Jacking up the vehicle. Hood - Opening and closing

When jacking up the Volvo S80 (2nd generation, 2013–2016), correct placement of the jack or lift is essential. This section describes the designated lifting points and provides guidance on the safe use of the workshop jack. It also describes opening and closing the hood. Tips for checking proper latching help ensure safety during service work.

Jacking up the vehicle

When lifting the vehicle, make sure the jack or the lift arms are placed at the designated points on the underside of the vehicle.

Volvo recommends using only the jack supplied for the vehicle model. If a jack other than the one recommended by Volvo is used, follow the instructions supplied with the equipment.

Attachment points (arrows) for the vehicle jack and lifting points (marked in red).

When lifting the front of the vehicle with a workshop jack, place the jack under one of the four innermost lifting points. When lifting the rear of the vehicle with a workshop jack, place the jack under one of the lifting points. Make sure the workshop jack is positioned so the vehicle cannot slip off. Always support the vehicle with support stands or similar.

When lifting the vehicle on a 2-post lift, the front and rear lift arms can be placed under the outer lifting points (attachment points for the jack). At the front, the inner lifting points can also be used.

Related information

- Wheel change - removing the wheel

Hood - Opening and closing

The hood can be opened by pulling the handle next to the pedals and pushing the catch on the radiator grille to the left.

1. 1
   Pull the handle by the pedals. A click indicates that the catch has released.
2. 2
   Move the catch to the left and open the hood. (The catch hook is located between the headlight and the radiator grille, see illustration.)

When closing the hood, check that it latches securely.

Related information

- Engine compartment - Check

- Engine compartment - Overview

Safely jacking up the Volvo S80 (2nd gen) requires placing the jack at the designated points. Volvo recommends using the original jack, or following the manufacturer's instructions when using other tools.

When opening the hood, release it correctly to avoid damage. The hood must latch properly when closed.

FAQ

What to watch for with the jack?
Only place it at the designated points, and additionally support the vehicle.

How do I open the hood?
Pull the handle next to the pedals and push the catch on the radiator grille to the left.