Kia Cee'd Quiz
Fuel System

Repair Procedures - CVVT Oil Control Valve (OCV)

In this manual: Fuel System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
7steps
~42min
3/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Inspection

  1. Turn the ignition off.
  2. Disconnect the OCV connector.
  3. Measure the resistance between terminals 1 and 2 of the OCV.
  4. Make sure the resistance is within specification.

    Specification: Refer to "Specifications"

Removal

  1. Turn the ignition OFF and disconnect the negative (-) battery cable.
  2. Disconnect the CVVT oil control valve connector (A).
  3. Remove the installation bolt (B) and remove the valve from the engine. [Bank 1 / Intake]
    [Bank 1/Exhaust]

Installation

  1. Installation is the reverse of removal. CVVT oil control valve mounting bolt: 9.8 ~ 11.8 N·m

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.