Hyundai Kona Quiz
Engine Control System/Fuel System

Ambient Air Temperature Sensor (ATS) Repair Procedures

In this manual: Engine Control System/Fuel System
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
7steps
~42min
2/5difficulty
Done 0 of 7

Inspection

  1. Turn the ignition off.
  2. Disconnect the ATS connector.
  3. Measure the resistance between terminals 1 and 2 of the ATS [B1/S1].
  4. Make sure the resistance is within specification.

    Specification: Refer to "Specifications"

Removal

  1. Turn the ignition OFF and disconnect the negative (-) battery cable.
  2. Remove the front bumper. (Refer to Body - "Front Bumper")
  3. Disconnect the connector, then remove the ambient temperature sensor (A).

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.