Hyundai Accent Quiz
Steering

Removal

In this manual: Steering
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

PROCEDURE

1. Извлеките шплинты и отверните гайки крепления цапф шаровых шарниров наконечников

1. Remove the cotter pins and unscrew the nuts securing the tie rod end ball joint studs to the steering knuckles. Using puller 09568-31000, press the tie rod end ball joint studs out of the steering knuckles.
2. Remove the bolt connecting the universal joint and the steering gear pinion shaft.
3. Drain the fluid from the power steering hydraulic system.

4. Отсоедините напорный и возвратный шланги от картера рулевой передачи.

4. Disconnect the pressure and return hoses from the steering gear housing.
5. Remove the steering gear housing mounting bolts.
6. Remove the rear engine mount.
7. Remove the stabilizer bar.

8. Переместите рулевую передачу и достаньте ее с правой стороны автомобиля.

8. Move the steering gear and remove it from the right side of the vehicle.

When removing the steering gear, take care not to damage the boots.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.