

8 - Retaining clip

9 - Handle for seat height adjustment

❏ Renew after removing

❏ → Rep. gr.72; Removing and installing seat height adjustment handle

10 - Bolt

❏ Qty. 2

❏ 8 N·m

11 - Bolt

❏ → Rep. gr.69; Assembly overview – front belt buckle

12 - Front belt buckle

❏ → Rep. gr.69; Assembly overview – front belt buckle

❏ → Rep. gr.69; Removing and installing front belt buckle

13 - Inner seat trim

❏ → Rep. gr.72; Removing and installing inner seat trim

Assembly overview - seat pan, electric adjustment

Assembly overview - seat pan, electric adjustment

Overview shown for left side of vehicle as an example

1 - Padding

❏ → Rep. gr.74; Assembly overview – seat pan cover and padding

❏ → Rep. gr.74; Removing and installing seat pan cover and padding

❏ → Rep. gr.74; Separating seat pan cover from seat pan padding

2 - Bolt

❏ Qty. 4

❏ 22 N·m

3 - Seat pan

4 - Seat trim bracket

❏ → Rep. gr.72; Removing and installing seat trim bracket

5 - Driver operating unit for memory settings -E464-/front passenger operating unit for memory settings -E465-

❏ Driver operating unit for memory settings -E464- with seat memory position button 1 -E218-, seat memory position button 2 -E219-, seat memory position button 3 -E220-, driver seat memory function button -E283-, driver seat massage function button -E670-

❏ Front passenger operating unit for memory settings -E465- with seat memory position button 1 -E218-, seat memory position button 2 -E219-, seat memory position button 3 -E220-, front passenger seat memory function button -E340-, front passenger seat massage function button -E671-

❏ → Rep. gr.72; Removing and installing operating unit for memory settings [E464]/[E465]

6 - Outer seat trim

❏ → Rep. gr.72; Removing and installing outer seat trim

7 - Spreader rivet

❏ Qty. 2

8 - Driver seat adjustment operating unit -E470-/front passenger seat adjustment operating unit -E471-

❏ → Rep. gr.72; Removing and installing seat adjustment operating unit [E470]/[E471]

9 - Driver seat lumbar support adjustment switch -E176-/front passenger seat lumbar support adjustment switch -E177-

❏ → Rep. gr.72; Removing and installing lumbar support adjustment switch [E176]/[E177]

10 - Bolt

❏ Qty. 5

❏ 1 N·m

11 - Bolt

❏ Qty. 2

❏ 8 N·m

12 - Lower frame of seat pan

❏ With driver seat longitudinal adjustment motor -V28- or front passenger seat longitudinal adjustment motor -V31-

❏ → Rep. gr.72; Removing and installing seat longitudinal adjustment motor [V28]/[V31]

13 - Bolt

❏ Specified torque → Rep. gr.69; Assembly overview – front belt buckle

14 - Front belt buckle

❏ → Rep. gr.69; Assembly overview – front belt buckle

❏ → Rep. gr.69; Removing and installing front belt buckle

15 - Inner seat trim

❏ → Rep. gr.72; Removing and installing inner seat trim

Assembly overview – seat pan, fixed seat

Assembly overview – seat pan, fixed seat

Overview shows left-hand drive vehicle as an example

1 - Padding

❏ → Rep. gr.74; Assembly overview – seat pan cover and padding

❏ → Rep. gr.74; Removing and installing seat pan cover and padding

❏ → Rep. gr.74; Separating seat pan cover from seat pan padding

2 - Spreader rivet

❏ Qty. 2

3 - Inner seat trim

❏ → Rep. gr.72; Removing and installing inner seat trim

4 - Belt buckle

❏ → Rep. gr.69; Assembly overview – front belt buckle

❏ → Rep. gr.69; Removing and installing front belt buckle

5 - Bolt

❏ Specified torque → Rep. gr.69; Assembly overview – front belt buckle

6 - Seat pan

7 - Outer seat trim

❏ → Rep. gr.72; Removing and installing outer seat trim

8 - Backrest adjustment handle

❏ → Rep. gr.72; Removing and installing backrest adjuster

Assembly overview – seat height adjustment, manual

Assembly overview – seat height adjustment, manual

Overview shown for left side of vehicle as an example

1 - Handle for seat height adjustment

❏ → Rep. gr.72; Removing and installing seat height adjustment handle

2 - Retaining clip

3 - Operating lever for seat height adjustment

4 - Bolt

❏ Qty. 3

❏ 10 N·m

5 - Adjuster

6 - Bolt

❏ Qty. 2

❏ 8 N·m

Assembly overview – seat height adjustment, electrical

Assembly overview – seat height adjustment, electrical

Overview is shown for left side of vehicle as an example.

1 - Bolt

❏ Qty. 3

❏ Renew after removing

❏ 6,5 N·m

2 - Driver seat height adjustment motor -V245-/front passenger seat height adjustment motor -V246-

❏ → Rep. gr.72; Removing and installing seat height adjustment unit, electrically adjustable

3 - Seat pan

Assembly overview - lumbar support

Assembly overview - lumbar support

Overview shown for left side of vehicle as an example

1 - Bolt

❏ 2 N·m

2 - Compressor for multicontour driver seat -V439-/compressor for multicontour front passenger seat -V440-

❏ Cannot be renewed individually

❏ → Rep. gr.72; Removing and installing lumbar support

3 - Outer backrest frame

4 - Bolt

❏ 6,5 N·m

5 - Wire

6 - Wire

7 - Lumbar support

❏ → Rep. gr.72; Removing and installing lumbar support

Assembly overview ? seat rake adjustment

Assembly overview ? seat rake adjustment

The overview is shown for the left side of vehicle as an example.

1 - Driver seat rake adjustment motor -V243-/front passenger seat rake adjustment motor -V244-

❏ → Rep. gr.72; Removing and installing seat rake adjustment motor [V243]/[V244]

2 - Bracket

3 - Bolt

❏ Qty. 2

❏ Renew after removing

❏ 10 N·m

4 - Adjustment spindle

5 - Bolt

❏ Renew after removing

❏ 20 N·m

Assembly overview - seat depth adjuster

Assembly overview - seat depth adjuster

1 - Seat depth adjuster mounting plate

❏ → Rep. gr.72; Removing and installing seat depth adjuster

2 - Bolt

❏ Qty. 4

❏ 6 N·m

3 - Seat depth adjuster trim

❏ Renew after removing

❏ → Rep. gr.72; Removing and installing seat depth adjuster

4 - Seat depth adjustment handle

❏ Renew after removing

❏ → Rep. gr.72; Removing and installing seat depth adjuster

5 - Nut

❏ Qty. 4

❏ Renew after removing

❏ 6 N·m

Removing and installing front seat

Removing and installing front seat

Removal and installation are described for the left side of vehicle as an example.

Removing

– Move front seat to foremost and highest position.

– Unscrew bolts -1-.

– Move front seat to rearmost and lowest position.

– Unscrew bolts -2-.

– Fold front seat backwards.

– Switch off ignition and electrical equipment.

– Keep vehicle key and other entry and start authorisation devices (e.g. smartphone) outside vehicle.

– Disconnect battery → Electrical system; Rep. gr.27; Battery; Disconnecting and connecting battery.

– Open cover in floor covering.

CAUTION

It is possible to trigger pyrotechnic components unintentionally.

Risk of injury

– Discharge static electricity by briefly touching door striker plate.

– Disconnect electrical connectors.

NOTICE

Risk of damage to the front seat at lifting out or during transportation.

– Do not grab the front seat by attachments when lifting (e.g. belt buckle, seat longitudinal adjustment lever, seat height adjustment lever or seat trim).

– Use suitable means to protect attachments against damage.

Important

● The aid of an additional person is required for the subsequent work steps.

– Lift out front seat.

Installing

Install in reverse order of removal, observing the following:

– Insert front seat.

– First insert centring pin on front inner side -arrow-, and then insert centring pin on rear inner side -arrow-.

– Align seat rails.

Important

● Seat rails must have the same position in fastener.

– Align front seat.

– Connect electrical connector.

– Connect battery earth cable → Electrical system; Rep. gr.27; Battery; Disconnecting and connecting battery.

– Switch on ignition.

– Read and clear event memory using → Vehicle diagnostic tester.

NOTICE

Risk of damage to threads in the seat cross member mounting plate.

– Proceed with caution when screwing the bolts in.

– Screw in bolts -2- by hand.

– Move front seat to foremost and highest position.

– Screw in bolts -1- hand-tight.

– Tighten bolts -1-.

– Move front seat to rearmost and lowest position.

– Tighten bolts -2-.

Tightening torques

♦ → Rep. gr.72; Assembly overview – front seat

Removing and installing trim for backrest with integrated head restraint

Removing and installing trim for backrest with integrated head restraint

Trim for backrest with integrated head restraint is referred to hereafter as trim.

Removing

– Use a commercially available plastic wedge to unclip rear trim -1-.

– Unscrew bolts -2-.

– Remove retainers -1-.

– Unclip front trim -1-.

Installing

Install in reverse order of removal, observing the following:

– Push on trim until it can be heard to engage.

Tightening torques

♦ → Rep. gr.72; Assembly overview – front backrest, Top-Sport

Removing and installing seat longitudinal adjustment handle

Removing and installing seat longitudinal adjustment handle

Removal and installation are described for left side of vehicle as an example.

Removing

– Disconnect seat longitudinal adjustment handle -1- from handle mounting using commercially available rubber-headed hammer.

Installing

NOTICE

Risk of damage to seat longitudinal adjustment handle from excessive force.

– Drive off seat longitudinal adjustment handle carefully.

– Drive on seat longitudinal adjustment handle as far as stop using commercially available rubber-headed hammer.

Removing and installing seat height adjustment handle

Removing and installing seat height adjustment handle

Seat height adjustment handle is referred to hereafter as handle.

Removal and installation are described for the left-side of vehicle as an example.

Removing

– Pull handle -1- as far as possible upwards, and hold it there.

– Guide a commercially available screwdriver through handle -1- and outer seat trim -2- up to retaining clip -3-.

– Release retaining clip -3- using the commercially available screwdriver.

– Pull handle -1- in direction of -arrow- off seat height adjustment lever -4-.

Installing

Install in reverse order of removal, observing the following:

– Pull to check proper engagement.

Removing and installing seat height adjustment unit, manually adjustable

Removing and installing seat height adjustment unit, manually adjustable

Removal and installation are described for the left-side of vehicle as an example.

Removing

– Remove outer seat trim → Rep. gr.72; Removing and installing outer seat trim.

– Unscrew bolts -2-.

– Remove lever for seat height adjustment -1-.

– Take out the lock washer -2-.

– Unscrew bolts -1-.

– Remove seat height adjustment unit.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.72; Assembly overview - front seat, manual adjustment

Removing and installing seat rake adjustment unit

Removing and installing seat rake adjustment unit

Driver seat rake adjustment motor -V243- and front passenger seat rake adjustment motor -V244- will henceforth be referred to as “seat rake adjustment motor”.

Removal and installation are described for left side of vehicle as an example.

Removing

– → Rep. gr.72; Secure front seat to seat repair stand.

– Disconnect electrical connector -5-.

– Unscrew bolt -3- for adjuster spindle -1- of seat rake adjustment motor -4-.

– Unscrew bolts -2-.

– Remove seat rake adjustment motor -4-.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.72; Assembly overview – seat rake adjustment

Removing and installing front backrest

Removing and installing front backrest

Removing

– Remove front seat → Rep. gr.72; Removing and installing front seat.

– Remove inner seat trim → Rep. gr.72; Removing and installing inner seat trim.

– Remove outer seat trim → Rep. gr.72; Removing and installing outer seat trim.

– Disconnect electrical connector -3-.

– Unclip retaining clips -2- of electrical wire -1- on seat pan.

– Guide out electrical wire -1- leading to side airbag on front outer side from braided sleeving.

Driver seat

– Guide out electrical wire leading to side airbag on front inner side from braided sleeving.

All vehicles (continued)

– Remove bolts -1-, -2-, -3- and-4-.

– Tilt front backrest -5- forwards.

– Push seat pan padding to one side.

– Pull out electrical wire for side airbag on front outer side from seat pan.

Driver seat

– Pull out electrical wire for side airbag on front inner side from seat pan.

All vehicles (continued)

– Remove front backrest.

Installing

Install in reverse order of removal, observing the following:

– Route electrical wire so that original wiring layout is restored.

Tightening torques

♦ → Rep. gr.72; Assembly overview – front backrest

Removing and installing head restraint

Removing and installing head restraint

Removing

– Move front seat to foremost and lowest position.

– Tilt front backrest 45° forwards.

Note

The head restraint release button -arrow- is located 9 cm below the upper edge of the backrest on the head restraint guide -2-.

– Press head restraint release button -arrow-, and pull out head restraint -1-.

Installing

Install in reverse order of removal, observing the following:

– Push head restraint as far as possible downwards.

Removing and installing integrated head restraint

Removing and installing integrated head restraint

Removing

– Separate backrest cover from backrest padding → Rep. gr.74; Separating backrest cover from backrest padding.

– Press head restraint release button -arrow- and pull out integrated head restraint -1-.

Installing

Install in reverse order of removal, observing the following:

– Push integrated head restraint downwards until it can be heard to engage.

Removing and installing head restraint guide

Removing and installing head restraint guide

Removing

– Remove backrest cover and padding → Rep. gr.74; Removing and installing backrest cover and padding.

Vehicles with Top-Sport seat

– Remove integrated head restraint → Rep. gr.72; Removing and installing integrated head restraint.

All vehicles (continued)

– Unscrew bolts -2-.

– Release locking devices -2-.

– Push head restraint guide -1- in direction of -arrow A-, and pull it out in direction of -arrow B-.

Installing

Install in reverse order of removal, observing the following:

Important

● Two lower locking devices must engage fully with backrest frame.

Tightening torques

♦ → Rep. gr.72; Assembly overview – head restraint

Removing and installing lumbar support adjustment switch E176/E177

Removing and installing lumbar support adjustment switch E176/E177

Removing

Driver seat lumbar support adjustment switch -E176- and front passenger seat lumbar support adjustment switch -E177- will henceforth be referred to as “lumbar support adjustment switch”.

Removal and installation are described for left side of vehicle as an example.

– Remove outer seat trim → Rep. gr.72; Removing and installing outer seat trim.

– Unscrew bolts -1-.

– Disconnect electrical connector.

– Remove lumbar support adjustment switch -2-.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.72; Assembly overview – seat pan

Removing and installing backrest adjuster

Removing and installing backrest adjuster

Special tools and workshop equipment required

♦ assembly tool -3399-

Removal and installation are described for the left-side of vehicle as an example.

Removing

– Turn backrest adjuster -1- until detent -arrow A- is visible.

– Insert assembly tool -3399- -2- and lever backrest adjuster -1- in direction of -arrow B-.

– Turn backrest adjuster -1- 120° further.

– Insert assembly tool -3399- -2- and lever backrest adjuster -1- in direction of -arrow B-.

– Detach backrest adjuster -1-.

Installing

Install in reverse order of removal, observing the following:

– Check whether backrest adjuster is firmly attached by pulling on it.

Securing front seat to seat repair stand

Securing front seat to seat repair stand

Special tools and workshop equipment required

♦ bracket for seat repairs -VAS 6136-

♦ engine and gearbox bracket -VAS 6095A-

♦ seat repair adapter -VAS 6136/1-

– Remove front seat → Rep. gr.72; Removing and installing front seat.

– Attach bracket for seat repairs -VAS 6136--B- to engine and gearbox bracket -VAS 6095A--A-.

– Secure front seat -1- with seat repair adapter -VAS 6136/1--C- to bracket for seat repairs -VAS 6136--B-.

Tightening torques

♦ → Rep. gr.72; Assembly overview – front seat

Removing and installing lumbar support

Removing and installing lumbar support

Compressor for multicontour driver seat -V439- or compressor for multicontour front passenger seat -V440- will henceforth be referred to as “compressor for multicontour seat”.

Removal and installation are described for left side of vehicle as an example.

Removing

– Remove backrest cover and padding → Rep. gr.74; Removing and installing backrest cover and padding.

– Unscrew bolt -3-.

– Disconnect electrical connector from compressor for multicontour seat -1-.

– Detach compressor for multicontour seat -1- from outer backrest frame -2-.

– Unscrew bolt -4-.

– Guide out wires -2- and -3-.

– Remove lumbar support -1- along with compressor for multicontour seat.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.72; Assembly overview - lumbar support

Removing and installing seat adjustment operating unit [E470]/[E471]

Removing and installing seat adjustment operating unit [E470]/[E471]

Special tools and workshop equipment required

♦ release tool -T10236-

Removing

Driver seat adjustment operating unit -E470- and front passenger seat adjustment operating unit -E471- are referred to hereafter as seat adjustment operating unit.

Removal and installation are described for left side of vehicle as an example.

– Remove outer seat trim → Rep. gr.72; Removing and installing outer seat trim.

– Lever off buttons -3- and -4- using release tool -T10236-.

– Unscrew bolts -2-.

– Remove seat adjustment operating unit -1-.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.72; Assembly overview – seat pan

Removing and installing bracket for seat trim

Removing and installing bracket for seat trim

Removal and installation are described for the left-side of vehicle as an example.

Removing

– Remove outer seat trim → Rep. gr.72; Removing and installing outer seat trim.

– Unscrew bolts -2-.

– Detach seat trim bracket -1- in direction of -arrow-, and remove it from front seat -3-.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.72; Assembly overview – seat pan

Removing and installing inner seat trim

Removing and installing inner seat trim

Removal and installation are described for the left side of vehicle as an example.

Removing

– Remove front seat → Rep. gr.72; Removing and installing front seat.

– Press clamping pin in spreader rivet -1- inwards.

– Lever off spreader rivet -1- using commercially available plastic wedge.

– Release fastener -arrow-.

– Remove inner seat trim -2- towards rear.

Installing

Install in reverse sequence of removal.

Removing and installing outer seat trim

Removing and installing outer seat trim

Removal and installation are described for the left side of vehicle as an example.

Removing

– Move front seat to foremost and highest position.

Manually adjustable front seat

– Remove backrest adjustment handle → Rep. gr.72; Removing and installing backrest adjustment handle.

– Remove height adjustment handle → Rep. gr.72; Removing and installing height adjustment handle.

All vehicles (continued)

– Press clamping pin in spreader rivet -2- inwards.

– Lever off spreader rivet -2- using commercially available plastic wedge.

– Open locking element -4-.

– Release fasteners -arrows-.

– Detach outer seat trim -1- from seat trim bracket -2-.

Electrically adjustable front seat

– Disconnect electrical connectors.

All vehicles (continued)

Installing

Install in reverse sequence of removal.

Removing and installing outer seat trim, front passenger seat without height adjustment

Removing and installing outer seat trim, front passenger seat without height adjustment

Removing

Removal and installation are described for a left-hand drive vehicle as an example.

– Move front seat to foremost position.

– Remove backrest adjustment handle → Rep. gr.72; Removing and installing backrest adjustment handle.

– Unscrew bolt -2-.

– Press clamping pin in spreader rivet -3- inwards.

– Lever off spreader rivet -3- using commercially available plastic wedge.

– Detach mounting points -2-.

– Remove outer seat trim -1-.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.72; Assembly overview – seat pan

Removing and installing seat longitudinal adjustment motor [V28]/[V31]

Removing and installing seat longitudinal adjustment motor [V28]/[V31]

The driver seat longitudinal adjustment motor -V28- and front passenger seat longitudinal adjustment motor -V31-are removed together with the lower seat pan frame.

The driver seat longitudinal adjustment motor -V28- and front passenger seat longitudinal adjustment motor -V31- will henceforth be referred to as “seat longitudinal adjustment motor”.

Removal and installation are described for the left side of vehicle as an example.

Removing

– Remove front belt buckle → Rep. gr.69; Removing and installing front belt buckle.

– Disconnect electrical connector of seat longitudinal adjustment motor.

– Unclip electrical wire from lower seat pan frame -3-, and lay it to one side.

– Unscrew left-hand threaded bolt -2-.

– Remove seat pan -1-.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.72; Assembly overview – seat pan

Removing and installing seat depth adjuster

Removing and installing seat depth adjuster

Removal and installation are described for left side of vehicle as an example.

Removing

– → Rep. gr.72; Secure front seat to seat repair stand.

– Remove seat adjustment control unit → Rep. gr.72; Removing and installing seat adjustment control unit.

– Move seat depth adjuster to foremost position.

– Release fasteners -arrows- using commercially available plastic wedge.

– Detach seat depth adjuster trim -2-.

– Unclip seat depth adjuster handle -1-.

– Detach seat pan cover -1- from front profile in direction of -arrow-.

– Unscrew nuts -3-.

– Release fasteners -4-.

– Release seat depth adjuster -1- from seat pan -2-.

– Fold seat depth adjuster -1- upwards.

– Disconnect electrical wire of seat heating element.

– Release cover from side fasteners -2- in direction of -arrow-.

– Detach fasteners -arrows- using commercially available plastic wedge.

– Unclip padding -1- from seat depth adjuster -2-.

– Remove seat depth adjustment unit -2-.

Installing

Install in reverse order of removal, observing the following:

Tightening torques

♦ → Rep. gr.72; Assembly overview - seat depth adjuster

Removing and installing seat adjustment control unit

Removing and installing seat adjustment control unit

Control unit for seat and steering column adjustment with memory function -J136- and control unit for front passenger seat adjustment with memory function -J521- will henceforth be referred to as “seat adjustment control unit”.

Removing

– → Rep. gr.72; Secure front seat to seat repair stand.

– Unclip electrical wire from retainer -2-.

– Disconnect electrical connectors -3-.

– Unclip seat adjustment control unit -1- at retaining tabs -arrows-.

– Detach seat adjustment control unit -1- in direction of -arrow A-.

Installing

Install in reverse order of removal, observing the following:

– Route electrical wire so that original wiring layout is restored.

Removing and installing operating unit for memory settings [E464]/[E465]

Removing and installing operating unit for memory settings [E464]/[E465]

The driver operating unit for memory settings -E464- and front passenger operating unit for memory settings -E465- will henceforth be referred to as “operating unit for memory settings”.

Removal and installation are described for the driver side as an example.

Removing

– Remove outer seat trim → Rep. gr.72; Removing and installing outer seat trim.

– Release locking devices -2-.

– Remove operating unit for memory settings -1-.

Installing

Install in reverse order of removal, observing the following:

– The operating unit for memory settings must be heard to engage.

Removing and installing wiring harness for seat frame

Removing and installing wiring harness for seat frame

Special tools and workshop equipment required

♦ release tool -T10236-

♦ setting gauge -3371-

If electrical wires are disconnected or removed and installed, it is useful to make corresponding drawings or photos. This guarantees that everything is re-installed in its original position.

Driver side seat position sensor -G553- and front passenger side seat position sensor -G554- are referred to hereafter as seat position sensor.

Removal and installation are described for left side of vehicle as an example.

Removing

– → Rep. gr.72; Secure front seat to seat repair stand.

Vehicles with seat position sensor

– Unscrew bolt -2-.

– Detach seat position sensor -1-.

All vehicles (continued)

– Separate electrical connectors.

– Use release tool -T10236- to unclip electrical wires.

– Guide wiring harness for seat frame out of front seat, and remove it.

Installing

Install in reverse order of removal, observing the following:

– Route electrical wire so that original wiring layout is restored.

Vehicles with seat position sensor

– Engage seat position sensor -1- in lower seat pan frame.

– Place 4 mm plate from setting gauge -3371- -4- between seat position sensor -1- and lower seat pan frame.

– Tighten bolt -2-.

– Remove setting gauge -3371- -4-.

All vehicles (continued)

Tightening torques

♦ → Rep. gr.72; Assembly overview – seat pan