Hyundai Kona Quiz
Engine Control System/Fuel System

RCV Control Solenoid Valve Repair Procedures

In this manual: Engine Control System/Fuel System
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
8steps
~48min
3/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 8

Inspection

  1. Turn the ignition off.
  2. Disconnect the RCV connector.
  3. Measure the resistance between RCV terminals 1 and 2.
  4. Make sure the resistance is within specification.

    Specification: Refer to "Specifications"

Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Remove the air cleaner cover (A). (Refer to Engine Mechanical System - "Air Cleaner")
  3. Disconnect the RCV control solenoid valve connector (A) and the vapor hoses (B).
  4. Remove the RCV control solenoid valve (D) by loosening the mounting bolts (C).

Installation

  1. Install in the reverse order of removal. RCV control solenoid valve bracket mounting bolt: 9.8–11.8 N·m

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.