Steering

Installation

~1min read

PROCEDURE

1. Install the steering gear rubber mount so that it aligns with the holes in the clamp and steering gear bracket.
2. Apply adhesive to the side of the cylinder where the rubber mount is installed so that its split portion does not open.
3. Check that there are no fluid leaks.
4. Check that the steering wheel turns smoothly.
5. Adjust the front wheel toe.

6. Установите остальные детали с учетом требуемых моментов затяжки.

6. Install the remaining parts, observing the specified tightening torques.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.