Engine Control/Fuel System

Variable Force Solenoid (VFS) Repair procedures

3steps
~18min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Removal

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.

  2. Disconnect the VFS connector (A).

  3. Remove the mounting bolts (B), and then remove the VFS from the engine.

    Variable force solenoid mounting bolt :

    9.8 - 11,8 N·m

Installation

  1. Install in the reverse order of removal.