Electric drive EIP220, EIA200, EIA210. Technical data

In this manual: Electric drive EIP220, EIA200, EIA210. Technical data
Technical data. Panel gaps - front — 1Body front. Lock carrier — 1Body front. Wings — 1Body front. Bulkhead — 1Bonnet, flaps, cab, central locking. Bonnet — 1Bonnet, flaps, cab, central locking. Rear lid — 1Bonnet, flaps, cab, central locking. Charging flap unit — 1Front door, central locking. Door — 1Front door, central locking. Door components — 1Front door, central locking. Central locking — 1Rear door,sliding door,wing doors,central locking. Door — 1Rear door,sliding door,wing doors,central locking. Door components — 1Sliding roof. Sliding sunroof — 1Bumper. Bumper, front — 1Bumper. Bumper, rear — 1Glazing & window mechanism. Repair notes — 1Glazing & window mechanism. Windscreen — 1Glazing & window mechanism. Rear windscreen — 1Glazing & window mechanism. Side windows — 1Glazing & window mechanism. Door windows — 1Exterior equipment. Spoiler — 1Exterior equipment. Mouldings, trims, extensions — 1Exterior equipment. Underbody cladding — 1Exterior equipment. Roof moulding and roof railing — 1Exterior equipment. Exterior mirror — 1Exterior equipment. Wheel housing liner — 1Exterior equipment. Lettering and emblems — 1Exterior equipment. Bicycle carrier — 1Exterior equipment. Trim film and protective film — 1Interior equipment. Compartments & covers — 1Interior equipment. Equipment — 1Interior equipment. Centre console — 1Interior equipment. Front centre armrest — 1Interior equipment. Interior mirror — 1Passenger protection. Seat belts — 1Passenger protection. Child seat anchors — 1Passenger protection. Airbag system — 1Passenger protection. Airbag control unit — 1Passenger protection. Front airbag, driver side — 1Passenger protection. Front passenger airbag — 1Passenger protection. Side airbags — 1Passenger protection. Curtain airbags — 1Passenger protection. Airbag crash sensors — 1Passenger protection. Seat occupied recognition — 1Trim, noise insulation. Front door trims — 1Trim, noise insulation. Rear door trims — 1Trim, noise insulation. Dash panel — 1Trim, noise insulation. Central tube for dash panel — 1Trim, noise insulation. Interior trims — 1Trim, noise insulation. Roof trims — 1Trim, noise insulation. Luggage compartment trims — 1Seat frames. Overview of seat variants — 1Seat frames. Front seats — 1Seat frames. Rear seats — 1Seat padding, covers. Front seat covers and padding — 1Seat padding, covers. Rear seat covers and padding — 1Vehicle-specific paintwork information. Explanation of symbols — 1Vehicle-specific paintwork information. Paintwork structure — 1Vehicle-specific paintwork information. Areas exposed to stone chipping — 1Vehicle-specific paintwork information. Masked sectors — 1Vehicle-specific paintwork information. Seam sealing — 1Vehicle-specific paintwork information. Underseal — 1Vehicle-specific paintwork information. Cavity sealing — 1Vehicle-specific paintwork information. Contrasting colours — 1Vehicle-specific paintwork information. Paintwork repair — 1Technical data. Acoustic considerations during vehicle development — 1Technical data. General procedure for identifying noises — 1Technical data. Volkswagen equipment for localising noises — 1Technical data. Borescope VAS 6748A — 1Technical data. Causes — 1Technical data. Locating water ingress — 1Technical data. Attachments — 1Technical data. Vehicle identification data — 1Technical data. Safety information — 1Technical data. Body parts and materials — 1Technical data. Alignment jig — 1Body front. Longitudinal member cross panel — 1Body front. Longitudinal member — 1Body front. Front wheel housing — 1Body centre, roof, frame. Roof — 1Body centre, roof, frame. A-pillar — 1Body centre, roof, frame. B-pillar — 1Body centre, roof, frame. Side member — 1Body, rear. Rear cross member — 1Body, rear. Rear cross panel — 1Body, rear. Luggage compartment floor — 1Body, rear. Rear longitudinal member — 1Body, rear. Side panel — 1Body, rear. Rear wheel housing — 1General information, Body. Basic information on body repairs — 1General information, Body. Explanation of symbols — 1General information, Body. Overview of materials used — 1General information, Body. Joining and separating techniques — 1General information, Body. Surface repair — 1General information, Body. Corrosion protection — 1General information, Body. Noise insulation — 1General information, Body. Plastic repair — 1General information, Body. Welding plastic attachments — 1General information, Body. General notes – windows — 1General information, Body. Glass repair — 1General information, Body. Use of adhesives — 1General information, Body. Self-adhesive components — 1General information, Body. Noises — 1General information, Body. Preparing for disposal — 1General information, Body. Leaks — 1General information, paint. Safety information — 1General information, paint. General information — 1Genuine products. Filler — 1Genuine products. Priming metal — 1Genuine products. Priming plastic materials — 1Genuine products. Surfacer — 1Genuine products. 2-pack top coats — 1Repair painting work. Paint finish – decorative strips and films — 1Repair painting work. Tips and tricks — 1Air conditioner. Overview of fitting locations — 1Air conditioner. Refrigerant circuit — 1Air conditioner. Valve unit of heat pump — 1Air conditioner. Air conditioner compressor — 1Air conditioner. Control motors — 1Air conditioner. Front heater and air conditioning unit — 1Air conditioner. Air duct — 1Air conditioner. Coolant circuit — 1Air conditioner. Other controlling and regulating components — 1Air conditioner. Air quality improvement system — 11-speed gearbox 0MH, rear, EQ310. Technical data — 11-speed gearbox 0MH, rear, EQ310. Gearbox mechanics,operation, construction,diff — 11-speed gearbox 0MH, rear, EQ310. Final drive, differential, differential lock — 1General information. High voltage — 1Electric drive EIP220, EIA200, EIA210. Technical data — 1Electric drive EIP220, EIA200, EIA210. Engine assy,cylinder block,crankcase — 1Electric drive EIP220, EIA200, EIA210. Engine cooling — 1Electric drive. High-voltage components, charging unit and voltage converter — 1Electric drive. Warning stickers — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing without wax — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing with wax — 1Electric drive. Power and control electronics for electric drive — 1Electric drive. Electric drive motor — 1Electric drive. Motor control unit — 1Electric drive. De-energising high-voltage system — 1Electric drive. Re-energise high-voltage system — 1Electric drive. Potential equalisation lines — 1Electric drive. Charging socket, with charging cable — 1Electric drive. Charging socket, with separate charging cable — 1Electric drive. Charging unit for high-voltage battery — 1Electric drive. Charging unit for high-voltage battery, with integrated voltage converter — 1Electric drive. Vehicle noise & engine sound — 1Electric drive. Accelerator pedal — 1Electric drive. Voltage converter — 1Electric drive. High-voltage cables, all-wheel drive — 1Electric drive. High-voltage cables, rear-wheel drive — 1Front suspension, drive shafts. Front axle — 1Front suspension, drive shafts. Subframe — 1Front suspension, drive shafts. Suspension strut, upper suspension link — 1Front suspension, drive shafts. Lower suspension link, swivel joint — 1Front suspension, drive shafts. Wheel bearing — 1Front suspension, drive shafts. Anti-roll bar — 1Rear suspension, drive shaft. Rear axle — 1Rear suspension, drive shaft. Subframe — 1Rear suspension, drive shaft. Anti-roll bar — 1Rear suspension, drive shaft. Suspension link, track rod — 1Rear suspension, drive shaft. Suspension strut, shock absorber, spring — 1Rear suspension, drive shaft. Wheel bearing assembly, trailing arm — 1Rear suspension, drive shaft. Drive shaft — 1Self-levelling air spring system. Electronically controlled damping — 1Self-levelling air spring system. Vehicle level sender — 1Wheels, tyres. axle align. Wheel alignment — 1Wheels, tyres. axle align. Wheels, tyres — 1Steering. Steering wheel — 1Steering. Steering column — 1Steering. Steering rack — 1Brake system. Technical data — 1ABS, ADR, TCS, EDL, ESP. Overview of fitting locations — 1ABS, ADR, TCS, EDL, ESP. Control unit and hydraulic unit — 1ABS, ADR, TCS, EDL, ESP. Sensors — 1Brake, brake mechanics. Front brake — 1Brake, brake mechanics. Rear brake — 1Brake, brake mechanics. Parking brake — 1Brake, brake mechanics. Brake pedal — 1Brakes, hydraulics, regulator, servo. Brake servo and brake master cylinder — 1Brakes, hydraulics, regulator, servo. Hydraulic system — 1Wheels and Tyres Guide. Wheels, tyres. axle align — 1Wheels, tyres. axle align. Instructions on using the guide — 1Wheels, tyres. axle align. Legislative and technical conditions — 1Wheels, tyres. axle align. Wheel change — 1Wheels, tyres. axle align. Fitting tyre — 1Wheels, tyres. axle align. Wheel bolts — 1Wheels, tyres. axle align. Information on tyres — 1Wheels, tyres. axle align. Handling problems — 1Wheels, tyres. axle align. Evaluating tyres — 1Wheels, tyres. axle align. Tyre wear — 1Starter-current supply-CC. Battery — 1Instruments, GCI. Dash panel insert — 1Instruments, GCI. Horn — 1Windscreen wipewash system. Windscreen wiper system — 1Windscreen wipewash system. Windscreen washer system — 1Windscreen wipewash system. Rear window wiper system — 1Windscreen wipewash system. Rear window washer system — 1Lights, lamps, switches outside. LED headlight — 1Lights, lamps, switches outside. LED matrix headlight — 1Lights, lamps, switches outside. Tail lights — 1Lights, lamps, switches outside. Lights in exterior mirror — 1Lights, lamps, switches outside. Number plate light — 1Lights, lamps, switches outside. Entry and start authorisation system — 1Lights, lamps, switches outside. Steering column switch module — 1Lights, lamps, switches outside. Towing bracket — 1Lights, lamps, switches inside, anti-theft system. Lights — 1Lights, lamps, switches inside, anti-theft system. Controls — 1Lights, lamps, switches inside, anti-theft system. Anti-theft alarm system — 1Lights, lamps, switches inside, anti-theft system. Cigarette lighter, socket — 1Wiring. Relay carriers, fuse holders, electronics boxes — 1Wiring. Control units — 1Infotainment. Componentscontrol units — 1Infotainment. Multifunction steering wheel — 1Driver assist systems. Senders, sensors, control units — 1Driver assist systems. Adaptive cruise control — 1Driver assist systems. Reversing camera system — 1Driver assist systems. Front camera for driver assist systems — 1Driver assist systems. Overhead view camera — 1Electrical system. Starter-current supply-CC — 1Electrical system. Windscreen wipe and wash system — 1Wiring. Wires and lines — 1
~10min read
1special tools
  • Motor designation
  • Access to diagnoses
  • Hazard classification for high-voltage system

Motor designation

Motor designation

Motor designation, rear

The motor designation -A- is located on the right-hand side of the motor.

The following information is shown on the motor:

1 - Motor code

2 - Motor number

3 - Factory

4 - Production date: year/month/day

5 - Not relevant

6 - Drive number

Motor designation, front motor, all-wheel drive

The motor designation is located on the right-hand side of the motor.

The following information is shown on the motor:

1 - Gearbox code

2 - Motor code

3 - Motor number

4 - Manufacturer

5 - Factory

6 - Production date: year/month/day

7 - Drive number

8 - Not relevant

Access to diagnoses

Access to diagnoses

♦ 1 – Fill/bleed cooling system

♦ 2 – Renew control motor for radiator roller blind -V711-/carry out adaption

♦ 3 – Power and control electronics for electric drive -JX1-, commissioning

♦ 4 – Power and control electronics 2 for electric drive -JX4-, commissioning

♦ 5 – Calibrate electric drive motor

♦ 6 – High-voltage components

1 – Fill/bleed cooling system

♦ Diagnosis-compatible systems

♦ 0001 - Motor electronics for electric drive

♦ 0001 - Motor electronics, functions

♦ 0001 - Fill/bleed cooling system

2 – Renew control motor for radiator roller blind -V711-/carry out adaption

♦ Diagnosis-compatible systems

♦ 0001 - Motor electronics for electric drive

♦ 0001 - Electrical components

♦ 0001 - Control motor for radiator roller blind

3 – Power and control electronics for electric drive -JX1-, commissioning

3.1

♦ Guided Functions

♦ 0025 - Immobiliser

♦ 0025 - Adapt immobiliser

3.2

♦ Guided Functions

♦ 0051 - Electric drive

♦ 0051 - Software configuration

4 – Power and control electronics 2 for electric drive -JX4-, commissioning

♦ Guided Functions

♦ 0025 - Immobiliser

♦ 0025 - Adapt immobiliser

5 – Calibrate electric drive motor

♦ Guided Functions

♦ 0051 - Electric drive

♦ 0051 – Calibrate electric drive motor

6 – High-voltage components

♦ Access to diagnosis is obtained via the guided function for the relevant component.

Hazard classification for high-voltage system

Hazard classification for high-voltage system

DANGER

The vehicle’s high-voltage system and the high-voltage battery are dangerous components that can cause burns or other injuries and even lead to a fatal electric shock.

– Any work on the high-voltage system, or on systems which could be indirectly affected by it, may only be carried out by properly trained and qualified expert personnel.

– In the event of queries or uncertainties regarding the terms "high-voltage technician" or "high-voltage expert", or those concerning the high-voltage system, the responsible importer must be contacted prior to the commencement of any work.

– Repair work must always be carried out in accordance with applicable laws and regulations, the state-of-the-art technology, any relevant accident prevention regulations (in Germany, including but not limited to the Information of the German Social Accident Insurance (DGUV) 209-093 – Qualification training for work on vehicles with high-voltage system), as well as this workshop manual.

– Only the HVT is authorised to certify that the high-voltage system has been de-energised.

– All work measures necessary for the vehicle may only be carried out by a person qualified to at least the level of electrically instructed person (EIP).

– Regardless of the work to be performed, visually inspect high-voltage components in the work area.

– High-voltage cables must not be overly bent or kinked.

– In the event of conspicuous findings or uncertainties, the high-voltage technician (HVT) or the high-voltage expert (HVE) must be consulted.

– Any work involving metal-removing, deforming and sharp-edged tools or heat sources such as welding, soldering, hot air, thermal bonding and infrared drying in the vicinity of high-voltage components and cables is prohibited. In this case the high-voltage system must be de-energised and the respective component removed or sufficiently protected.

– All listed work refers to the removal and installation or the renewal of the individual components.

– For regular maintenance work, the high-voltage system does not have to be de-energised.

For reasons of safety, the following activities must not be carried out during charging:

– Activities that prolong the charging process.

– Activities for which the vehicle must be de-energised and made safe in accordance with the ensuing hazard rating.

– Activities during which the vehicle is moved and electrical wires and connectors could be placed under strain (pulled).

– Activities during which the connected charging cable could present a danger of tripping and injury.

– Activities during which the charging cable could block work paths and emergency exit routes.

– Activities on the 12V battery.

The following activities may be carried out with the → Vehicle diagnostic tester during charging:

– The event memory and measured values may be read.

– The vehicle and control units may be identified.

Important

● Before work is carried out on the following components, the system must be de-energised by a high-voltage technician (HVT) or a high-voltage expert (HVE).

Explanation of qualifications

Qualification VolkswagenDGUV-I 209-093ScenarioEIP (person with electrical training)Chapter 2Induction training for non-electrical work (< 60 VDC)HVT (high-voltage technician)Chapter 3.1 bWorking on inherently safe HV production vehicles

♦ Vehicles are de-energised exclusively with certification.

♦ Complete contact protection in place. HVE level 1 (high-voltage expert)Chapter 3.2 bWorking on not inherently safe HV production vehicles

♦ Vehicles are also de-energised without certification or there is no complete contact protection in place, e.g. in the event of an accident. HVE level 2 (high-voltage expert)Chapter 3.3Work on live accumulators

♦ Working on parts supplied with voltage, inevitably with no contact protection, for fault finding, component replacement, etc.

Work on power unit

When working on the following components:Must the HVT de-energise high-voltage system before work is started?Minimum qualification: yes (manual power disconnect)yes (only diagnostic power disconnection)NoRemove and install power unit using

♦ Three-phase current drive -VX54-

♦ Gearbox

♦ Drive motor temperature sender/rotor position sender -G712-/-G713-

♦ Power and control electronics for electric drive -JX1- X EIP

Work on high-voltage system

When working on the following components:Must the HVT de-energise high-voltage system before work is started?Minimum qualification: yes (manual power disconnect)yes (only diagnostic power disconnection)NoPotential equalisation lines (earth) with connection to HV components X HVTMeasure insulation resistance X HVTMaintenance connector for high-voltage system (service connector, service disconnector) XEIPPX – high-voltage cables (orange) in vehicle X HVT

Work on heating and air conditioning system

When working on the following components:Must the HVT de-energise high-voltage system before work is started?Minimum qualification: yes (manual power disconnect)yes (only diagnostic power disconnection)No Air conditioner compressor -VX81- X EIP High-voltage heater (PTC) -Z115- X EIP PTC heater element 3 -Z132- X EIPWork on heating and air conditioning system in vehicle interior XEIPRefrigerant lines in the vehicle periphery (work which is not directly on the AC compressor and can be carried out without opening the refrigerant circuit, e.g. loosening and securing refrigerant lines) XEIPAir conditioning performance test (for checking the pressure levels in the refrigerant circuit by means of air conditioning service equipment) XEIPRefrigerant lines directly on the AC compressor XEIPExtract, evacuate or fill refrigerant XEIPAir intake box of heater and air conditioning unit X EIP

Work on charging connection

When working on the following components:Must the HVT de-energise high-voltage system before work is started?Minimum qualification: yes (manual power disconnect)yes (only diagnostic power disconnection)No High-voltage battery charging socket 1 -UX4- with

♦ Temperature sender for charging socket 1 -G853-

♦ Actuator for high-voltage charging socket lock 1 -F498-

♦ Manual release mechanism for charging connector X EIP

Working on charging unit and voltage converter

When working on the following components:Must the HVT de-energise high-voltage system before work is started?Minimum qualification: yes (manual power disconnect)yes (only diagnostic power disconnection)No Charging unit 1 for high-voltage battery -AX4-
With control unit for high-voltage battery charging unit -J1050- with voltage converter -A19- X EIP Voltage converter -A19- X EIP

Work on high-voltage battery

When working on the following components:Must the HVT de-energise high-voltage system before work is started?Minimum qualification: yes (manual power disconnect)yes (only diagnostic power disconnection)No Removing and installing high-voltage battery 1 -AX2- X HVTDisconnect high voltage system connection X HVTDisconnect low-voltage connection of high-voltage battery XEIP

Work in high-voltage battery

When working on the following components:Must the HVT de-energise high-voltage system before work is started?Minimum qualification: yes (manual power disconnect)yes (only diagnostic power disconnection)No Switching unit for high-voltage battery, positive terminal -SX8- and switching unit for high-voltage battery, negative terminal -SX7- (battery removed) HVE Open high-voltage battery 1 -AX2- (battery removed) HVE Bond high-voltage battery 1 -AX2- (battery removed) HVE Battery module 1 -J991- and other battery modules (battery removed) HVE Battery regulation control unit -J840- HVEBattery modules control unit HVEBattery modules cover HVE

Work on accident vehicles

When working on the following components:Must the HVT de-energise high-voltage system before work is started?Minimum qualification: yes (manual power disconnect)yes (only diagnostic power disconnection)NoPreliminary evaluation of degree of danger HVTBody work (with straightening jig)X EIPPaint vehicle – observe instructions in paint manual XEIP

Work in vicinity of high-voltage components

When working on the following components or for following work:Must the HVT de-energise high-voltage system before work is started?Minimum qualification: yes (manual power disconnect)yes (only diagnostic power disconnection)NoBody work (assembly work as well as glass and dent repairs) XEIPSteering rack X EIPFront subframe X EIPFront brakes XEIPRear brakes XEIPBrake servo XEIPRemoving and installing rear axle X EIPLowering rear axle XEIPSuspension strut/shock absorber, spring XEIPSuspension link, track rod XEIPUnderbody cladding XEIPWhen welding, cover high-voltage components and visually inspect afterwardsX EIPWork involving metal-removing, deforming and sharp-edged tools or heat sources such as welding, soldering, hot air, thermal bonding and infrared drying in the vicinity of high-voltage components and cablesX EIPControl units and electric components of 12-V system; refer to Workshop Manual XEIP Battery -A-, refer to Workshop Manual XEIPHeadlights XEIP

General work

When working on the following components:De-energise high-voltage system before work is started?Minimum qualification: yes (manual power disconnect)yes (only diagnostic power disconnection)NoDrain and fill fluids (coolant and oils) XEIPCoolant circuit and coolant expansion tank XEIPChange tyres XEIPMiscellaneous work on 12 V system; refer to Workshop Manual XEIPWork on earth points of 12 V system (without potential equalisation lines) XEIPTail light clusters XEIPRenew/repair windows XEIPRepairs in vehicle interior XEIPRepairs in roof area XEIPRepairs on rear lid XEIPRepairs on bumpers XEIPRepair work on lock carrier XEIPMove lock carrier to service position XEIPRemoving and installing lock carrier XEIP