Thinners
2K thinner
Designation:
- 2K thinner -LVE 009 001 A5-
- 2K thinner, long -LVM 009 300 A2-
- 2K thinner, plus -LHA 014 000 A5-
- 2K thinner, special -LVM 009 200 A2-/-LVM 009 200 A5-
- Nitro thinner -LVE 856 000 A3-
Product description
The following overview describes the VW thinners that are optimally suited for passenger car refinishing.
These thinners are used to adjust the processing viscosity of the base products so that optimal processing is possible under all conditions.
![]()
Note
They must not be used to thin waterborne basecoats.
Application information
Application range
Mixing ratio:
- See the technical application information of the respective base product
Selection of thinners
+ + - -optimal
+ - -suitable
- - -conditionally suitable
- - - -not suitable
![]()
Note
This table is a general overview of the possible uses of the listed thinners. Details in the technical application information of the respective base product take precedence.


Main application areas and uses of the thinners


Personal protective equipment:
- Observe the safety data sheet
- Wear personal protective equipment during application

Storage
The guaranteed shelf life of all thinners is 60 months from the production date. Use by the date stated on the label, when stored in sealed original containers at +20 ºC.

HS spot thinner
Designation:
- HS Spot Thinner -LVM 006 000 A2-
Product description
HS spot thinner -LVM 006 000 A2- is a special drying accelerator for small-area repairs in certain 2K HS clear coats and 2K HS topcoats. At the specified mixing ratio, the clear coats and topcoats remain VOC-compliant.
Use:
- Application range Clever-Repair
- for small areas only
- do not apply to horizontal surfaces
Application information
Substrate
See the technical application information of the respective base product.
Suitable basecoats:
- 2K HS Brillant Plus clearcoat -LZK 769 K05 A5-
- HS Vario clear coat -L2K 769 K01 A5-
- 2K HS Performance Clearcoat -LZK 769 K06 A5-
- 2K HS Optimum Plus clear coat -LZK 769 K07 A5-
- 2K HS solid colour topcoat -L2K 073.....-
- 2K HS mixing colour -L2K 074.....-
Processing
Mixing ratio:
- 3:1 by volume with:
- 2K VHS hardener -LHA 009 051 A2-/-LVM 009 051 A5-
- 2K VHS Hardener, short -LHA 009 050 A2-
Thinnable with:
- HS spot thinner -LVM 006 000 A2- (HS spot thinner is added instead of the 2K thinner, special -LVM 009 200 A2-/-LVM 009 200 A5-)
- +5 % for 2K HS Brillant Plus clear coat -LZK 769 K05 A5-
- +12.5 % for HS Vario clear coat -L2K 769 K01 A5-
- +5 % for 2K HS performance clear coat -LZK 769 K06 A5-
- +10 % for 2K HS Optimum Plus clear coat -LZK 769 K07 A5-
- +12.5 % for 2K HS uni topcoat -L2K 073.....-/2K HS solid colour -L2K 074.....-

Processing/pot life:
- Spray-ready after 35-45 minutes at +20 ºC (clear coat with 2K VHS hardener -LHA 009 051 A2-/-LVM 009 051 A5-)
- Spray-ready after 50-60 minutes at +20 ºC (clear coat with 2K HS uni topcoat -L2K 073.....-/2K HS solid colour -L2K 074.....-)
Application:
- The processing of the clear coats and the 2K HS solid colour/topcoat can be found in the respective technical application information.
![]()
Note
- Large-area applications and horizontal surfaces (e.g. bonnet) may result in technical disadvantages.
- When used within the Clever-Repair system, a "short" hardener system is preferred.

Personal protective equipment:
- Observe the safety data sheet
- Wear personal protective equipment during application
Characteristics

Flash point: +21 ºC
Storage
The guaranteed shelf life of the HS spot thinner is 24 months from the production date. Use by the date stated on the label, when stored in sealed original containers at +20 ºC.

Deionized (DI) water
Designation:
- Deionized water Aquaplus -LVW 010 000 A5-
![]()
Note
No ATI is required for this product.