Hyundai Kona Quiz
Engine Control System/Fuel System

Repair Procedures - CVVT Oil Control Valve (OCV)

In this manual: Engine Control System/Fuel System
General Information — 17Engine Mechanical System — 85Engine Electrical System — 50Emission Control System — 26Engine Control System/Fuel System — 152DCT (Dual Clutch Transmission) System — 50Four-Wheel Drive (4WD) System — 21Propeller Shaft and Axle (2WD-FF) — 28Suspension System (without ECS) — 32Steering — 21Restraints — 38Brake System — 64Body (Interior and Exterior) — 205Body Electrical System — 1Heating, Ventilation, and Air Conditioning — 66
7steps
~42min
3/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Inspection

  1. Turn the ignition off.
  2. Disconnect the OCV connector.
  3. Measure the resistance between terminals 1 and 2 of the OCV.
  4. Make sure the resistance is within specification.

    Specification: Refer to "Specifications"

Removal

  1. Turn the ignition OFF and disconnect the negative (-) battery cable.
  2. Disconnect the CVVT oil control valve connector (A).
  3. Remove the installation bolt (B) and remove the valve from the engine. [Bank 1 / Intake]
    [Bank 1/Exhaust]

Installation

  1. Install in the reverse order of removal. CVVT oil control valve mounting bolt: 9.8–11.8 N·m

Test yourself

A quick Hyundai Kona quiz: every answer comes with an explanation and a link to the manual page.