Clearcoats
2K HS clearcoat
Designation:
- 2K HS clearcoat -L2K 769 500 A5-
Product description
The 2K HS clearcoat is a VOC-compliant, high-quality high-solids clearcoat.
Features:
- easy application
- Variable application with 2K HS and 2K VHS hardeners
- good flow properties
- brilliant surface finish
Application information
Substrate
Suitable basecoats:
- Waterborne basecoats
Suitable base materials:
- Depending on object and substrate, per our build-up recommendation
Application with 2K HS hardeners
Mixing ratio:
- 2:1 by volume with:
- 2K HS hardener -LHA 009 041 A3-
- 2K HS hardener, short -LHA 021 004 A3-
- 2K HS Hardener, extra short -LHA 009 046 A2-
- 2K HS hardener, long -LHA 009 047 A3-
- 2K HS hardener, extra long -LHA 009 048 A3-
- see application technical information 2K HS hardener

Processing/pot life:
- Spray-ready setting: 90 minutes at +20 °C

Application method "Spray pass"

- Application viscosity at +20 ºC material temperature; for "Compliant" and "HVLP" this is the mixed viscosity.

- Set spray nozzle (see manufacturer's specifications): "Compliant" 1.3–1.4 mm.
- Set spray nozzle (see manufacturer's data): "HVLP" 1.3-1.5 mm.
- Set spray pressure (see manufacturer's specifications): "Compliant" 2.0–2.5 bar.
- Set atomizing air pressure (see manufacturer's specifications): "HVLP" 0.7 bar.

- The recommended dry film thickness is 50-60 µm.

Application with 2K VHS hardeners
Mixing ratio:
- 3:1 by volume with:
- 2K VHS hardener -LHA 009 051 A2-/-LVM 009 051 A5-
- 2K VHS Hardener, short -LHA 009 050 A2-
- 2K VHS hardener, long -LHA 009 052 A2-/-LHA 009 052 A3-
- 2K VHS hardener, extra long -LHA 009 053 A2-
- see application information 2K VHS hardener
Thinner:
- 2K thinner, special -LVM 009 200 A2-/-LVM 009 200 A5-

Processing/pot life:
- Ready-to-spray after 60-90 minutes at +20 °C

Application method "Spray pass"

- Application viscosity at +20 ºC material temperature; for "Compliant" and "HVLP" this is the mixed viscosity.

- Add 12.5-15 % 2K thinner, special -LVM 009 200 A2-/-LVM 009 200 A5-.

- Set spray nozzle (see manufacturer's specifications): "Compliant" 1.3–1.4 mm.
- Set spray nozzle (see manufacturer's data): "HVLP" 1.3-1.5 mm.
- Set spray pressure (see manufacturer's specifications): "Compliant" 2.0–2.5 bar.
- Set atomizing air pressure (see manufacturer's specifications): "HVLP" 0.7 bar.

- The recommended dry film thickness is 50-60 µm with 1.5 spray passes.

Drying
Air drying at +20 ºC room temperature:
- Dust-dry after 40-50 minutes
- Assembly-ready after 4-6 hours
- dry overnight

The flash-off time with forced drying is at least 5-10 minutes.

Forced drying at +60 °C object temperature 30-40 minutes

The final flash-off time for infrared drying is at least 5 minutes.

Infrared drying with short-wave emitter 10-15 minutes and medium-wave emitter 15-20 minutes

Special Notes
Flexibilizing for rigid and semi-rigid plastics:
- The base material must first be mixed with 15 % elasticizer -ALZ 011 001-.
- Mixed with 2K HS hardeners, 2:1
- Mixed with 2K VHS hardeners, 3:1 with 15 % thinner (drying time is extended)

Personal protective equipment:
- Observe the safety data sheet
- Wear personal protective equipment during application
Characteristics


Storage
The guaranteed shelf life of 2K HS clearcoat -L2K 769 500 A5- is 48 months from production date. Usable at the latest until the date given on the label when stored in sealed original containers at +20 °C.

2K MS clearcoat matt
Designation:
- 2K MS clearcoat, matt -L2K 769 020 A2-
Product description
The 2K MS clearcoat, matt is a clearcoat from the 2K acrylic system.
Features:
- high flexibility
- matt version
- can be cross-linked variably with HS and VHS products
- Gloss level adjustment with 2K HS clear coats is possible.
- ideally suited for plastic coatings
![]()
Note
The use of 2K MS clear coat, matt -L2K 769 020 A2- should be limited to small areas (passenger car attachments).
Application information
Substrate
Suitable basecoats:
- Waterborne basecoats
Processing
Mixing ratio:
- 3:1 by volume with:
- 2K HS hardener -LHA 009 041 A3-
- 2K HS hardener, long -LHA 009 047 A3-
- 2K HS hardener, extra long -LHA 009 048 A3-

Mixing ratio:
- 5:1 by volume with:
- 2K VHS hardener -LHA 009 051 A2-/-LVM 009 051 A5-
- 2K VHS hardener, long -LHA 009 052 A2-/-LHA 009 052 A3-
- 2K VHS hardener, extra long -LHA 009 053 A2-
![]()
Note
- The use of different HS/VHS hardeners and thinners results in different gloss levels.

- Before removing material, stir the clear coat thoroughly.
Thinner:
- 2K thinner -LVE 009 001 A5-
- 2K thinner, long -LVM 009 300 A2-
- 2K thinner, special -LVM 009 200 A2-/-LVM 009 200 A5-

Processing/pot life:
- Spray-ready mix: 4 hours at +20 °C

Application method "Spray pass"

- Application viscosity at +20 ºC material temperature; for "Compliant" and "HVLP" this is the mixed viscosity.
Application viscosity, 4 mm flow cup, "Compliant" and "HVLP" spray guns:
DIN 4 mm: 14-16 seconds
ISO 4 mm: 28-33 seconds

Thinner addition at +20 °C material temperature: 25 % with HS hardener (3:1) and 30 % with VHS hardener (5:1)
- When adding thinner, use a measuring stick during mixing.

- Set the spray nozzle (see manufacturer's specifications): "Compliant" and "HVLP" 1.3-1.4 mm.
- Set spray pressure (see manufacturer's specifications): "Compliant" 2.0–2.5 bar.
- Set atomizing air pressure (see manufacturer's specifications): "HVLP" 0.7 bar.
- Apply in 2 spray passes.

- Apply one closed spray pass, allow to flash off for 15-20 minutes, then apply the final coat.
- The specified dry film thickness is 50-60 µm.
![]()
Note
Different application methods result in different gloss levels.

Drying
Air drying at +20 ºC room temperature:
- dust-dry after 2-2.5 hours
- ready for assembly after 5-6 hours
- dry overnight

The final flash-off time with forced drying is at least 15-20 minutes.

Forced drying at +60 °C object temperature 40-45 minutes

Personal protective equipment:
- Observe the safety data sheet
- Wear personal protective equipment during application
Characteristics


Storage
The guaranteed storage stability of the 2K MS clear coat, matt -L2K 769 020 A2- is 24 months from the production date. Use by the date stated on the label at the latest, when stored in closed original containers at +20 °C.

2K HS Vario Clear Coat
Designation:
- 2K HS Vario Clear Coat -L2K 769 K01 A5-
Product description
The 2K HS Vario clear coat is a VOC-compliant (VOC value < 420 g/l), high-quality and productive high-solids clear coat.
Features:
- simple and fast processing
- Variable application with 2K HS and 2K VHS hardeners
- good flow properties
- fast drying
- easy polishing
Application information
Substrate
Suitable basecoats:
- Waterborne basecoats
Application with 2K HS hardeners
Mixing ratio:
- 2:1 by volume with:
- 2K HS hardener -LHA 009 041 A3-
- 2K HS hardener, short -LHA 021 004 A3-
- 2K HS hardener, long -LHA 009 047 A3-
- 2K HS hardener, extra long -LHA 009 048 A3-
Elasticizing, see

Processing/pot life:
- Spray-ready mix: 60-90 minutes at +20 °C (depending on the hardener used)

Application method "Spray pass"

- Application viscosity at +20 ºC material temperature; for "Compliant" and "HVLP" this is the mixed viscosity.

- Set spray nozzle (see manufacturer's specifications): "Compliant" 1.2-1.3 mm.
- Set spray nozzle (see manufacturer's specifications): "HVLP" 1.3–1.4 mm.
- Set spray pressure (see manufacturer's specifications): "Compliant" 2.0–2.5 bar.
- Set atomizing air pressure (see manufacturer's specifications): "HVLP" 0.7 bar.

- Apply in 1.5 spray passes.
![]()
Note
During application, the first half spray pass should form an almost closed thin film, immediately followed by a full closed spray pass.
- The recommended dry film thickness is 50-60 µm.

Application with 2K VHS hardeners
Mixing ratio:
- 3:1 by volume with:
- 2K VHS hardener -LHA 009 051 A2-/-LVM 009 051 A5-
- 2K VHS Hardener, short -LHA 009 050 A2-
- 2K VHS hardener, long -LHA 009 052 A2-/-LHA 009 052 A3-
- 2K VHS hardener, extra long -LHA 009 053 A2-
- see application information 2K VHS hardener
Thinner:
- 2K thinner, special -LVM 009 200 A2-/-LVM 009 200 A5-
- 2K Thinner, long -LVM 009 300 A2-
- HS Spot Thinner -LVM 006 000 A2- Please observe the application information for "HS Spot Thinner"
Elasticizing, see

Processing/pot life:
- Spray-ready mix: 60-90 minutes at +20 °C (depending on the hardener used)

Application method "Spray pass"

- Application viscosity at +20 ºC material temperature; for "Compliant" and "HVLP" this is the mixed viscosity.

- Add 12.5 % 2K thinner, special -LVM 009 200 A2-/-LVM 009 200 A5- / 2K thinner, long -LVM 009 300 A2- at +20 °C material temperature.

- Set spray nozzle (see manufacturer's specifications): "Compliant" 1.2-1.3 mm.
- Set spray nozzle (see manufacturer's specifications): "HVLP" 1.3–1.4 mm.
- Set spray pressure (see manufacturer's specifications): "Compliant" 2.0–2.5 bar.
- Set atomizing air pressure (see manufacturer's specifications): "HVLP" 0.7 bar.

- Apply in 1.5 spray passes.
![]()
Note
- During application, the first half spray pass should form an almost closed thin film, immediately followed by a full closed spray pass.
- When used as a clear coat for small damage repair (Clever Repair process), the 12.5 % 2K thinner, special -LVM 009 200 A2- can be replaced with 12.5 % HS Spot Thinner -LVM 006 000 A2-. Do not use on horizontal surfaces.
- The recommended dry film thickness is 50-60 µm.

Drying
Air drying at +20 ºC room temperature:
- dust-dry after 20-30 minutes
- ready for assembly after 4-5 hours
- dry overnight

The final flash-off time with forced drying is at least 5-10 minutes.

Forced drying at +60 °C object temperature 20-30 minutes

The final flash-off time for infrared drying is at least 5 minutes.

Infrared drying with short-wave emitter 10-15 minutes and medium-wave emitter 15-20 minutes

Special Notes
Flexibilizing for rigid and semi-rigid plastics:
- The base material must first be mixed with 15 % elasticizer -ALZ 011 001-.
- Mixed with 2K HS hardeners, 2:1
- Mixed with 2K VHS hardeners, 3:1 with 20 % thinner (drying time increases)
When used as a clear coat for small damage repair (Clever Repair process), the 12.5 % 2K thinner, special -LVM 009 200 A2-/-LVM 009 200 A5- can be replaced with 12.5 % HS Spot Thinner -LVM 006 000 A2-. Do not use on horizontal surfaces.

Personal protective equipment:
- Observe the safety data sheet
- Wear personal protective equipment during application
Characteristics


Storage
The guaranteed storage stability of the 2K HS Vario Clear Coat -L2K 769 K01 A5- is 48 months from the production date. Use by the date stated on the label at the latest, when stored in closed original containers at +20 °C.

2K HS Optimum Clear Coat
Designation:
- 2K HS Optimum Clear Coat -LZK 769 K02 A5-
Product description
The 2K HS Optimum clear coat is a VOC-compliant (VOC value < 420 g/l), high-quality and productive high-solids clear coat.
Features:
- simple and economical processing
- very good flow properties
- very fast drying
- very good IR drying
- fast and easy polishing
- high-gloss result
Application information
Substrate
Suitable basecoats:
- Waterborne basecoats
Processing
Mixing ratio:
- 3:1 by volume with:
- 2K VHS hardener -LHA 009 051 A2-/-LVM 009 051 A5-
- 2K VHS Hardener, short -LHA 009 050 A2-
- 2K VHS hardener, long -LHA 009 052 A2-/-LHA 009 052 A3-
- 2K VHS hardener, extra long -LHA 009 053 A2-
- see application information 2K VHS hardener
Elasticizing, see

Processing/pot life:
- Spray-ready mix: 80-100 minutes at +20 °C

Application method "Spray pass"

- Application viscosity at +20 ºC material temperature; for "Compliant" and "HVLP" this is the mixed viscosity.

- Set spray nozzle (see manufacturer's specifications): "Compliant" 1.2-1.3 mm.
- Set spray nozzle (see manufacturer's specifications): "HVLP" 1.3–1.4 mm.
- Set spray pressure (see manufacturer's specifications): "Compliant" 2.0–2.5 bar.
- Set atomizing air pressure (see manufacturer's specifications): "HVLP" 0.7 bar.

- Apply in 1.5 spray passes.
![]()
Note
During application, the first half spray pass should form an almost closed thin film, immediately followed by a full closed spray pass.
- The recommended dry film thickness is 45-55 µm.

Drying
Air drying at +20 ºC room temperature:
- Dust-dry after 40-50 minutes
- Assembly-ready after 4-6 hours
- dry overnight

The final flash-off time with forced drying is at least 5-10 minutes.

Forced drying at +60 °C object temperature with:
- 2K VHS hardener -LHA 009 051 A2-/-LVM 009 051 A5- 20-25 minutes.
- 2K VHS hardener, short -LHA 009 050 A2- 15-20 minutes.
- 2K VHS hardener, long -LHA 009 052 A2-/-LHA 009 052 A3- 20-30 minutes.
- 2K VHS hardener, extra long -LHA 009 053 A2- 25-35 minutes.

The final flash-off time with infrared drying is at least 5-10 minutes.

Infrared drying, short-wave emitter 8-12 minutes

Special Notes
Flexibilizing for rigid and semi-rigid plastics:
- The base material must first be mixed with 15 % elasticizer -ALZ 011 001-.
- Mixed with 2K VHS hardeners, 3:1 with 5 % thinner (drying time increases).

Personal protective equipment:
- Observe the safety data sheet
- Wear personal protective equipment during application
Characteristics


Storage
The guaranteed storage stability of the 2K HS Optimum Clear Coat -LZK 769 K02 A5- is 48 months from the production date. Use by the date stated on the label at the latest, when stored in closed original containers at +20 °C.

2K HS Optimum Plus Clear Coat
Designation:
- 2K HS Optimum Plus clearcoat -LZK 769 K07 A5-
Product description
The 2K HS Optimum Plus clear coat is a VOC-compliant high-solids clear coat. Optimal processing even under unfavorable booth conditions, e.g. low drying temperature.
Features:
- Flexible and productive processing possible
- very fast drying
- fast and easy polishing
- Use of HS Spot Thinner -LVM 006 000 A2- possible
Application information
Substrate
Suitable basecoats:
- Waterborne basecoats
Processing
Mixing ratio:
- - 3:1 by volume with:
- 2K VHS hardener -LHA 009 051 A2-/-LVM 009 051 A5-
- 2K VHS Hardener, short -LHA 009 050 A2-
- 2K VHS hardener, long -LHA 009 052 A2-/-LHA 009 052 A3-
- 2K VHS hardener, extra long -LHA 009 053 A2-
- see application information 2K VHS hardener
Thinner:
- 2K thinner, special -LVM 009 200 A2-/-LVM 009 200 A5-
- 2K Thinner, long -LVM 009 300 A2-
- HS Spot Thinner -LVM 006 000 A2-
- See application information for LVM 006 000 A2 HS Spot Thinner.
Elasticizing, see

Processing/pot life:
- Spray-ready mix: 45-60 minutes at +20 °C (depending on the hardener used)

Application method "Spray pass"

- Application viscosity at +20 ºC material temperature; for "Compliant" and "HVLP" this is the mixed viscosity.

- Set spray nozzle (see manufacturer's specifications): "Compliant" 1.2-1.3 mm.
- Set spray nozzle (see manufacturer's specifications): "HVLP" 1.3–1.4 mm.
- Set spray pressure (see manufacturer's specifications): "Compliant" 2.0–2.5 bar.
- Set atomizing air pressure (see manufacturer's specifications): "HVLP" 0.7 bar.

- Apply in 1.5 spray passes.
![]()
Note
During application, the first half spray pass should form an almost closed thin film, immediately followed by a full closed spray pass.
- The recommended dry film thickness is 40-60 µm.
![]()
Note
When used as a clear coat for small damage repair (Clever Repair process), the 10 % 2K thinner special -LVM 0009 200 A2- and 2K thinner special -LVM 009 200 A5- can be replaced with 10 % HS Spot Thinner -LVM 006 000 A2 HS-. Do not use on horizontal surfaces.

Drying
Air drying at +20 ºC room temperature:
- dust-dry after 15-30 minutes
- ready for assembly after 2-5 hours
- dry overnight

The final flash-off time with forced drying is 5 minutes.

Forced drying at +60 °C object temperature with:
- 2K VHS hardener -LHA 009 051 A2-/-LVM 009 051 A5- 15-25 minutes.
- 2K VHS hardener, short -LHA 009 050 A2- 10-15 minutes.
- 2K VHS hardener, long -LHA 009 052 A2-/-LHA 009 052 A3- 20-30 minutes.
- 2K VHS hardener, extra long -LHA 009 053 A2- 25-35 minutes.

The final flash-off time with infrared drying is 5 minutes.

Infrared drying, short-wave emitter 8-12 minutes

Special Notes
Flexibilizing for rigid and semi-rigid plastics:
- The base material must first be mixed with 15 % flexibilizer -ALZ 011 001-.
- Mixed with 2K VHS hardeners, 3:1 with 10 % 2K thinner special -LVM 009 200 A2- or 2K thinner special -LVM 009 200 A5- (drying time increases).

Personal protective equipment:
- Observe the safety data sheet
- Wear personal protective equipment during application
Characteristics


Storage
The guaranteed storage stability of the 2K HS Optimum Plus Clear Coat -LZK 769 K07 A5- is 48 months from the production date. Use by the date stated on the label at the latest, when stored in closed original containers at +20 °C.

2K HS Brilliant Clear Coat
Designation:
- 2K HS Brilliant Clear Coat -L2K 769 K04 A5-
Product description
The 2K HS Brilliant clear coat is a high-gloss, VOC-compliant high-solids clear coat from the 2K acrylic system.
Features:
- very high sag resistance
- high processing reliability
- very good gloss and fullness
- Versatile use through thinner addition
- Application in 2 spray passes
Application information
Substrate
Suitable basecoats:
- Waterborne basecoats
Processing
Mixing ratio:
- 3:1 by volume with:
- 2K VHS hardener -LHA 009 051 A2-/-LVM 009 051 A5-
- 2K VHS Hardener, short -LHA 009 050 A2-
- 2K VHS hardener, long -LHA 009 052 A2-/-LHA 009 052 A3-
- 2K VHS hardener, extra long -LHA 009 053 A2-
- The choice of hardener depends on temperature and object size. See technical information on 2K VHS hardeners.
Elasticizing, see
Thinnable with:
- 2K thinner, special -LVM 009 200 A2/A5-

Processing/pot life:
- Ready-to-spray pot life 60-75 minutes at +20 °C

Application method "Spray pass"

- Application viscosity 4 mm at +20 °C, DIN 53211

Thinner addition of 10 % at +20 °C material temperature
- When adding thinner, use a measuring stick during mixing.
Application viscosity, 4 mm flow cup, "Compliant" and "HVLP" spray guns:

DIN 4 mm: 18-21 seconds

- Set spray nozzle (see manufacturer's specifications): "Compliant" 1.2-1.3 mm.
- Set spray nozzle (see manufacturer's specifications): "HVLP" 1.2-1.3 mm.
- Set spray pressure (see manufacturer's specifications): "Compliant" 2.0–2.5 bar.
- Set atomizing air pressure (see manufacturer's specifications): "HVLP" 0.7 bar.
- Apply in 2 spray passes, with a 5-10 minute flash-off time between passes. The first spray pass is light, but still applied to achieve full coverage.
- The recommended dry film thickness is 50-70 µm.

Drying

The final flash-off time with forced drying is at least 10 minutes.

Forced drying at +60-65 °C object temperature takes 35-40 minutes.

The final flash-off time with infrared drying is at least 5-10 minutes.

Infrared drying: medium-wave infrared lamp 15-20 minutes and short-wave infrared lamp 10-15 minutes

Special Notes
Flexibilizing for rigid and semi-rigid plastics:
- The base material must first be mixed with 15 % elasticizer -ALZ 011 001-.
- Mixed with 2K VHS hardeners, 3:1, with 10 % 2K thinner, special -LVM 009 200 A2/A5- (drying time is extended).
Characteristics


Storage
Guaranteed shelf life of the 2K HS brilliant clearcoat -L2K 769 K04 A5- is 48 months from the production date. Use by the date stated on the label at the latest when stored in sealed original containers at +20 °C.

2K HS Brilliant Plus Clearcoat
Designation:
- 2K HS Brillant Plus clearcoat -LZK 769 K05 A5-
Product description
The 2K HS Brilliant clear coat is a high-gloss, VOC-compliant high-solids clear coat from the 2K acrylic system.
Features:
- Versatile use
- High sag resistance
- Very good polishability
- good flow properties
- Good gloss and fullness
- Application in 2 spray passes (preferred), (1.5 spray passes possible)
Application information
Substrate
Suitable basecoats:
- Waterborne basecoats
Processing
Mixing ratio:
- 3:1 by volume with:
- 2K VHS hardener -LHA 009 051 A2-/-LVM 009 051 A5-
- 2K VHS Hardener, short -LHA 009 050 A2-
- 2K VHS hardener, long -LHA 009 052 A2-/-LHA 009 052 A3-
- 2K VHS hardener, extra long -LHA 009 053 A2-
- The choice of hardener depends on temperature and object size. See technical information on 2K VHS hardeners.
Elasticizing, see
Thinnable with:
- Clearcoat additive -LVM 007 000 A2-
- HS Spot Thinner -LVM 006 000 A2-
- see technical information on HS spot thinner

Processing/pot life:
- Ready-to-spray pot life 75-90 minutes at +20 °C

Application method "Spray pass"

- Application viscosity 4 mm at +20 °C, DIN 53211

Processing viscosity, 4 mm flow cup "Compliant" and "HVLP": mixing viscosity.

Thinner addition of 5 % clearcoat additive -LVM 007 000 A2- at +20 °C material temperature
![]()
Note
- When used as a clearcoat for small damage repair (Clever Repair method), the 5 % clearcoat additive -LVM 007 000 A2- can be replaced with 5 % HS spot thinner -LVM 006 000 A2-.
- The mixture described here for the Clever Repair method must not be used on horizontal surfaces.
- When adding thinner, use a measuring stick during mixing.

- Set spray nozzle (see manufacturer's specifications): "Compliant" 1.2-1.3 mm.
- Set spray nozzle (see manufacturer's specifications): "HVLP" 1.2-1.3 mm.
- Set spray pressure (see manufacturer's specifications): "Compliant" 2.0–2.5 bar.
- Set atomizing air pressure (see manufacturer's specifications): "HVLP" 0.7 bar.

- Applicable in 2 spray passes with a 5-10 minute flash-off time between passes. The first spray pass is light, but still applied to achieve full coverage.
- Applicable in 1.5 spray passes, i.e. the first half spray pass forms an almost closed thin film, immediately followed by a full closed spray pass.
- The recommended dry film thickness is 50-70 µm.

Drying
Air drying at +18-22 °C ambient temperature:
- dry overnight

The final flash-off time with forced drying is at least 5-10 minutes.

Forced drying at +60-65 °C object temperature takes 30-35 minutes.

The final flash-off time with infrared drying is at least 5-10 minutes.

Infrared drying: short-wave infrared lamp 10-15 minutes

Special Notes
Flexibilizing for rigid and semi-rigid plastics:
- The base material must first be mixed with 15 % elasticizer -ALZ 011 001-.
- Mixed with 2K VHS hardeners, 3:1, with 5 % clearcoat additive -LVM 007 000 A2- (drying time is extended).

Personal protective equipment:
- Observe the safety data sheet
- Wear personal protective equipment during application
Characteristics


Storage
The guaranteed storage stability is:
- 2K HS Brilliant Plus Clearcoat -LZK 769 K05 A5-, 48 months from the production date.
- Clearcoat additive -LVM 007 000 A2-, 24 months from the production date.
Must be used by the date stated on the label when stored in sealed original containers at +20 °C.

2K HS Performance Clearcoat
Designation:
- 2K HS Performance Clearcoat -LZK 769 K06 A5-
Product description
The 2K HS Performance Clearcoat is a high-gloss, VOC-compliant high-solids clearcoat.
Features:
- Versatile use for all repair areas
- Flexible application in 1.5 spray passes (preferred), or 2 spray passes possible
- Good sag resistance
- Good gloss and fullness
- fast drying
Application information
Substrate
Suitable basecoats:
- Waterborne basecoats
Processing
Mixing ratio:
- 3:1 by volume with:
- 2K VHS hardener -LHA 009 051 A2-/-LVM 009 051 A5-
- 2K VHS Hardener, short -LHA 009 050 A2-
- 2K VHS hardener, long -LHA 009 052 A2-/-LHA 009 052 A3-
- 2K VHS hardener, extra long -LHA 009 053 A2-
- The choice of hardener depends on temperature and object size. See technical information on 2K VHS hardeners.
Elasticizing, see
Thinnable with:
- Clearcoat additive -LVM 007 000 A2-
- HS Spot Thinner -LVM 006 000 A2-
- see technical information on HS spot thinner

Processing/pot life:
- Ready-to-spray pot life 60-120 minutes at +20 °C

Application method "Spray pass"

- Application viscosity 4 mm at +20 °C, DIN 53211
Processing viscosity, 4 mm flow cup "Compliant" and "HVLP": mixing viscosity.

Thinner addition of 5 % clearcoat additive -LVM 007 000 A2- at +20 °C material temperature
![]()
Note
- When used as a clearcoat for small damage repair (Clever Repair method), the 5 % clearcoat additive -LVM 007 000 A2- can be replaced with 5 % HS spot thinner -LVM 006 000 A2-.
- The mixture described here for the Clever Repair method must not be used on horizontal surfaces.
- When adding thinner, use a measuring stick during mixing.

- Set spray nozzle (see manufacturer's specifications): "Compliant" 1.3–1.4 mm.
- Set spray nozzle (see manufacturer's specifications): "HVLP" 1.3–1.4 mm.
- Set spray pressure (see manufacturer's specifications): "Compliant" 2.0–2.5 bar.
- Set atomizing air pressure (see manufacturer's specifications): "HVLP" 0.7 bar.

- Applicable in 1.5 spray passes, i.e. the first half spray pass forms an almost closed thin film, immediately followed by a full closed spray pass.
- Applicable in 2 spray passes with a 5-10 minute flash-off time between passes. The first spray pass is light, but still applied to achieve full coverage.
- The recommended dry film thickness is 50-70 µm.

Drying
Air drying at +18-22 °C ambient temperature:
- dry overnight

The final flash-off time with forced drying is at least 5-10 minutes.

Forced drying at +60-65 °C object temperature takes 25-35 minutes.

The final flash-off time with infrared drying is at least 5-10 minutes.

Infrared drying: short-wave infrared lamp 10-15 minutes

Special Notes
Flexibilizing for rigid and semi-rigid plastics:
- The base material must first be mixed with 15 % elasticizer -ALZ 011 001-.
- Mixed with 2K VHS hardeners, 3:1, with 5 % clearcoat additive -LVM 007 000 A2- (drying time is extended).

Personal protective equipment:
- Observe the safety data sheet
- Wear personal protective equipment during application
Characteristics


Storage
The guaranteed storage stability is:
- 2K HS Brilliant Plus Clearcoat -LZK 769 K05 A5-, 48 months from the production date.
- Clearcoat additive -LVM 007 000 A2-, 24 months from the production date.
Must be used by the date stated on the label when stored in sealed original containers at +20 °C.

Blender
Designation:
- Blender -LVE 013 100 A2-
Product description
The blender was developed for the problem-free blend-in repair method of 2K clearcoats and topcoats.
Features:
- Simple application (neat)
- Good wetting on all substrates
- Very fine transition to the existing paint
Application information
Preparation
Basecoat application:
- Keep the filler area as small as possible.
- Cover the filler spot completely with waterborne basecoat (overlapping spray passes).
Spot-in system for 2K clearcoats
Mixing ratio with 2K clearcoat:
- Setting according to the technical information for the 2K clearcoat.

Painting:
- Overcoat the waterborne basecoat with the adjusted clearcoat (overlapping spray passes).

Spot-in procedure:
- Apply blender -LVE 013 100 A2- neat to the blend-in area within the sanded area.

Spot-in system for 2K topcoats
Mixing ratio with 2K topcoat:
- Setting according to the technical information for the 2K topcoat.

Painting:
- Overcoat the filler spot completely (overlapping spray passes).

Spot-in procedure:
- Apply blender -LVE 013 100 A2- neat to the blend-in area within the sanded area.

Polishing the spot-in zones
Air drying at +20 ºC room temperature:
- Polish the spot-in zones only after drying overnight

The final flash-off time with forced drying is at least 5-10 minutes.

Forced drying at +60 °C object temperature takes 30 minutes.
- After that, the spot-in zones can be polished at +20 °C ambient temperature after one hour of cooling.

The final flash-off time with infrared drying is at least 5-10 minutes.

Infrared drying: short-wave infrared lamp 10 minutes
- After that, the spot-in zones can be polished at +20 °C ambient temperature after one hour of cooling.
![]()
Note
- Blend the spot-in zones with fine polishing compound by hand or with a polisher.
- Finally, treat the area with high-gloss sealant.

Personal protective equipment:
- Observe the safety data sheet
- Wear personal protective equipment during application
Characteristics

Flash point: -+20 °C
Storage
The guaranteed shelf life is 60 months from the production date. Use by the date stated on the label at the latest when stored at L