Kia Cee'd Quiz
Fuel System

Knock Sensor (KS) Repair Procedures

In this manual: Fuel System
General Information — 15Maintenance — 7Engine Mechanical System — 84Engine Electrical System — 49Emission Control System — 22Fuel System — 95Clutch System — 28Manual Transmission — 21Dual Clutch Transmission (DCT) System — 47Drive Shaft and Axle — 20Suspension System — 36Steering — 23Restraints — 39Brake System — 54Body (Interior and Exterior) — 209Body Electrical System — 254Heating, Ventilation, and Air Conditioning — 56
4steps
~24min
2/5difficulty
0102030405024.518N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Removal

  1. Turn the ignition OFF and disconnect the negative (-) battery cable.
  2. Remove the intake manifold. (Refer to Engine Mechanical System - "Intake Manifold")
  3. Disconnect the injector connector (A).
  4. Remove the mounting bolt (B) and remove the sensor from the cylinder block.

Installation

  1. Installation is the reverse of removal. Knock sensor bolt: 18.6 ~ 24 N·m

Test yourself

A quick Kia Cee'd quiz: every answer comes with an explanation and a link to the manual page.