Steering. Steering rack

In this manual: Steering. Steering rack
Technical data. Panel gaps - front — 1Body front. Lock carrier — 1Body front. Wings — 1Body front. Bulkhead — 1Bonnet, flaps, cab, central locking. Bonnet — 1Bonnet, flaps, cab, central locking. Rear lid — 1Bonnet, flaps, cab, central locking. Charging flap unit — 1Front door, central locking. Door — 1Front door, central locking. Door components — 1Front door, central locking. Central locking — 1Rear door,sliding door,wing doors,central locking. Door — 1Rear door,sliding door,wing doors,central locking. Door components — 1Sliding roof. Sliding sunroof — 1Bumper. Bumper, front — 1Bumper. Bumper, rear — 1Glazing & window mechanism. Repair notes — 1Glazing & window mechanism. Windscreen — 1Glazing & window mechanism. Rear windscreen — 1Glazing & window mechanism. Side windows — 1Glazing & window mechanism. Door windows — 1Exterior equipment. Spoiler — 1Exterior equipment. Mouldings, trims, extensions — 1Exterior equipment. Underbody cladding — 1Exterior equipment. Roof moulding and roof railing — 1Exterior equipment. Exterior mirror — 1Exterior equipment. Wheel housing liner — 1Exterior equipment. Lettering and emblems — 1Exterior equipment. Bicycle carrier — 1Exterior equipment. Trim film and protective film — 1Interior equipment. Compartments & covers — 1Interior equipment. Equipment — 1Interior equipment. Centre console — 1Interior equipment. Front centre armrest — 1Interior equipment. Interior mirror — 1Passenger protection. Seat belts — 1Passenger protection. Child seat anchors — 1Passenger protection. Airbag system — 1Passenger protection. Airbag control unit — 1Passenger protection. Front airbag, driver side — 1Passenger protection. Front passenger airbag — 1Passenger protection. Side airbags — 1Passenger protection. Curtain airbags — 1Passenger protection. Airbag crash sensors — 1Passenger protection. Seat occupied recognition — 1Trim, noise insulation. Front door trims — 1Trim, noise insulation. Rear door trims — 1Trim, noise insulation. Dash panel — 1Trim, noise insulation. Central tube for dash panel — 1Trim, noise insulation. Interior trims — 1Trim, noise insulation. Roof trims — 1Trim, noise insulation. Luggage compartment trims — 1Seat frames. Overview of seat variants — 1Seat frames. Front seats — 1Seat frames. Rear seats — 1Seat padding, covers. Front seat covers and padding — 1Seat padding, covers. Rear seat covers and padding — 1Vehicle-specific paintwork information. Explanation of symbols — 1Vehicle-specific paintwork information. Paintwork structure — 1Vehicle-specific paintwork information. Areas exposed to stone chipping — 1Vehicle-specific paintwork information. Masked sectors — 1Vehicle-specific paintwork information. Seam sealing — 1Vehicle-specific paintwork information. Underseal — 1Vehicle-specific paintwork information. Cavity sealing — 1Vehicle-specific paintwork information. Contrasting colours — 1Vehicle-specific paintwork information. Paintwork repair — 1Technical data. Acoustic considerations during vehicle development — 1Technical data. General procedure for identifying noises — 1Technical data. Volkswagen equipment for localising noises — 1Technical data. Borescope VAS 6748A — 1Technical data. Causes — 1Technical data. Locating water ingress — 1Technical data. Attachments — 1Technical data. Vehicle identification data — 1Technical data. Safety information — 1Technical data. Body parts and materials — 1Technical data. Alignment jig — 1Body front. Longitudinal member cross panel — 1Body front. Longitudinal member — 1Body front. Front wheel housing — 1Body centre, roof, frame. Roof — 1Body centre, roof, frame. A-pillar — 1Body centre, roof, frame. B-pillar — 1Body centre, roof, frame. Side member — 1Body, rear. Rear cross member — 1Body, rear. Rear cross panel — 1Body, rear. Luggage compartment floor — 1Body, rear. Rear longitudinal member — 1Body, rear. Side panel — 1Body, rear. Rear wheel housing — 1General information, Body. Basic information on body repairs — 1General information, Body. Explanation of symbols — 1General information, Body. Overview of materials used — 1General information, Body. Joining and separating techniques — 1General information, Body. Surface repair — 1General information, Body. Corrosion protection — 1General information, Body. Noise insulation — 1General information, Body. Plastic repair — 1General information, Body. Welding plastic attachments — 1General information, Body. General notes – windows — 1General information, Body. Glass repair — 1General information, Body. Use of adhesives — 1General information, Body. Self-adhesive components — 1General information, Body. Noises — 1General information, Body. Preparing for disposal — 1General information, Body. Leaks — 1General information, paint. Safety information — 1General information, paint. General information — 1Genuine products. Filler — 1Genuine products. Priming metal — 1Genuine products. Priming plastic materials — 1Genuine products. Surfacer — 1Genuine products. 2-pack top coats — 1Repair painting work. Paint finish – decorative strips and films — 1Repair painting work. Tips and tricks — 1Air conditioner. Overview of fitting locations — 1Air conditioner. Refrigerant circuit — 1Air conditioner. Valve unit of heat pump — 1Air conditioner. Air conditioner compressor — 1Air conditioner. Control motors — 1Air conditioner. Front heater and air conditioning unit — 1Air conditioner. Air duct — 1Air conditioner. Coolant circuit — 1Air conditioner. Other controlling and regulating components — 1Air conditioner. Air quality improvement system — 11-speed gearbox 0MH, rear, EQ310. Technical data — 11-speed gearbox 0MH, rear, EQ310. Gearbox mechanics,operation, construction,diff — 11-speed gearbox 0MH, rear, EQ310. Final drive, differential, differential lock — 1General information. High voltage — 1Electric drive EIP220, EIA200, EIA210. Technical data — 1Electric drive EIP220, EIA200, EIA210. Engine assy,cylinder block,crankcase — 1Electric drive EIP220, EIA200, EIA210. Engine cooling — 1Electric drive. High-voltage components, charging unit and voltage converter — 1Electric drive. Warning stickers — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing without wax — 1Electric drive. High-voltage battery unit, edge of upper part of battery housing with wax — 1Electric drive. Power and control electronics for electric drive — 1Electric drive. Electric drive motor — 1Electric drive. Motor control unit — 1Electric drive. De-energising high-voltage system — 1Electric drive. Re-energise high-voltage system — 1Electric drive. Potential equalisation lines — 1Electric drive. Charging socket, with charging cable — 1Electric drive. Charging socket, with separate charging cable — 1Electric drive. Charging unit for high-voltage battery — 1Electric drive. Charging unit for high-voltage battery, with integrated voltage converter — 1Electric drive. Vehicle noise & engine sound — 1Electric drive. Accelerator pedal — 1Electric drive. Voltage converter — 1Electric drive. High-voltage cables, all-wheel drive — 1Electric drive. High-voltage cables, rear-wheel drive — 1Front suspension, drive shafts. Front axle — 1Front suspension, drive shafts. Subframe — 1Front suspension, drive shafts. Suspension strut, upper suspension link — 1Front suspension, drive shafts. Lower suspension link, swivel joint — 1Front suspension, drive shafts. Wheel bearing — 1Front suspension, drive shafts. Anti-roll bar — 1Rear suspension, drive shaft. Rear axle — 1Rear suspension, drive shaft. Subframe — 1Rear suspension, drive shaft. Anti-roll bar — 1Rear suspension, drive shaft. Suspension link, track rod — 1Rear suspension, drive shaft. Suspension strut, shock absorber, spring — 1Rear suspension, drive shaft. Wheel bearing assembly, trailing arm — 1Rear suspension, drive shaft. Drive shaft — 1Self-levelling air spring system. Electronically controlled damping — 1Self-levelling air spring system. Vehicle level sender — 1Wheels, tyres. axle align. Wheel alignment — 1Wheels, tyres. axle align. Wheels, tyres — 1Steering. Steering wheel — 1Steering. Steering column — 1Steering. Steering rack — 1Brake system. Technical data — 1ABS, ADR, TCS, EDL, ESP. Overview of fitting locations — 1ABS, ADR, TCS, EDL, ESP. Control unit and hydraulic unit — 1ABS, ADR, TCS, EDL, ESP. Sensors — 1Brake, brake mechanics. Front brake — 1Brake, brake mechanics. Rear brake — 1Brake, brake mechanics. Parking brake — 1Brake, brake mechanics. Brake pedal — 1Brakes, hydraulics, regulator, servo. Brake servo and brake master cylinder — 1Brakes, hydraulics, regulator, servo. Hydraulic system — 1Wheels and Tyres Guide. Wheels, tyres. axle align — 1Wheels, tyres. axle align. Instructions on using the guide — 1Wheels, tyres. axle align. Legislative and technical conditions — 1Wheels, tyres. axle align. Wheel change — 1Wheels, tyres. axle align. Fitting tyre — 1Wheels, tyres. axle align. Wheel bolts — 1Wheels, tyres. axle align. Information on tyres — 1Wheels, tyres. axle align. Handling problems — 1Wheels, tyres. axle align. Evaluating tyres — 1Wheels, tyres. axle align. Tyre wear — 1Starter-current supply-CC. Battery — 1Instruments, GCI. Dash panel insert — 1Instruments, GCI. Horn — 1Windscreen wipewash system. Windscreen wiper system — 1Windscreen wipewash system. Windscreen washer system — 1Windscreen wipewash system. Rear window wiper system — 1Windscreen wipewash system. Rear window washer system — 1Lights, lamps, switches outside. LED headlight — 1Lights, lamps, switches outside. LED matrix headlight — 1Lights, lamps, switches outside. Tail lights — 1Lights, lamps, switches outside. Lights in exterior mirror — 1Lights, lamps, switches outside. Number plate light — 1Lights, lamps, switches outside. Entry and start authorisation system — 1Lights, lamps, switches outside. Steering column switch module — 1Lights, lamps, switches outside. Towing bracket — 1Lights, lamps, switches inside, anti-theft system. Lights — 1Lights, lamps, switches inside, anti-theft system. Controls — 1Lights, lamps, switches inside, anti-theft system. Anti-theft alarm system — 1Lights, lamps, switches inside, anti-theft system. Cigarette lighter, socket — 1Wiring. Relay carriers, fuse holders, electronics boxes — 1Wiring. Control units — 1Infotainment. Componentscontrol units — 1Infotainment. Multifunction steering wheel — 1Driver assist systems. Senders, sensors, control units — 1Driver assist systems. Adaptive cruise control — 1Driver assist systems. Reversing camera system — 1Driver assist systems. Front camera for driver assist systems — 1Driver assist systems. Overhead view camera — 1Electrical system. Starter-current supply-CC — 1Electrical system. Windscreen wipe and wash system — 1Wiring. Wires and lines — 1
~11min read
010203040502015N·mlb·ft
Tightening torque found on this page
  • Assembly overview – steering rack, left-hand drive
  • Assembly overview – steering rack, right-hand drive
  • Removing and installing boot
  • Removing and installing track rod
  • Removing and installing track rod ball joint
  • Assembly overview – track rods
  • Servicing steering rack
  • Removing and installing steering rack, left-hand drive
  • Removing and installing steering rack, right-hand drive vehicle

Assembly overview – steering rack, left-hand drive

Assembly overview – steering rack, left-hand drive

1 - Electrical wire

2 - Nut

❏ Qty. 2

❏ Renew after removing

❏ M 12 x 1.5

❏ 20 N·m +90°

3 - Steering rack with power steering control unit -J500-

❏ → Rep. gr.48; Assembly overview – track rods

❏ → Rep. gr.48; Removing and installing steering rack

4 - Threaded bush

❏ Qty. 2

❏ → Rep. gr.48; Repairing steering rack

5 - Subframe

❏ → Rep. gr.40; Assembly overview – subframe

❏ → Rep. gr.40; Fixing subframe in position

❏ → Rep. gr.40; Removing and installing subframe with steering rack

6 - Bolt

❏ Qty. 2

❏ Renew after removing

❏ M12 × 1.5 × 70

❏ 70 N·m +180°

Assembly overview – steering rack, right-hand drive

Assembly overview – steering rack, right-hand drive

1 - Electrical wire

2 - Nut

❏ Qty. 2

❏ Renew after removing

❏ 20 N·m +90°

3 - Steering rack with power steering control unit -J500-

❏ → Rep. gr.48; Assembly overview – track rods

❏ → Rep. gr.48; Removing and installing steering rack

4 - Threaded bush

❏ Qty. 2

❏ → Rep. gr.48; Repairing steering rack

5 - Subframe

❏ → Rep. gr.40; Assembly overview – subframe

❏ → Rep. gr.40; Fixing subframe in position

❏ → Rep. gr.40; Removing and installing subframe with steering rack

6 - Bolt

❏ Qty. 2

❏ Renew after removing

❏ M12 × 1.5 × 70

❏ 70 N·m +180°

Removing and installing boot

Removing and installing boot

Special tools and workshop equipment required

♦ pinch-on clamp tool for steering rack -VAS 6199A-

Removal and installation are described for the left side of vehicle as an example.

Removing

– Remove wheel → Rep. gr.44; Removing and installing wheel.

– Clean steering rack and track rod on outer side in area of boot using a cleaning cloth.

– Remove track rod ball joint → Rep. gr.48; Removing and installing track rod ball joint.

– Open clamp -3- for boot -2- on steering rack -1-.

– Open clamp -2- of boot -3- on track rod -1-.

– Pull off boot -3-.

Installing

Install in reverse order of removal, observing the following:

NOTICE

Check the steering rack for signs of wear.

– The steering rack must be renewed if it shows signs of corrosion, damage, wear or soiling.

– If there is no film of grease on the steering rack, the steering rack must be renewed.

– Do not grease rack.

– Push new clamps and boot onto track rod.

– Lightly grease sealing surface between boot and track rod/steering rack. For allocation, see → Electronic parts catalogue (ETKA).

– Push boot onto steering rack to stop.

– Secure new clamp -1- on boot using pinch-on clamp tool for steering rack -VAS 6199A-.

– Clamp together clamp -1- until it is properly deformed -arrow-.

– Position boot -2- in installation position on outside of track rod -1-.

– Secure clamp -2- of boot -3- on track rod -1-.

– Carry out wheel alignment → Rep. gr.44; Wheel alignment.

Tightening torques

♦ → Rep. gr.48; Assembly overview – track rods

Removing and installing track rod

Removing and installing track rod

Special tools and workshop equipment required

♦ open-end spanner insert -V.A.G 1923-

Removing

Removal and installation are described for the left side of vehicle as an example.

– Remove wheel → Rep. gr.44; Removing and installing wheel.

– Clean steering rack and track rod on outer side in area of boot using a cleaning cloth.

– Remove track rod ball joint → Rep. gr.48; Removing and installing track rod ball joint.

– Open clamp -3- for boot -2- on steering rack -1-.

– Pull boot off steering rack -2-, and push it outwards -arrow-.

– Unscrew track rod -1- using open-end spanner insert -V.A.G 1923-.

Installing

Install in reverse order of removal, observing the following:

NOTICE

Check the steering rack for signs of wear.

– The steering rack must be renewed if it shows signs of corrosion, damage, wear or soiling.

– If there is no film of grease on the steering rack, the steering rack must be renewed.

– Do not grease rack.

– Screw in and tighten track rod.

– Slightly grease sealing surface between boot and steering rack. Allocation → Electronic parts catalogue (ETKA).

– Install boot → Rep. gr.48; Removing and installing boot.

– Carry out wheel alignment → Rep. gr.44; Wheel alignment.

Tightening torques

♦ → Rep. gr.48; Assembly overview – track rods

Removing and installing track rod ball joint

Removing and installing track rod ball joint

Special tools and workshop equipment required

♦ ball joint puller -3287A-

Removing

Removal and installation are described for the left side of vehicle as an example.

– Remove wheel → Rep. gr.44; Removing and installing wheel.

– Turn steering wheel to full left lock.

– Turn steering as follows:

Important

● For left track rod ball joint, turn steering to full left lock.

● For right track rod ball joint, turn steering to full right lock.

– Mark or measure installation position of track rod ball joint -3- on track rod -1-.

– Loosen nut -2- by counterholding at hexagon -arrow A- on track rod -1-.

– Loosen track rod -1- at track rod ball joint -3-. Use suitable tool on hexagon -arrow A- and -arrow B- to do this.

– Loosen nut -2- on track rod ball joint -4-, but do not unscrew it completely.

– Counterhold on pin using a suitable tool while doing so.

– Unscrew nut -2- only up to end of thread.

NOTICE

Risk of damage to wheel bearing housing! Loosened bushes on wheel bearing housing due to incorrect placement of ball joint puller.

– Position ball joint puller in such a way that fulcrum of bottom support is on bush and not on wheel bearing housing.

– Use ball joint puller -3287A- -A- to press track rod ball joint -4- off wheel bearing housing -1-. Unscrew nut -2-.

– Unscrew track rod ball joint -3- from track rod -1-.

– Use suitable tool on hexagon -arrow A- and -arrow B- to do this.

Installing

Install in reverse order of removal, observing the following:

– Screw track rod ball joint -3- onto track rod -1- up to previously applied mark, and secure it with nut -2-.

– Carry out wheel alignment → Rep. gr.44; Wheel alignment.

Tightening torques

♦ → Rep. gr.48; Assembly overview – steering rack

♦ → Rep. gr.48; Assembly overview – track rods

Assembly overview – track rods

Assembly overview – track rods

1 - Left track rod ball joint

❏ → Rep. gr.48; Removing and installing track rod ball joint

2 - Nut

❏ Qty. 2

❏ Renew after removing

❏ M 12 x 1.5

❏ 20 N·m +90°

3 - Nut

❏ Qty. 2

❏ M16 × 1.5

❏ 70 N·m

4 - Right track rod ball joint

❏ → Rep. gr.48; Removing and installing track rod ball joint

5 - Clamp

❏ Qty. 2

❏ Renew after removing

6 - Boot

❏ Renew after removing

❏ → Rep. gr.48; Removing and installing boot

7 - Track rod

❏ → Rep. gr.48; Removing and installing track rod

❏ 100 N·m

8 - Threaded bush

❏ Qty. 2

❏ → Rep. gr.48; Servicing steering rack

9 - Clamp

❏ Qty. 2

❏ Renew after removing

10 - Steering rack with power steering control unit -J500-

❏ → Rep. gr.48; Assembly overview – steering rack

❏ → Rep. gr.48; Removing and installing steering rack

Servicing steering rack

Servicing steering rack

Removing

Power steering control unit -J500- is fitted in steering rack.

Steering rack and power steering control unit -J500- are referred to as steering rack below.

– Remove steering rack → Rep. gr.48; Removing and installing steering rack.

– Drive out threaded bush -1- in direction of -arrow- using a hammer.

Installing

Installation is carried out in reverse order; note the following:

– Fit threaded bush -1-, making sure it is straight.

– Drive in threaded bush -1- as far as it will go from above using a hammer.

Tightening torques

♦ → Rep. gr.40; Exploded view - subframe

♦ → Rep. gr.48; Exploded view - steering rack

♦ → General body repairs, exterior; Rep. gr.66; Underbody trim; Exploded view - underbody trim

Removing and installing steering rack, left-hand drive

Removing and installing steering rack, left-hand drive

Removing

Steering rack with power steering control unit -J500- will henceforth be referred to as “steering rack”.

– Turn steering wheel to straight ahead position.

– Disconnect battery → Electrical system; Rep. gr.27; Battery; Disconnecting and connecting battery.

– Remove front underbody cladding → General body repairs, exterior; Rep. gr.66; Underbody cladding; Removing and installing front underbody cladding.

– Unscrew bolts -3-.

– Unscrew bolt -3-.

– Pull universal joint -1- in direction of -arrow- off steering rack -4-.

– Remove track rods on both sides of vehicle → Rep. gr.48; Removing and installing track rod.

– Lever steering rack -1- with threaded bushes -3- out of holes -arrows- of subframe -2-.

– First, swing steering rack -1- on right side in direction of -arrow A-.

– Then, swing steering rack -1- in direction of -arrow B-.

– Disconnect electrical connectors -1- and -4- from steering rack -3-.

– Unclip electrical wire from steering rack.

– Remove steering rack -3- downwards.

Installing

Install in reverse order of removal, observing the following:

– Position steering rack -1- on subframe -2-.

Important

● Threaded bushes -3- of steering rack -1- must be inserted in holes -arrows- of subframe -2-.

– Perform basic setting for steering angle sender using → Vehicle diagnostic tester → Rep. gr.00; Access to diagnoses.

– Adapt electromechanical power steering using → Vehicle diagnostic tester → Rep. gr.00; Access to diagnoses.

Important

● If a new steering rack has been installed:

Tightening torques

♦ → Rep. gr.48; Assembly overview – steering rack

Removing and installing steering rack, right-hand drive vehicle

Removing and installing steering rack, right-hand drive vehicle

Removing

Steering rack with power steering control unit -J500- will henceforth be referred to as “steering rack”.

– Turn steering wheel to straight ahead position.

– Disconnect battery → Electrical system; Rep. gr.27; Battery; Disconnecting and connecting battery.

– Remove front underbody cladding → General body repairs, exterior; Rep. gr.66; Underbody cladding; Removing and installing front underbody cladding.

– Unscrew bolts -3-.

– Unscrew bolt -3-.

– Pull universal joint -1- in direction of -arrow- off steering rack -4-.

– Remove track rods on both sides of vehicle → Rep. gr.48; Removing and installing track rod.

– Disconnect electrical connectors -2- and -3- from steering rack -1-.

– Unclip electrical wire from steering rack.

– Lever steering rack -1- with threaded bushes -3- out of holes -arrows- of subframe -2-.

– Swing steering rack -1- on left side in direction of -arrow A-.

– Swing steering rack -1- in direction of -arrow B-.

– Remove steering rack -1- downwards.

Installing

Install in reverse order of removal, observing the following:

– Position steering rack -1- on subframe -2-.

Important

● Threaded bushes -3- of steering rack -1- must be inserted in holes -arrows- of subframe -2-.

– Perform basic setting for steering angle sender using → Vehicle diagnostic tester → Rep. gr.00; Access to diagnoses.

– Adapt electromechanical power steering using → Vehicle diagnostic tester → Rep. gr.00; Access to diagnoses.

Important

● If a new steering rack has been installed:

Tightening torques

♦ → Rep. gr.48; Assembly overview – steering rack