Kia Cee'd Quiz
Fuel System

Repair Procedures for Variable Intake Solenoid (VIS)

In this manual: Fuel System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
7steps
~42min
3/5difficulty
Done 0 of 7

Inspection

  1. Turn the ignition off.
  2. Disconnect the VIS valve connector.
  3. Measure the resistance between terminals 1 and 2 of the VIS valve.

    Specification: Refer to "Specifications"

Removal

  1. Turn the ignition OFF and disconnect the negative (-) battery cable.
  2. Disconnect the variable intake solenoid connector (A).
  3. Disconnect the vacuum hoses (B) from the valve.
  4. Loosen the mounting bolt, then remove the valve (C) from the expansion tank.

Installation

  1. Installation is the reverse of removal.

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.