Engine Mechanical System

Specification

~5min read

Contents:

Service Data

Service Data

General Information
Item Specification
Type In-line, DOHC
Number of cylinders 4
Bore [mm (in.)] 81.0 (3.1890)
Stroke [mm (in.)] 97.0 (3.8189)
Total displacement [cc (cu.in.)] 1,999 (121.99)
Compression ratio 12.5 ± 0.2 : 1
Firing order 1-3-4-2

Valve Timing
Item Specification Limit value
Intake valve (°) Opens (BTDC/ATDC) [38 - 2 (Initial position)] - [42]
Closes (ABDC/ABDC) [43 - 83 (Initial position)] - [123]
Exhaust valve (°) Opens (BBDC/ABDC) 54.0 - 6.0
Closes (ATDC/ATDC) 1.0 - 61.0

ATDC : After Top Dead Center BTDC : Before Top Dead Center ABDC : After Bottom Dead Center BBDC : Before Bottom Dead Center Cylinder Head
Item Specification Limit value
Flatness of gasket surface [mm, (in.)] Total 0.05 (0.0020)
100 x 100 0.02 (0.0008)

Camshaft
Item Specification Limit value
Cam height [mm, (in.)] Intake 39.00 (1.5354)
Exhaust 38.66 (1.5220)
Journal outer diameter [mm, (in.)] Intake NO.1 : 35.959 - 35.975 (1.41571 - 1.41634)
NO.2,3,4,5 : 22.959 - 22.975 (0.90390 - 0.90453)
Exhaust NO.1 : 35.959 - 35.975 (1.41571 - 1.41634)
NO.2,3,4,5 : 22.959 - 22.975 (0.90390 - 0.90453)
Bearing oil clearance [mm, (in.)] Intake No.1 : 0.032 - 0.062 mm
(0.00126 - 0.00244)
No.2,3,4,5 : 0.032 - 0.062
(0.00126 - 0.00244)
Exhaust No.1 : 0.032 - 0.062 mm
(0.00126 - 0.00244)
No.2,3,4,5 : 0.032 - 0.062
(0.00126 - 0.00244)
End play [mm, (in.)] 0.10 - 0.19 (0.0039 - 0.0075)

Valve
Item Specification Limit value
Valve length [mm, (in.)] Intake 102.22 (4.0244) 101.97 (4.0146)
Exhaust 104.04 (4.0961) 103.79 (4.0862)
Stem outer diameter [mm, (in.)] Intake 5.465 - 5.480 (0.2151 - 0.2157)
Exhaust 5.458 - 5.470 (0.2148 - 0.2153)
Face angle (°) 45.25 - 45.75
Thickness of valve head (margin) [mm, (in.)] Intake 1.47 - 1.71 (0.0555 - 0.0673)
Exhaust 1.55 - 1.71 (0.0610 - 0.0728)
Valve stem to valve guide clearance [mm, (in.)] Intake 0.020 - 0.052 (0.0008 - 0.0018)
Exhaust 0.030 ~ 0.054 (0.0012 - 0.0021)

Valve guide
Item Specification Limit value
Length [mm, (in.)] Intake 43.8 - 44.2 (1.7244 - 1.7402)
Exhaust 43.8 - 44.2 (1.7244 - 1.7402)
Cylinder I.D. [mm, (in.)] Intake/Exhaust 5.500 - 5.512 (0.2165 - 0.2170)

Valve spring
Item Specification Limit value
Free length [mm, (in.)] Intake 45.93 (1.8083)
Exhaust 45.93 (1.8083)
Load [kg / mm(N / in.) Intake 37.0 mm (1.4567 in.) 19.6 ± 1.0
27.0 mm (1.0630 in.) 45.7 ± 1.8
Exhaust 37.0 mm (1.4567 in.) 19.6 ± 1.0
27.0 mm (1.0630 in.) 45.7 ± 1.8
Out of squareness (°) Below 1.5

Cylinder Block
Item Specification Limit value
Bore [mm (in.)] 81.00 - 81.03
Flatness of gasket surface [mm, (in.)] Total 0.05
100 x 100 0.02

Piston
Item Specification Limit value
Piston outer diameter [mm, (in.)] 80.97 - 81.00
Piston to cylinder clearance [mm, (in.)] 0.02 - 0.04
Ring groove width [mm, (in.)] Piston ring (NO.1) 1.030 - 1.050
Piston ring (NO.2) 1.230 - 1.250
Oil ring 2.010 - 2.025

Piston ring
Item Specification Limit value
Side clearance [mm, (in.)] Piston ring (NO.1) 0.040 - 0.080
Piston ring (NO.2) 0.040 - 0.080
Oil ring 0.070 - 0.125
End gap [mm, (in.)] Piston ring (NO.1) 0.15 - 0.30
Piston ring (NO.2) 0.30 - 0.45
Oil ring 0.01 - 0.04

Piston pin
Item Specification Limit value
Piston pin outer diameter [mm, (in.)] 19.997 - 20.000 (0.7873 - 0.7874)
Piston pin hole inner diameter [mm, (in.)] 20.004 - 20.009 (0.78756 - 0.78775)
Piston pin hole clearance [mm, (in.)] 0.004 - 0.012 (0.00016 - 0.00047)
Connecting rod small end hole inner diameter [mm, (in.)] 20.007 - 20.015 (0.78768 - 0.78799)
Piston pin-to-connecting rod bushing oil clearance [mm, (in.)] 0.007 - 0.018 (0.00028 - 0.00071)

The connecting rod.
Item Specification Limit value
Connecting rod big end inner diameter [mm, (in.)] 48.000 - 48.018 (1.88976 - 1.89047)
Connecting rod bearing oil clearance [mm, (in.)] 0.026 - 0.044 (0.001024)
Side clearance [mm, (in.)] 0.10 - 0.25 (0.0039 - 0.0098)

Crankshaft
Item Specification Limit value
Main journal outer diameter [mm, (in.)] 54.942 - 54.960 (2.16307 - 2.16378)
Pin journal outer diameter [mm, (in.)] 44.954 - 44.972 (1.76984 - 1.77055)
Main bearing oil clearance [mm, (in.)] 0.016 - 0.034 (0.00063 - 0.00134)
End play [mm, (in.)] 0.070 - 0.250 (0.0028 - 0.0098)

Cooling System
Item Specification Limit value
Cooling method Forced circulation with water pump
Coolant quantity [ℓ (US gal., US qt., lmp qt.)] Approx. 6.0 (1.58 U.S.gal., 6.34 U.S.qt., 5.27 lmp.qt.)
pressure cap [kPa (kg/cm², psi)] High pressure valve opening pressure 93.16 - 122.58 kPa (0.95 - 1.25, 13.51 - 17.78)
Vacuum valve opening pressure Maximum 6.86 (0.07, 1.00)
Thermostat Type Wax pellet type
Opening temperature 88±1,5 °C
Full opening valve lift / temperature More than 8 mm (0.3 in.) / 115 °C

Tightening Torque ➤

Lubricant

Lubricant

Item Specification Limit value
Engine oil
Capacity Total 4.5 L (1.19 U.S.gal., 4.76 U.S.qt., 3.96 lmp.qt.) Required for engine replacement
Oil pan 3.7 L (0.98 U.S.gal., 3.91 U.S.qt., 3.26 lmp.qt.)
Drain and refill 4.0 L (1.06 U.S.gal., 4.23 U.S.qt., 3.52 lmp.qt.) Including oil filter
Oil grade Oil grade API SN PLUS / SP or ILSAC GF-6 / 0W - 20
SAE viscosity Corresponding viscosity oil by temperature "Lubrication System"
Oil pressure (at idle) [kPa (kg/cm², psi) 90.22 kPa (0.92 kgf/cm², 13.09 psi) or above Oil temperature (oil pan): 110±2 °C

Note
Never use any additives to engine oil, as they can change the properties of engine oil which can cause serious engine failure.